Important!

This replacement procedure can be used for:
RENAULT MEGANE II Saloon (LM0/1_) 1.4, RENAULT MEGANE II Saloon (LM0/1_) 1.6, RENAULT MEGANE II Saloon (LM0/1_) 1.5 dCi (LM0F, LM0T, LM2B), RENAULT MEGANE II Saloon (LM0/1_) 1.5 dCi (LM02, LM13, LM2A), RENAULT MEGANE II Saloon (LM0/1_) 1.5 dCi (LM1F), RENAULT MEGANE II Saloon (LM0/1_) 1.5 dCi (LM1E) … View more

The steps may slightly vary depending on the car design.

How to change front springs / front coil springs on RENAULT MEGANE 2 (LM) [TUTORIAL AUTODOC]

All the parts you need to replace – Springs for MEGANE II Saloon (LM0/1_) and other RENAULT models

Alternative products

Coil spring

SKCS-0040308 STARK Coil spring

16,97 GBP

Shop

188C0157 RIDEX Coil spring

19,64 GBP

Shop

2010-0775 PROFIT Coil spring

20,85 GBP

Shop

SKCS-0040156 STARK Coil spring

21,13 GBP

Shop

RH2712 KYB Coil spring

27,00 GBP

Shop

JCS459 TRW Coil spring

31,36 GBP

Shop

997 908 SACHS Coil spring

34,83 GBP

Shop

2240582 METZGER Coil spring

36,05 GBP

Shop

997 907 SACHS Coil spring

37,11 GBP

Shop

SR071MT Magnum Technology Coil spring

37,26 GBP

Shop

Replacement: coil springs – Renault Megane 2. Tools you might need:

                      Wire brush
                    
                      WD-40 spray
                    
                      Copper grease 
                    
                      Drive socket # 13 
                    
                      Drive socket # 19 
                    
                      HEX bit No.H6.
                    
                      Combination spanner #17
                    
                      Combination spanner #18
                    
                      Combination spanner #19
                    
                      Wheel impact socket #19
                    
                      Ratchet wrench
                    
                      Torque wrench
                    
                      Tap wrench
                    
                      Hammer
                    
                      Flat chisel
                    
                      Clip removal tool
                    
                      Crow bar
                    
                      Hydraulic transmission jack
                    
                      Hydraulic strut spring compressor
                    
                      Fender cover
                    
                      Wheel chock

Buy tools

Replacement: coil springs – Renault Megane 2. Tip from AUTODOC:

Both coil springs of the front suspension should be replaced simultaneously.
The replacement procedure is identical for the left and right coil springs of the front suspension.
All work should be done with the engine stopped.

Carry out replacement in the following order:

Step 1

Open the bonnet.
Step 2

Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
Step 3

Remove the retainers of the shock strut mount cap. Use a clip removal tool.
Step 4

Raise a little the shock strut mount cap. Treat the fasteners of the shock strut mount. Use WD-40 spray.
Step 5

Loosen the upper fastener of the shock strut mount. Use a drive socket #13. Use a ratchet wrench.
Step 6

Secure the wheels with chocks.
Step 7

Loosen the wheel mounting bolts. Use wheel impact socket #19.
Step 8

Raise the front of the car and secure on supports.
Step 9

Unscrew the wheel bolts.

AUTODOC recommends:
Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. Renault Megane 2
Step 10

Remove the wheel.
Step 11

Disconnect the wiring and the brake hose from the bracket on the shock strut. Use a crowbar.
Step 12

Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
Step 13

Unscrew the nut and remove the stabilizer rod from the shock strut. Use HEX No.H6. Use a combination spanner #17.
Step 14

Clean the fasteners connecting the shock strut to the steering knuckle. Use a wire brush. Use WD-40 spray.
Step 15

Unscrew the lower fastener of the shock absorber strut. Use a drive socket #19. Use a tap wrench.
Step 16

Remove the fastening bolt.

Replacement: coil springs – Renault Megane 2. Tip from AUTODOC experts:
Make sure that the steering knuckle is supported.
Step 17

Disconnect the steering knuckle from the shock absorber strut. Use a hammer. Use a flat metal-working chisel.
Step 18

Unscrew the upper fastening of the shock absorber strut. Use a drive socket #13. Use a ratchet wrench.

AUTODOC recommends:
Important! Hold the suspension strut while unscrewing the fastening bolts. Renault Megane 2
Step 19

Remove the suspension strut.
Step 20

Set the shock absorber strut on the spring compressor tool.

