Disclaimer
How to change front lower arm on NISSAN Note (E11, NE11) – replacement guide
downloads:
24
Views:
467
Important!
This replacement procedure can be used for:
NISSAN Note (E11, NE11) 1.5 dCi, NISSAN Note (E11, NE11) 1.4, NISSAN Note (E11, NE11) 1.6, NISSAN Note (E11, NE11) 1.5 dCi, NISSAN Note (E11, NE11) 1.5 dCi, NISSAN Note (E11, NE11) 1.5 dCi … View more
The steps may slightly vary depending on the car design.
NISSAN Note (E11, NE11) 1.5 dCi, NISSAN Note (E11, NE11) 1.4, NISSAN Note (E11, NE11) 1.6, NISSAN Note (E11, NE11) 1.5 dCi, NISSAN Note (E11, NE11) 1.5 dCi, NISSAN Note (E11, NE11) 1.5 dCi … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Control Arm for Note (E11, NE11) and other NISSAN models
Alternative products

Wire brush
WD-40 spray
All-purpose cleaning spray
Ceramic grease
Torque wrench
Combination spanner #16
Combination spanner #18
Drive socket # 16
Drive socket # 17
Drive socket # 18
Wheel impact socket #17
Ratchet wrench
Tap wrench
Flat chisel
Hammer
Crow bar
Hydraulic transmission jack
Wheel chock
Replacement: front lower arm – NISSAN NOTE (E11). Tip from AUTODOC experts:
- The replacement procedure is identical for the left and right lower control arms.
- All work should be done with the engine stopped.
Replacement: front lower arm – NISSAN NOTE (E11). Use the following procedure:
- Step 1Secure the wheels with chocks.Step 2
Loosen the wheel bolts. Use wheel impact socket #17. Use a tap wrench. - Step 3Raise the car.Replacement: front lower arm – NISSAN NOTE (E11). Tip:If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.Step 4
Unscrew the wheel bolts.AUTODOC recommends:To avoid injury, hold up the wheel when unscrewing the bolts. - Step 5
Remove the wheel. - Step 6
Clean the control arm fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the front fastener of the control arm. Use a drive socket #17. Use a ratchet wrench. - Step 8
Unscrew the fastener connecting the ball joint to the steering knuckle. Use a combination spanner #16. Use a drive socket #16. Use a ratchet wrench. - Step 9
Remove the fastening bolt. - Step 10
Release the fastener connecting the ball joint to the steering knuckle. Use a flat metal-working chisel. Use a hammer. - Step 11
Disconnect the ball joint from the steering knuckle. - Step 12
Unscrew the rear fastener of the control arm. Use a combination spanner #18. Use a drive socket #18. Use a ratchet wrench. - Step 13
Remove the fastening bolts. - Step 14
Remove the control arm. Use a crowbar. - Step 15
Clean the suspension arm mounting seats. Use a wire brush. Use all-purpose cleaning spray. - Step 16
Install the new control arm. - Step 17
Install the fastening bolts.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the NISSAN Note I (E11, NE11) model
Popular maintenance tutorials for Nissan Note E11
Complete guides for changing the Control arm on different NISSAN NOTE models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your NISSAN Note (E11, NE11)
View more
How to Get the Best Deals on Car Parts | Save Money with AUTODOC
#DIY Wheel Rim Restoration: Revive Scratches and Chips Easily!
TOP 8 mistakes car owners make | AUTODOC tips
Easy Steps to Fix Minor Scratches on Your Vehicle | AUTODOC tips
Most commonly replaced car parts on NISSAN NOTE
Time to replace parts? Get even better deals in our Shop app.

SCAN ME






























