Recommended replacement interval for the part category Brake disc : 50000 km

Important!

This replacement procedure can be used for:
NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.5 dCi, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.6, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2.0, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2.0 Allrad, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.6 dCi Allrad, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.6 dCi, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.5 dCi, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2.0 dCi, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2.0 dCi Allrad, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.5 dCi, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2.0, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2.0 Allrad, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.6 LPG, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 2.0 … View more

The steps may slightly vary depending on the car design.

How to change front brake discs / brake rotors on NISSAN QASHQAI (J10, NJ10) [TUTORIAL AUTODOC]

All the parts you need to replace – Brake Discs for Qashqai / Qashqai +2 I (J10, NJ10) and other NISSAN models

Alternative products

Brake disc

BG4109 DELPHI Brake disc

24,95 GBP

Shop

SKBD-0022806 STARK Brake disc

30,77 GBP

Shop

N2016V LPR Brake disc

32,51 GBP

Shop

BG4283 DELPHI Brake disc

33,43 GBP

Shop

82B0391 RIDEX Brake disc

35,06 GBP

Shop

SKBD-0022346 STARK Brake disc

36,43 GBP

Shop

SKBD-0022037 STARK Brake disc

36,53 GBP

Shop

82B0391P RIDEX PLUS Brake disc

37,94 GBP

Shop

0 986 479 358 BOSCH Brake disc

39,01 GBP

Shop

09.A716.14 BREMBO Brake disc

40,02 GBP

Shop

Replacement: brake discs – Nissan Qashqai J10. Tools you need:

                      Wire brush
                    
                      Nylon cleaning brush
                    
                      WD-40 spray
                    
                      Brake cleaner 
                    
                      Copper grease 
                    
                      Torque wrench
                    
                      Combination spanner #17
                    
                      Drive socket # 14
                    
                      Drive socket # 19
                    
                      Wheel impact socket #21
                    
                      Brake caliper wind back tool
                    
                      Ratchet wrench
                    
                      Tap wrench
                    
                      Crow bar
                    
                      Wheel chock

Buy tools

Replacement: brake discs – Nissan Qashqai J10. AUTODOC recommends:

Replace the brake disks on the car Nissan Qashqai J10 in complete set for each axis. Regardless of the state of components. This will ensure even braking.
The replacement procedure is identical for both brake disks on the same axle.
When changing the brake discs, always replace the brake pads.
Warning! Shut down the engine before starting any work – Nissan Qashqai J10.

Carry out replacement in the following order:

Step 1

Open the bonnet. Unscrew the brake fluid reservoir cap.
Step 2

Secure the wheels with chocks.

Step 3

Loosen the wheel mounting bolts. Use wheel impact socket #21.
Step 4

Raise the front of the car and secure on supports.
Step 5

Unscrew the wheel bolts.

Replacement: brake discs – Nissan Qashqai J10. Tip from AUTODOC:
To avoid injury, hold up the wheel when unscrewing the bolts.
Step 6

Remove the wheel.
Step 7

Spread the brake pads. Use a crowbar.
Step 8

Clean the brake caliper fasteners. Use a wire brush. Use WD-40 spray.
Step 9

Unscrew the brake caliper fastening. Use a combination spanner #17. Use a drive socket #14. Use a ratchet wrench.
Step 10

Remove the brake caliper.

Replacement: brake discs – Nissan Qashqai J10. AUTODOC experts recommend:
Tie the caliper to the suspension or to the body with a wire without disconnecting from the brake hose to prevent depressurization of the brake system.Make sure that the brake caliper is not hanging on the brake hose.Don't press the brake pedal after the brake caliper has been removed. As a result, the piston can fall out from the brake cylinder, and brake fluid leakage and depressurization of the system may occur. Check the brake caliper bracket, brake caliper guide pins and boots. Clean them. Replace, if necessary.
Step 11

Remove the brake pads. Use a crowbar.
Step 12

Clean the brake caliper bracket fasteners. Use a wire brush. Use WD-40 spray.
Step 13

Unscrew the caliper bracket fastening. Use a drive socket #19. Use a tap wrench.
Step 14

Remove the caliper bracket.
Step 15

Remove the brake disc.
Step 16

Clean the hub. Use a wire brush. Treat the contacting surface. Use copper grease.
Step 17

Install the brake disc.
Step 18

Clean the brake caliper bracket from dirt and dust. Use a wire brush. Use a brake cleaner.

AUTODOC recommends:
Replacement: brake discs – Nissan Qashqai J10. After applying the spray, wait a few minutes.
Step 19

Install the brake caliper bracket.
Step 20

Tighten the brake caliper bracket. Use a drive socket #19. Use a torque wrench. Tighten it to 152 Nm torque.
Step 21

Install the brake pads.
Step 22

Treat the brake caliper piston. Use a nylon cleaning brush. Use a brake cleaner.

Replacement: brake discs – Nissan Qashqai J10. Tip:
After applying the spray, wait a few minutes.
Step 23

Press in the brake caliper piston. Use brake caliper wind back tool.
Step 24

Install the brake caliper and fix it. Use a combination spanner #17. Use a drive socket #14. Use a torque wrench. Tighten it to 34 Nm torque.
Step 25

Treat the surface where the brake disc contacts the wheel rim. Use copper grease.
Step 26

Clean the brake disk surface. Use a brake cleaner.

Replacement: brake discs – Nissan Qashqai J10. Tip from AUTODOC experts:
After applying the spray, wait a few minutes.
Step 27

Install the wheel.

AUTODOC recommends:
Important! Hold the wheel while screwing in the fastening bolts. Nissan Qashqai J10
Step 28

Screw in the wheel bolts. Use wheel impact socket #21.
Step 29

Lower the car and working in a cross order, tighten the wheel bolts. Use wheel impact socket #21. Use a torque wrench. Tighten it to 112 Nm torque.
Step 30

Remove the jacks and chocks.

Replacement: brake discs – Nissan Qashqai J10. Tip:
Check the brake fluid level in the expansion tank and refill if necessary.
Step 31

Tighten the brake fluid reservoir cap.

AUTODOC recommends:
Nissan Qashqai J10 – Without starting the engine, press the brake pedal several times until it feels firm.
Step 32

Close the hood.

Comments – 2

@user_2121524

19.03.2025 06:15

Member

Clean job! Well done!
- Graziana Venturi
  
  19.03.2025 10:01
  
  @user_2121524
  
  Moderator
  
  Thanks for your positive comment! Stay connected with us!