When to replace the Brake Discs on your HONDA FR-V
Recommended replacement interval for the part category Brake disc : 50000 km
Important!
This replacement procedure can be used for:
HONDA FR-V (BE) 2.2 i CTDi (BE5), HONDA FR-V (BE) 2.0 (BE3), HONDA FR-V (BE) 1.7 (BE1), HONDA FR-V (BE) 1.8 (BE1) View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

Tools
Replacement: brake discs – HONDA FR-V (BE). List of the tools you'll need:
Wire brush
Nylon cleaning brush
WD-40 spray
Brake cleaner
Anti-squeal paste
Ceramic grease
Torque wrench
Combination spanner #17
Drive socket # 13
Drive socket # 17
Wheel impact socket #19
Ratchet wrench
Tap wrench
Brake caliper wind back tool
Phillips screwdriver
Crow bar
Impact screwdriver
Hammer
Wheel chock
Replacement: brake discs – HONDA FR-V (BE). AUTODOC experts recommend:
  • Replace the brake disks on the car HONDA FR-V (BE) in pairs on an axle, regardless of the condition of the components. This will ensure even braking.
  • The replacement procedure is identical for both brake disks on the same axle.
  • When changing the brake discs, always replace the brake pads.
  • All work should be done with the engine stopped.
Replacement: brake discs – HONDA FR-V (BE). Recommended sequence of steps:
  1. Step 1
    Open the bonnet.
    Step 2
    How to change Brake Discs on HONDA FR-V (BE) 2004 - free PDF and video manuals
    Remove the cowl grille seal.
  2. Step 3
    Remove the plastic panel.
    Step 4
    How to replace HONDA FR-V (BE) 2.2 i CTDi (BE5) 2005 Brake Discs - step-by-step manuals and video guides
    Unscrew the brake fluid reservoir cap.
  3. Step 5
    Secure the wheels with chocks.
    Step 6
    HONDA FR-V (BE) 1.8 (BE1) 2006 Brake Discs replacement: free workshop manuals
    Loosen the wheel bolts. Use wheel impact socket #19. Use a tap wrench.
  4. Step 7
    Raise the car.
    Replacement: brake discs – HONDA FR-V (BE). Tip:
    If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.
    Step 8
    Changing Brake Discs on HONDA FR-V (BE) 1.7 (BE1) 2007 by yourself
    Unscrew the wheel bolts.
    AUTODOC recommends:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  5. Step 9
    How to remove HONDA FR-V 1.7 Vtec 4x4 (BE2) 2008 Brake Discs - online easy-to-follow instructions
    Remove the wheel.
  6. Step 10
    How to replace Brake Discs on HONDA FR-V (BE) 2009: download PDF manuals and video instructions
    Spread the brake pads. Use a crowbar.
  7. Step 11
    How hard is it to do yourself: Brake Discs replacement on HONDA FR-V (BE) 2.2 i CTDi (BE5) 2010 - download illustrated guide
    Clean the brake caliper fasteners. Use a wire brush. Use WD-40 spray.
  8. Step 12
    Need to know how to renew Brake Discs on HONDA FR-V 2011? This free workshop manual will help you to do it yourself
    Unscrew the brake caliper fasteners. Use a combination spanner #17. Use a drive socket #13. Use a ratchet wrench.
  9. Step 13
    Changing of Brake Discs on HONDA FR-V (BE) 2012 won't be an issue if you follow this illustrated step-by-step guide
    Remove the fastening bolts.
  10. Step 14
    HONDA FR-V 2.0 (BE3) Brake Discs replacement: online guides and video tutorials
    Remove the brake caliper.
    Replacement: brake discs – HONDA FR-V (BE). AUTODOC recommends:
    Tie the caliper to the suspension or to the body with a wire without disconnecting from the brake hose to prevent depressurization of the brake system.Make sure that the brake caliper is not hanging on the brake hose.Don't press the brake pedal after the brake caliper has been removed. As a result, the piston can fall out from the brake cylinder, and brake fluid leakage and depressurization of the system may occur.
  11. Step 15
    Replacing Brake Discs on HONDA FR-V (BE) 2014 2.2 i CTDi (BE5) by yourself
    Remove the brake pads.
  12. Step 16
    FR-V (BE) 1.7 Vtec 4x4 (BE2) 2015 Brake Discs DIY replacement workshop manual
    Clean the brake caliper bracket fasteners. Use a wire brush. Use WD-40 spray.
  13. Step 17
    How to change Brake Discs on HONDA FR-V (BE) 2016 - tips and tricks
    Unscrew the brake caliper bracket fasteners. Use a drive socket #17. Use a ratchet wrench.
  14. Step 18
    Remove the fastening bolts.
    Step 19
    Step-by-step recommendations for DIY replacement HONDA FR-V (BE) 2017 1.7 Vtec 4x4 (BE2) Brake Discs
    Remove the brake caliper bracket.
  15. Step 20
    DIY replacement of Brake Discs on HONDA FR-V (BE) 2.0 (BE3) 2018 is not an issue anymore with our step-by-step tutorial
    Clean the brake disc fasteners. Use a wire brush. Use WD-40 spray.
  16. Step 21
    How to change Brake Discs on HONDA FR-V (BE) 2004 - free PDF and video manuals
    Unscrew the brake disc fasteners. Use a Phillips screwdriver. Use an impact screwdriver. Use a hammer.
  17. Step 22
    How to replace HONDA FR-V (BE) 2.2 i CTDi (BE5) 2005 Brake Discs - step-by-step manuals and video guides
    Remove the fastening bolts.
  18. Step 23
    HONDA FR-V (BE) 1.8 (BE1) 2006 Brake Discs replacement: free workshop manuals
    Remove the brake disc.
  19. Step 24
    Changing Brake Discs on HONDA FR-V (BE) 1.7 (BE1) 2007 by yourself
    Clean the wheel hub. Use a wire brush.
  20. Step 25
    Treat the contacting surface. Use ceramic grease.
    Step 26
    How to remove HONDA FR-V 1.7 Vtec 4x4 (BE2) 2008 Brake Discs - online easy-to-follow instructions
    Clean the brake disk surface. Use a brake cleaner.
  21. Step 27
    How to replace Brake Discs on HONDA FR-V (BE) 2009: download PDF manuals and video instructions
    Install a new brake disc.
  22. Step 28
    How hard is it to do yourself: Brake Discs replacement on HONDA FR-V (BE) 2.2 i CTDi (BE5) 2010 - download illustrated guide
    Install the fastening bolts.
  23. Step 29
    Need to know how to renew Brake Discs on HONDA FR-V 2011? This free workshop manual will help you to do it yourself
    Tighten the brake disc fasteners. Use a Phillips screwdriver. Use a torque wrench. Tighten it to 10 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the HONDA FR-V (BE) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
HONDA FR-V (BE) Brake Discs replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY HONDA FR-V (BE) Brake Discs replacement - online guide
Tips & tricks for your HONDA FR-V (BE)
View more
  • How to change Brake rotors on HONDA FR-V (BE) 2.0 (BE3) - replacement tricks
    How to restore a damaged thread | AUTODOC tips
  • Changing Brake disc HONDA FR-V (BE) 2.2 i CTDi (BE5) - Replacement Tips
    Coolant comparison test | AUTODOC
  • Maintenance Hacks - HONDA FR-V (BE) 1.8 (BE1) Brake disc kit replacement guide
    How to polish your car | AUTODOC tips
  • Replace Disc brake set on HONDA FR-V (BE) - free video tips
    What to do if your car's air conditioning isn't working properly | AUTODOC tips