Important!

This replacement procedure can be used for:
RENAULT MEGANE II (BM0/1_, CM0/1_) 1.5 dCi (BM1E, CM1E), RENAULT MEGANE II (BM0/1_, CM0/1_) 1.5 dCi (BM1F, CM1F), RENAULT MEGANE II (BM0/1_, CM0/1_) 1.4 16V, RENAULT MEGANE II (BM0/1_, CM0/1_) 1.5 dCi (BM02, BM13, BM2A, CM02, CM13), RENAULT MEGANE II (BM0/1_, CM0/1_) 1.6 16V (BM0C, CM0C), RENAULT MEGANE II (BM0/1_, CM0/1_) 1.4 16V (BM0B, CM0B) … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Springs for MEGANE II (BM0/1_, CM0/1_) and other RENAULT models

Coil spring

        Coil spring for Megane II Hatchback (BM, CM) Petrol (98 hp)
      
        Coil spring for Megane II Hatchback (BM, CM) Petrol (113 hp)
      
        Coil spring for Megane II Hatchback (BM, CM) Diesel (101 hp)
      
        Coil spring for Megane II Hatchback (BM, CM) Petrol (82 hp)
      
        Coil spring for Megane II Hatchback (BM, CM) Diesel (86 hp)
      
        Coil spring for Megane II Hatchback (BM, CM) Diesel (106 hp)

Replacement: coil springs – RENAULT MEGANE II (BM0/1_, CM0/1_). Tools you might need:

                        Wire brush
                      
                        WD-40 spray
                      
                        Copper grease 
                      
                        Drive socket # 13 
                      
                        Drive socket # 19 
                      
                        HEX bit No.H6.
                      
                        Combination spanner #17
                      
                        Combination spanner #18
                      
                        Combination spanner #19
                      
                        Wheel impact socket #19
                      
                        Ratchet wrench
                      
                        Torque wrench
                      
                        Tap wrench
                      
                        Hammer
                      
                        Flat chisel
                      
                        Clip removal tool
                      
                        Crow bar
                      
                        Hydraulic transmission jack
                      
                        Hydraulic strut spring compressor
                      
                        Fender cover
                      
                        Wheel chock

Buy tools

Replacement: coil springs – RENAULT MEGANE II (BM0/1_, CM0/1_). Tip from AUTODOC:

Both coil springs of the front suspension should be replaced simultaneously.
The replacement procedure is identical for the left and right coil springs of the front suspension.
All work should be done with the engine stopped.

Carry out replacement in the following order:

Step 1

Open the bonnet.

Step 2

Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.

Step 3

Remove the retainers of the shock strut mount cap. Use a clip removal tool.
Step 4

Raise a little the shock strut mount cap. Treat the fasteners of the shock strut mount. Use WD-40 spray.
Step 5

Loosen the upper fastener of the shock strut mount. Use a drive socket #13. Use a ratchet wrench.
Step 6

Secure the wheels with chocks.
Step 7

Loosen the wheel mounting bolts. Use wheel impact socket #19.
Step 8

Raise the front of the car and secure on supports.

Step 9

Unscrew the wheel bolts.

AUTODOC recommends:
Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. RENAULT MEGANE II (BM0/1_, CM0/1_)
Step 10

Remove the wheel.
Step 11

Disconnect the wiring and the brake hose from the bracket on the shock strut. Use a crowbar.
Step 12

Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
Step 13

Unscrew the nut and remove the stabilizer rod from the shock strut. Use HEX No.H6. Use a combination spanner #17.
Step 14

Clean the fasteners connecting the shock strut to the steering knuckle. Use a wire brush. Use WD-40 spray.
Step 15

Unscrew the lower fastener of the shock absorber strut. Use a drive socket #19. Use a tap wrench.
Step 16

Remove the fastening bolt.

Replacement: coil springs – RENAULT MEGANE II (BM0/1_, CM0/1_). Tip from AUTODOC experts:
Make sure that the steering knuckle is supported.
Step 17

Disconnect the steering knuckle from the shock absorber strut. Use a hammer. Use a flat metal-working chisel.
Step 18

Unscrew the upper fastening of the shock absorber strut. Use a drive socket #13. Use a ratchet wrench.

AUTODOC recommends:
Important! Hold the suspension strut while unscrewing the fastening bolts. RENAULT MEGANE II (BM0/1_, CM0/1_)
Step 19

Remove the suspension strut.
Step 20

Set the shock absorber strut on the spring compressor tool.

Replacement: coil springs – RENAULT MEGANE II (BM0/1_, CM0/1_). Professionals recommend:
Note that when using a spring compressor, spring coils need to be securely gripped, compressing the spring on the opposite sides.Ensure the correct position of the spring in the retainer.Make sure that the spring coils tightly entered the lock handles.
Step 21

Compress the spring.
Step 22

Remove the strut piston rod nut. Use HEX No.H6. Use a combination spanner #18. Use a ratchet wrench.
Step 23

Remove the top strut mount.
Step 24

Release the coil spring.
Step 25

Remove the spring.
Step 26

Remove the shock absorber dust cap and the bump stop.
Step 27

Install the boot and a bump stop onto the shock absorber.
Step 28

Install the spring on the shock absorber.
Step 29

Compress the spring.
Step 30

Install the upper strut mount and the strut mount bearing.
Step 31

Tighten the shock strut piston rod nut. Use HEX No.H6. Use a combination spanner #18. Use a torque wrench. Tighten it to 62 Nm torque.