Replacement: coil springs – Renault Megane 2. Professionals recommend:
Note that when using a spring compressor, spring coils need to be securely gripped, compressing the spring on the opposite sides.Ensure the correct position of the spring in the retainer.Make sure that the spring coils tightly entered the lock handles.
Step 21

Compress the spring.
Step 22

Remove the strut piston rod nut. Use HEX No.H6. Use a combination spanner #18. Use a ratchet wrench.
Step 23

Remove the top strut mount.
Step 24

Release the coil spring.
Step 25

Remove the spring.
Step 26

Remove the shock absorber dust cap and the bump stop.
Step 27

Install the boot and a bump stop onto the shock absorber.
Step 28

Install the spring on the shock absorber.
Step 29

Compress the spring.
Step 30

Install the upper strut mount and the strut mount bearing.
Step 31

Tighten the shock strut piston rod nut. Use HEX No.H6. Use a combination spanner #18. Use a torque wrench. Tighten it to 62 Nm torque.

Replacement: coil springs – Renault Megane 2. AUTODOC experts recommend:
Check to make sure the spring is positioned correctly. Avoid its misalignment. Important! Be sure to use new fasteners.
Step 32

Decompress the spring.
Step 33

Remove the assembled shock strut.
Step 34

Install the shock strut into the wheel arch.
Step 35

Secure the upper fasteners of the shock strut (3 pieces). Do not tighten it.

Replacement: coil springs – Renault Megane 2. Tip from AUTODOC:
To avoid injuries, hold the shock strut when screwing the fastening bolts in.
Step 36

Treat the shock strut mounting seat on the steering knuckle. Use a wire brush. Use WD-40 spray.
Step 37

Fix the shock absorber strut on the steering knuckle.

Step 38

Prop up the steering knuckle. Use a hydraulic transmission jack.
Step 39

Install and tighten a new bolt of the steering knuckle. Use a drive socket #19. Use a combination spanner #19. Use a torque wrench. Tighten it to 105 Nm torque.
Step 40

Remove the support from under the steering knuckle.

AUTODOC recommends:
Replacement: coil springs – Renault Megane 2. Lower the transmission jack smoothly, without jerks, to avoid damaging components and mechanisms.
Step 41

Connect the fastener of the ABS sensor cable to the shock absorber strut. Fasten the brake hose on the strut.
Step 42

Secure the stabilizer link on the suspension strut. Use HEX No.H6. Use a combination spanner #17. Use a torque wrench. Tighten it to 44 Nm torque.
Step 43

Clean the wheel rim mounting seat. Use a wire brush. Treat the contacting surface. Use copper grease.
Step 44

Install the wheel.

AUTODOC recommends:
Warning! To avoid injury, hold the wheel while screwing in the fastening bolts on the car. Renault Megane 2
Step 45

Screw in the wheel bolts. Use wheel impact socket #19.
Step 46

Lower the car and working in a cross order, tighten the wheel bolts. Use wheel impact socket #19. Use a torque wrench. Tighten it to 110 Nm torque.
Step 47

Tighten the shock strut top mount. Use a drive socket #13. Use a torque wrench. Tighten it to 21 Nm torque.
Step 48

Install the shock strut mount cap.
Step 49

Install the retainers of the shock strut mount cap.
Step 50

Remove the fender protection cover.

Step 51

Close the hood.
Step 52

Remove the jacks and chocks.

Was this manual helpful?

Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.

Need New Tyres?

Find out which tyre and wheel sizes are compatible with the RENAULT Megane II Saloon (LM) model

RENAULT MEGANE II Saloon (LM0/1_) tyre size

How to change rear coil springs on Renault Megane 2 – replacement guide

Free download PDF
2.42 MB
How to change front suspension strut on Renault Megane 2 – replacement guide

Free download PDF
2.99 MB
How to change rear shock absorbers on RENAULT MEGANE II Saloon (LM0/1_) – replacement guide

Free download PDF
1.86 MB
How to change rear brake pads on Renault Megane 2 – replacement guide

Free download PDF
2.49 MB
How to change front brake pads on RENAULT MEGANE II Saloon (LM0/1_) – replacement guide

Free download PDF
1.51 MB
How to change rear brake discs on Renault Megane 2 – replacement guide

Free download PDF
2.08 MB

How to change front coil springs on RENAULT Megane II Hatchback (BM, CM) – replacement guide

Free download PDF
3.61 MB
How to change rear coil springs on RENAULT MEGANE II (BM0/1_, CM0/1_) – replacement guide

Free download PDF
1.58 MB
How to change front coil springs on RENAULT Megane II Sport Tourer (KM) – replacement guide

Free download PDF
3.57 MB
How to change rear coil springs on Renault Megane 2 – replacement guide

Free download PDF
2.42 MB
How to change coil springs on a car – replacement tutorial

Universal

Free download PDF
1.91 MB
How to change front coil springs on Renault Kangoo KC01 – replacement guide

Free download PDF
3.05 MB

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

How to Safely Wash Your Car in Winter Without Damage | AUTODOC tips

3K views

Published on: 31/01/2024
How do EGR valves work? | AUTODOC

21K views

Published on: 18/07/2020
Checking the starter without removing it | AUTODOC tips

26K views

Published on: 01/12/2020
5 Ways You’re Scrubbing Your Car Wrong | AUTODOC Tips

5K views

Published on: 23/09/2021