Important!
This replacement procedure can be used for:
VW Bora Saloon (1J2) 1.6, VW Bora Saloon (1J2) 2.0, VW Bora Saloon (1J2) 2.3 V5, VW Bora Saloon (1J2) 1.9 TDI, VW Bora Saloon (1J2) 1.9 TDI, VW Bora Saloon (1J2) 1.4 16V, VW Bora Saloon (1J2) 1.9 SDI, VW Bora Saloon (1J2) 2.8 V6 4motion, VW Bora Saloon (1J2) 1.8 4motion, VW Bora Saloon (1J2) 2.3 V5 4motion, VW Bora Saloon (1J2) 1.9 TDI 4motion, VW Bora Saloon (1J2) 1.9 TDI, VW Bora Saloon (1J2) 1.9 TDI 4motion, VW Bora Saloon (1J2) 1.6 16V, VW Bora Saloon (1J2) 1.9 TDI, VW Bora Saloon (1J2) 1.9 TDI 4motion, VW Bora Saloon (1J2) 1.9 TDI, VW Bora Saloon (1J2) 1.9 TDI 4motion, VW Bora Saloon (1J2) 1.6, VW Bora Saloon (1J2) 2.3 V5, VW Bora Saloon (1J2) 2.3 V5 4motion, VW Bora Saloon (1J2) 1.8 T, VW Bora Saloon (1J2) 2.0 4motion, VW Bora Saloon (1J2) 1.9 TDI, VW Bora Saloon (1J2) 1.9 TDI 4motion, VW Bora Saloon (1J2) 1.6 FSI, VW Bora Saloon (1J2) 1.8 T View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Suspension Ball Joint for Bora Saloon (1J2) and other VW models
Tools
Replacement: ball joint – VW BORA (1J2). Tools you need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
High-temperature ceramic grease
Torque wrench
Drive socket # 13
Drive socket # 16
Drive socket # 30
Combination spanner #18
Wheel impact socket #17
Ratchet wrench
Crow bar
Ball joint puller
Rubber mallet
Pin punch
Wheel chock
Replacement: ball joint – VW BORA (1J2). Tip:
  • The replacement procedure is identical for the left and right ball joints.
  • All work should be done with the engine stopped.
Replacement: ball joint – VW BORA (1J2). Take the following steps:
  1. Step 1
    Secure the wheels with chocks.
    Step 2
    How to change Suspension Ball Joint on VW Bora 1j2 1998 - free PDF and video manuals
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  2. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    How to replace VW Bora Saloon (1J2) 1.6 1999 Suspension Ball Joint - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. VW BORA (1J2)
  3. Step 5
    VW Bora 1j2 1.6 16V 2000 Suspension Ball Joint replacement: free workshop manuals
    Remove the wheel.
  4. Step 6
    Changing Suspension Ball Joint on VW Bora Saloon (1J2) 2.0 2001 by yourself
    Clean the ball joint fasteners. Use a wire brush. Use WD-40 spray.
  5. Step 7
    How to remove VW BORA 2.3 V5 2002 Suspension Ball Joint - online easy-to-follow instructions
    Unscrew the ball joint fastening to the steering knuckle. Use a combination spanner #18.
  6. Step 8
    How to replace Suspension Ball Joint on VW Bora Saloon (1J2) 2003: download PDF manuals and video instructions
    Loosen the fastener of the driveshaft. Use a drive socket #30. Use a ratchet wrench.
  7. Step 9
    How hard is it to do yourself: Suspension Ball Joint replacement on VW Bora 1j2 1.6 2004 - download illustrated guide
    Remove the drive shaft. Use a pin punch. Use a rubber mallet.
  8. Step 10
    Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
    Step 11
    Need to know how to renew Suspension Ball Joint on VW BORA 2005? This free workshop manual will help you to do it yourself
    Unscrew the fastener connecting the stabilizer link to the control arm. Use a drive socket #16. Use a ratchet wrench.
  9. Step 12
    Remove the fastening bolt.
    Step 13
    Changing of Suspension Ball Joint on VW Bora 1j2 1998 won't be an issue if you follow this illustrated step-by-step guide
    Disconnect the ball joint from the steering knuckle. Use a ball joint puller.
  10. Step 14
    VW BORA 1.9 TDI Suspension Ball Joint replacement: online guides and video tutorials
    Unscrew the fastener connecting the ball joint to the suspension control arm. Use a drive socket #13. Use a ratchet wrench.
  11. Step 15
    Remove the fastening bolts.
    Step 16
    Replacing Suspension Ball Joint on VW Bora 1j2 2000 1.6 by yourself
    Remove the ball joint.
  12. Step 17
    Bora Saloon (1J2) 2.3 V5 2001 Suspension Ball Joint DIY replacement workshop manual
    Clean the ball joint mounting seat. Use a wire brush. Use WD-40 spray.
  13. Step 18
    How to change Suspension Ball Joint on VW Bora Saloon (1J2) 2002 - tips and tricks
    Install a new ball joint.
    AUTODOC recommends:
    Do not damage the ball joint cover.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the VW Bora Saloon (1J2) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
VW Bora Saloon (1J2) Suspension Ball Joint replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY VW Bora Saloon (1J2) Suspension Ball Joint replacement - online guide
Tips & tricks for your VW Bora Saloon (1J2)
View more
  • How to change Suspension ball joint on VW Bora Saloon (1J2) 1.9 TDI - replacement tricks
    How to remove rust | AUTODOC tips
  • Changing Suspension ball joint VW Bora 1j2 1.6 - Replacement Tips
    Checking the starter without removing it | AUTODOC tips
  • Maintenance Hacks - VW Bora Saloon (1J2) 1.6 16V Suspension ball joint replacement guide
    How to paint a car with a spray can | AUTODOC tips
  • Replace Suspension ball joint on VW Bora 1j2 - free video tips
    Things you should never do with your manual transmission | AUTODOC tips