Replacement: coil springs – RENAULT MEGANE II (BM0/1_, CM0/1_). AUTODOC experts recommend:
Check to make sure the spring is positioned correctly. Avoid its misalignment. Important! Be sure to use new fasteners.
Step 32

Decompress the spring.
Step 33

Remove the assembled shock strut.
Step 34

Install the shock strut into the wheel arch.
Step 35

Secure the upper fasteners of the shock strut (3 pieces). Do not tighten it.

Replacement: coil springs – RENAULT MEGANE II (BM0/1_, CM0/1_). Tip from AUTODOC:
To avoid injuries, hold the shock strut when screwing the fastening bolts in.
Step 36

Treat the shock strut mounting seat on the steering knuckle. Use a wire brush. Use WD-40 spray.
Step 37

Fix the shock absorber strut on the steering knuckle.

Step 38

Prop up the steering knuckle. Use a hydraulic transmission jack.
Step 39

Install and tighten a new bolt of the steering knuckle. Use a drive socket #19. Use a combination spanner #19. Use a torque wrench. Tighten it to 105 Nm torque.
Step 40

Remove the support from under the steering knuckle.

AUTODOC recommends:
Replacement: coil springs – RENAULT MEGANE II (BM0/1_, CM0/1_). Lower the transmission jack smoothly, without jerks, to avoid damaging components and mechanisms.
Step 41

Connect the fastener of the ABS sensor cable to the shock absorber strut. Fasten the brake hose on the strut.
Step 42

Secure the stabilizer link on the suspension strut. Use HEX No.H6. Use a combination spanner #17. Use a torque wrench. Tighten it to 44 Nm torque.
Step 43

Clean the wheel rim mounting seat. Use a wire brush. Treat the contacting surface. Use copper grease.
Step 44

Install the wheel.

AUTODOC recommends:
Warning! To avoid injury, hold the wheel while screwing in the fastening bolts on the car. RENAULT MEGANE II (BM0/1_, CM0/1_)
Step 45

Screw in the wheel bolts. Use wheel impact socket #19.
Step 46

Lower the car and working in a cross order, tighten the wheel bolts. Use wheel impact socket #19. Use a torque wrench. Tighten it to 110 Nm torque.
Step 47

Tighten the shock strut top mount. Use a drive socket #13. Use a torque wrench. Tighten it to 21 Nm torque.
Step 48

Install the shock strut mount cap.
Step 49

Install the retainers of the shock strut mount cap.
Step 50

Remove the fender protection cover.

Step 51

Close the hood.

Step 52

Remove the jacks and chocks.

Was this manual helpful?

Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.

Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the RENAULT Megane II Hatchback (BM, CM) model.

Browse tyres

How to change front suspension strut on RENAULT MEGANE II (BM0/1_, CM0/1_) – replacement guide

Free download PDF
2.69 MB
How to change rear coil springs on RENAULT MEGANE II (BM0/1_, CM0/1_) – replacement guide

Free download PDF
1.58 MB
How to change rear shock absorbers on RENAULT MEGANE II (BM0/1_, CM0/1_) – replacement guide

Free download PDF
1.86 MB
How to change front brake pads on RENAULT MEGANE II (BM0/1_, CM0/1_) – replacement guide

Free download PDF
1.51 MB
How to change rear brake pads on RENAULT MEGANE II (BM0/1_, CM0/1_) – replacement guide

Free download PDF
1.37 MB
How to change front brake discs on RENAULT Megane II Hatchback (BM, CM) – replacement guide

Free download PDF
2.61 MB

How to change rear coil springs on RENAULT MEGANE II (BM0/1_, CM0/1_) – replacement guide

Free download PDF
1.58 MB
How to change front coil springs on RENAULT Megane II Sport Tourer (KM) – replacement guide

Free download PDF
3.57 MB
How to change front coil springs on Renault Megane 2 – replacement guide

Free download PDF
3.56 MB
How to change rear coil springs on Renault Megane 2 – replacement guide

Free download PDF
2.42 MB
How to change coil springs on a car – replacement tutorial

Universal

Free download PDF
1.91 MB
How to change rear coil springs on Renault Clio 2 – replacement guide

Free download PDF
1.66 MB

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!

Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.

Scan

To download the app:

- scan the QR code
- download from App Store
- download from Google Play

How to prevent car windows from fogging up | AUTODOC tips

12K views

Published on: 04/02/2021
4 reasons why your CHECK ENGINE light is on | AUTODOC tips

6K views

Published on: 30/03/2022
What to do if your car's air conditioning isn't working properly | AUTODOC tips

6K views

Published on: 05/08/2021
Headlight Restoration | AUTODOC tips

8K views

Published on: 13/01/2021