Disclaimer
How to change rear brake discs on Renault Megane 2 – replacement guide
downloads:
20
Views:
381
Recommended replacement interval for the part category Brake disc : 50000 km
Important!
This replacement procedure can be used for:
RENAULT MEGANE II Saloon (LM0/1_) 1.4, RENAULT MEGANE II Saloon (LM0/1_) 1.6, RENAULT MEGANE II Saloon (LM0/1_) 2.0, RENAULT MEGANE II Saloon (LM0/1_) 1.5 dCi (LM0F, LM0T, LM2B), RENAULT MEGANE II Saloon (LM0/1_) 1.9 dCi (LM0G, LM1G, LM2C), RENAULT MEGANE II Saloon (LM0/1_) 1.9 dCi, RENAULT MEGANE II Saloon (LM0/1_) 1.5 dCi (LM02, LM13, LM2A), RENAULT MEGANE II Saloon (LM0/1_) 1.5 dCi (LM1F), RENAULT MEGANE II Saloon (LM0/1_) 1.5 dCi (LM1E), RENAULT MEGANE II Saloon (LM0/1_) 1.9 dCi, RENAULT MEGANE II Saloon (LM0/1_) 1.9 dCi (LM14, LM1D), RENAULT MEGANE II Saloon (LM0/1_) 1.6 16V (LM1R, LM0C), RENAULT MEGANE II Saloon (LM0/1_) 1.5 dCi (LM16), RENAULT MEGANE II Saloon (LM0/1_) 1.6, RENAULT MEGANE II Saloon (LM0/1_) 1.9 dCi, RENAULT MEGANE II Saloon (LM0/1_) 2.0 … View more
The steps may slightly vary depending on the car design.
RENAULT MEGANE II Saloon (LM0/1_) 1.4, RENAULT MEGANE II Saloon (LM0/1_) 1.6, RENAULT MEGANE II Saloon (LM0/1_) 2.0, RENAULT MEGANE II Saloon (LM0/1_) 1.5 dCi (LM0F, LM0T, LM2B), RENAULT MEGANE II Saloon (LM0/1_) 1.9 dCi (LM0G, LM1G, LM2C), RENAULT MEGANE II Saloon (LM0/1_) 1.9 dCi, RENAULT MEGANE II Saloon (LM0/1_) 1.5 dCi (LM02, LM13, LM2A), RENAULT MEGANE II Saloon (LM0/1_) 1.5 dCi (LM1F), RENAULT MEGANE II Saloon (LM0/1_) 1.5 dCi (LM1E), RENAULT MEGANE II Saloon (LM0/1_) 1.9 dCi, RENAULT MEGANE II Saloon (LM0/1_) 1.9 dCi (LM14, LM1D), RENAULT MEGANE II Saloon (LM0/1_) 1.6 16V (LM1R, LM0C), RENAULT MEGANE II Saloon (LM0/1_) 1.5 dCi (LM16), RENAULT MEGANE II Saloon (LM0/1_) 1.6, RENAULT MEGANE II Saloon (LM0/1_) 1.9 dCi, RENAULT MEGANE II Saloon (LM0/1_) 2.0 … View more
The steps may slightly vary depending on the car design.
How to change rear brake discs / rear brake rotors on RENAULT MEGANE 2 (LM) [TUTORIAL AUTODOC]

All the parts you need to replace – Brake Discs for MEGANE II Saloon (LM0/1_) and other RENAULT models
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Multipurpose grease
Copper grease
Combination spanner №15
Drive socket # 13
Drive socket # E16
Drive socket # 30
Wheel impact socket #19
Ratchet wrench
Torque wrench
Brake caliper wind back tool
Tap wrench
Hammer
Rubber mallet
Crow bar
Wheel chock
Replacement: brake discs – Renault Megane 2. AUTODOC recommends:
- Replace the brake disks on the car Renault Megane 2 in complete set for each axis. Regardless of the state of components. This will ensure even braking.
- The replacement procedure is identical for both brake disks on the same axle.
- When changing the brake discs, always replace the brake pads.
- Warning! Shut down the engine before starting any work – Renault Megane 2.
Carry out replacement in the following order:
- Step 1
Open the bonnet. Unscrew the brake fluid reservoir cap. - Step 2
Secure the wheels with chocks. - Step 3
Loosen the wheel mounting bolts. Use wheel impact socket #19. - Step 4
Raise the rear of the car and secure on supports. - Step 5
Unscrew the wheel bolts.Replacement: brake discs – Renault Megane 2. Tip:To avoid injury, hold up the wheel when unscrewing the bolts. - Step 6
Remove the wheel. - Step 7
Spread the brake pads. Use a crowbar. - Step 8
Clean the brake caliper fasteners. Use a wire brush. Use WD-40 spray. - Step 9
Unscrew the brake caliper fastening. Use a combination spanner #15. Use a drive socket #13. Use a ratchet wrench. - Step 10
Remove the brake caliper.Replacement: brake discs – Renault Megane 2. AUTODOC experts recommend:Tie the caliper to the suspension or to the body with a wire without disconnecting from the brake hose to prevent depressurization of the brake system.Make sure that the brake caliper is not hanging on the brake hose.Don't press the brake pedal after the brake caliper has been removed. As a result, the piston can fall out from the brake cylinder, and brake fluid leakage and depressurization of the system may occur. - Step 11
Remove the brake pads. Use a crowbar. - Step 12
Clean the brake caliper bracket fasteners. Use WD-40 spray. - Step 13
Unscrew the caliper bracket fastening. Use a drive socket #E16. Use a tap wrench. - Step 14
Remove the caliper bracket. - Step 15
Pry up and remove the wheel hub cap. Use a crowbar. Use a hammer. - Step 16
Unscrew the hub lock nut. Use a drive socket #30. Use a tap wrench. - Step 17
Remove the brake disc. - Step 18
Install the brake disc. - Step 19
Screw the wheel hub lock nut. Use a drive socket #30. Use a torque wrench. Tighten it to 175 Nm torque. - Step 20
Treat the hub where it contacts the brake disk. Use a multipurpose grease.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the RENAULT Megane II Saloon (LM) model
Popular maintenance tutorials for RENAULT MEGANE II Saloon (LM0/1_)
Complete guides for changing the Brake rotors on different RENAULT MEGANE models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your RENAULT MEGANE II Saloon (LM0/1_)
View more
Discover the 4 Key Reasons Your CHECK ENGINE Light Could Be On | AUTODOC Tips
The most common problems when buying a used car | AUTODOC
#DIY Wheel Rim Restoration: Revive Scratches and Chips Easily!
Cold starts | 5 mistakes that wreck your car
Most commonly replaced car parts on RENAULT MEGANE
Time to replace parts? Get even better deals in our Shop app.

SCAN ME

































