
Disclaimer
How to change front anti roll bar links on HONDA FR-V (BE) – replacement guide
downloads:
5
Views:
55
Important!
This replacement procedure can be used for:
HONDA FR-V (BE) 2.2 i CTDi (BE5), HONDA FR-V (BE) 2.0 (BE3), HONDA FR-V (BE) 1.7 (BE1), HONDA FR-V (BE) 1.8 (BE1), HONDA FR-V (BE) 2.4 (BE8), HONDA FR-V (BE) 2.0 (BE3) … View more
The steps may slightly vary depending on the car design.
HONDA FR-V (BE) 2.2 i CTDi (BE5), HONDA FR-V (BE) 2.0 (BE3), HONDA FR-V (BE) 1.7 (BE1), HONDA FR-V (BE) 1.8 (BE1), HONDA FR-V (BE) 2.4 (BE8), HONDA FR-V (BE) 2.0 (BE3) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for FR-V (BE) and other HONDA models
Anti-roll bar link
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #14
HEX bit no.H6.
Wheel impact socket #19
Ratchet wrench
Torque wrench
Crow bar
Wheel chock
AUTODOC recommends:
- Replace the stabiliser links on HONDA FR-V (BE) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- Please note: all work on the car – HONDA FR-V (BE) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Secure the wheels with chocks.
- Step 2Loosen the wheel mounting bolts. Use wheel impact socket #19.
- Step 3Raise the front of the car and secure on supports.Step 4Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. HONDA FR-V (BE)
- Step 5Remove the wheel.
- Step 6Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
- Step 7Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #14 (2 pieces).
- Step 8Unscrew the fastener connecting the stabilizer link to the control arm. Use a combination spanner #14 (2 pieces).
- Step 9Remove the stabilizer rod.
- Step 10Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.Step 11Ιnstall the transverse stabilizer link. Use a crowbar.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the HONDA FR-V (BE) model
Popular maintenance tutorials for HONDA FR-V (BE)
Complete guides for changing the Drop links on different HONDA FR-V models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your HONDA FR-V (BE)
View more
- Can You Hear Your Brakes Squeaking? Learn the Causes and DIY Solutions! | AUTODOC Tips
- How to tighten cylinder head bolts
- Revitalize Your Car Interior: DIY Steering Wheel Cover with AUTODOC Tips
- Checking the starter without removing it | AUTODOC tips
Most commonly replaced car parts on HONDA FR-V
Time to replace parts? Get even better deals in our Shop app.

SCAN ME