Disclaimer
How to change rear wheel bearing on NISSAN Note (E11, NE11) – replacement guide
downloads:
30
Views:
971
Important!
This replacement procedure can be used for:
NISSAN Note (E11, NE11) 1.5 dCi, NISSAN Note (E11, NE11) 1.4, NISSAN Note (E11, NE11) 1.6, NISSAN Note (E11, NE11) 1.5 dCi, NISSAN Note (E11, NE11) 1.5 dCi, NISSAN Note (E11, NE11) 1.5 dCi … View more
The steps may slightly vary depending on the car design.
NISSAN Note (E11, NE11) 1.5 dCi, NISSAN Note (E11, NE11) 1.4, NISSAN Note (E11, NE11) 1.6, NISSAN Note (E11, NE11) 1.5 dCi, NISSAN Note (E11, NE11) 1.5 dCi, NISSAN Note (E11, NE11) 1.5 dCi … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Wheel Bearing for Note (E11, NE11) and other NISSAN models
Alternative products

WD-40 spray
All-purpose cleaning spray
Multipurpose grease
Copper grease
Torque wrench
Drive socket # 30
Wheel impact socket #17
Tap wrench
Hammer
Rubber mallet
Bush and bearing driver set
Circlip pliers
Crow bar
Wheel chock
Replacement: wheel bearing – NISSAN NOTE (E11). AUTODOC experts recommend:
- Do not re-use the bearing assembly of your NISSAN NOTE (E11) car.
- The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
- All work should be done with the engine stopped.
Replacement: wheel bearing – NISSAN NOTE (E11). Use the following procedure:
- Step 1Secure the wheels with chocks.Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the rear of the car and secure on supports.Step 4
Unscrew the wheel bolts.Replacement: wheel bearing – NISSAN NOTE (E11). Professionals recommend:To avoid injury, hold up the wheel when unscrewing the bolts. - Step 5
Remove the wheel. - Step 6
Remove the hub bearing protection cap. Use a hammer. Use a crowbar.Replacement: wheel bearing – NISSAN NOTE (E11). Tip:Some cars are not equipped with wheel hub caps. - Step 7Clean the wheel hub fastener. Use WD-40 spray.Step 8
Unscrew the wheel hub axle nut. Use a drive socket #30. Use a tap wrench. - Step 9
Remove the brake drum assembled with the wheel hub bearing.Replacement: wheel bearing – NISSAN NOTE (E11). AUTODOC experts recommend:Examine the brake drum. Replace it if necessary. - Step 10
Clean the fasteners of the wheel hub bearing. - Step 11
Remove the wheel hub bearing retaining ring. Use circlip pliers. - Step 12
Press out the wheel hub bearing. Use a bush and bearing driver set. - Step 13
Clean the hub bearing mounting seat. Use WD-40 spray. - Step 14
Press fit the new wheel hub bearing into the brake drum. Use a bush and bearing driver set.Replacement: wheel bearing – NISSAN NOTE (E11). Tip from AUTODOC experts:Check to make sure the wheel hub bearing is positioned correctly. Avoid its misalignment. Stop pressing on the surface of the bearing immediately after it has been fitted into its mounting seat. - Step 15
Install the wheel hub bearing retaining ring. Use circlip pliers.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the NISSAN Note I (E11, NE11) model
Popular maintenance tutorials for Nissan Note E11
Complete guides for changing the Wheel bearings on different NISSAN NOTE models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your NISSAN Note (E11, NE11)
View more
7 signs of faulty fuel injectors | AUTODOC tips
Transform Your Old Engine Valve Cover: Quick Polishing Tips for a Shiny Finish | AUTODOC Tips
Stop Rust Before It Starts: Top 5 Tips for Car Body Protection | AUTODOC Insights
5 possible reasons why your car heater isn't working
Most commonly replaced car parts on NISSAN NOTE
Time to replace parts? Get even better deals in our Shop app.

SCAN ME



























