Important!

This replacement procedure can be used for:
SEAT Cordoba Saloon (6L2) 1.2, SEAT Cordoba Saloon (6L2) 1.4 16V, SEAT Cordoba Saloon (6L2) 1.9 TDI, SEAT Cordoba Saloon (6L2) 1.9 TDI, SEAT Cordoba Saloon (6L2) 1.9 SDI, SEAT Cordoba Saloon (6L2) 1.4 16V, SEAT Cordoba Saloon (6L2) 1.4 TDI, SEAT Cordoba Saloon (6L2) 1.6, SEAT Cordoba Saloon (6L2) 2.0, SEAT Cordoba Saloon (6L2) 1.4 TDI, SEAT Cordoba Saloon (6L2) 1.4 TDI, SEAT Cordoba Saloon (6L2) 1.2 12V, SEAT Cordoba Saloon (6L2) 1.4 16V, SEAT Cordoba Saloon (6L2) 1.6 16V … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Suspension Ball Joint for Cordoba Saloon (6L2) and other SEAT models

Ball Joint

        Ball Joint for Córdoba II Saloon (6L2) Petrol (64 hp)
      
        Ball Joint for Córdoba II Saloon (6L2) Petrol (75 hp)
      
        Ball Joint for Córdoba II Saloon (6L2) Diesel (131 hp)
      
        Ball Joint for Córdoba II Saloon (6L2) Diesel (100 hp)
      
        Ball Joint for Córdoba II Saloon (6L2) Diesel (64 hp)
      
        Ball Joint for Córdoba II Saloon (6L2) Petrol (100 hp)
      
        Ball Joint for Córdoba II Saloon (6L2) Diesel (75 hp)
      
        Ball Joint for Córdoba II Saloon (6L2) Petrol (101 hp)
      
        Ball Joint for Córdoba II Saloon (6L2) Petrol (115 hp)

Replacement: ball joint – SEAT CORDOBA (6L2). Tools you might need:

                        Wire brush
                      
                        WD-40 spray
                      
                        Brake cleaner 
                      
                        Copper grease 
                      
                        Torque wrench
                      
                        Combination spanner #18
                      
                        Combination spanner #19
                      
                        Drive socket # 13 
                      
                        Wheel impact socket #17
                      
                        Ratchet wrench
                      
                        Tap wrench
                      
                        Ball joint puller
                      
                        Crow bar
                      
                        Wheel chock

Buy tools

Replacement: ball joint – SEAT CORDOBA (6L2). AUTODOC experts recommend:

The replacement procedure is identical for the left and right ball joints.
Please note: all work on the car – SEAT CORDOBA (6L2) – should be done with the engine switched off.

Carry out replacement in the following order:

Step 1

Secure the wheels with chocks.
Step 2

Loosen the wheel mounting bolts. Use wheel impact socket #17.
Step 3

Raise the front of the car and secure on supports.

Step 4

Unscrew the wheel bolts.

Replacement: ball joint – SEAT CORDOBA (6L2). Tip:
To avoid injury, hold up the wheel when unscrewing the bolts.
Step 5

Remove the wheel.
Step 6

Clean all joints of the arm. Use a wire brush. Use WD-40 spray.
Step 7

Unscrew the ball joint fastening to the steering knuckle. Use a combination spanner #18.
Step 8

Unscrew the fastener connecting the ball joint to the suspension control arm. Use a drive socket #13. Use a tap wrench.
Step 9

Disconnect the spherical joint from the arm.
Step 10

Disconnect the ball joint from the steering knuckle. Use a crowbar. Use a ball joint puller.
Step 11

Remove the ball joint.
Step 12

Clean the ball joint mounting seat. Use a wire brush. Use WD-40 spray.
Step 13

Install a new ball joint.

Replacement: ball joint – SEAT CORDOBA (6L2). Tip from AUTODOC:
Do not damage the ball joint cover.
Step 14

Connect the ball joint to the steering knuckle.
Step 15

Screw the fasteners of the ball joint. Use a combination spanner #19.
Step 16

Attach the ball joint to the control arm.
Step 17

Screw the fasteners of the ball joint. Use a drive socket #13. Use a ratchet wrench.
Step 18

Tighten the ball joint fastener. Use a drive socket #13. Use a torque wrench. Tighten it to 20 Nm torque.+90°

AUTODOC recommends:
Important! Be sure to use new fasteners.
Step 19

Tighten the ball joint fastener. Use a combination spanner #19. Use a torque wrench. Tighten it to 45 Nm torque.+90°

AUTODOC recommends:
Important! Be sure to use new fasteners.
Step 20

Treat the fasteners of the ball joint. Use copper grease.
Step 21

Treat the surface where the brake disc contacts the wheel rim. Use copper grease.
Step 22

Clean the brake disk surface. Use a brake cleaner.

AUTODOC recommends:
Replacement: ball joint – SEAT CORDOBA (6L2). After applying the spray, wait a few minutes.
Step 23

Install the wheel.

AUTODOC recommends:
Important! Hold the wheel while screwing in the fastening bolts. SEAT CORDOBA (6L2)
Step 24

Screw in the wheel bolts. Use wheel impact socket #17.
Step 25

Lower the car and working in a cross order, tighten the wheel bolts. Use wheel impact socket #17. Use a torque wrench. Tighten it to 120 Nm torque.
Step 26

Remove the jacks and chocks.

Was this manual helpful?

Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.

Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the SEAT Córdoba II Saloon (6L2) model.

Browse tyres

How to change front lower arm on SEAT Cordoba Saloon (6L2) – replacement guide

Free download PDF
2.04 MB
How to change track rod end on SEAT Córdoba II Saloon (6L2) – replacement guide

Free download PDF
1.53 MB
How to change front anti roll bar links on SEAT Córdoba II Saloon (6L2) – replacement guide

Free download PDF
1.32 MB
How to change front strut mount on SEAT Córdoba II Saloon (6L2) – replacement guide

Free download PDF
3.75 MB
How to change rear wheel bearing on SEAT Córdoba II Saloon (6L2) – replacement guide

Free download PDF
1.85 MB
How to change rear strut mount on SEAT Córdoba II Saloon (6L2) – replacement guide

Free download PDF
2.06 MB

How to change front ball joint on SEAT Córdoba I Saloon (6K1, 6K2) – replacement guide

Free download PDF
1.73 MB
How to change ball joint on a car – replacement tutorial

Universal

Free download PDF
2.05 MB
How to change front ball joint on Seat Ibiza 6L1 – replacement guide

Free download PDF
1.71 MB
How to change front ball joint on SEAT Leon Hatchback (1M1) – replacement guide

Free download PDF
1.4 MB
How to change front ball joint on SEAT Toledo II Saloon (1M2) – replacement guide

Free download PDF
1.4 MB
How to change front ball joint on SEAT AROSA (6H) – replacement guide

Free download PDF
1.58 MB

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!

Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.

Scan

To download the app:

- scan the QR code
- download from App Store
- download from Google Play

How to check your head gasket | AUTODOC

9K views

Published on: 13/10/2020
4 reasons why your CHECK ENGINE light is on | AUTODOC tips

6K views

Published on: 30/03/2022
How to wash your car in winter | AUTODOC tips

3K views

Published on: 31/01/2024
TOP 4 car cleaning products | AUTODOC tips

2K views

Published on: 26/08/2021