
Disclaimer
How to change rear wheel bearing on RENAULT KANGOO (KC0/1_) – replacement guide
downloads:
9
Views:
174
Important!
This replacement procedure can be used for:
RENAULT KANGOO (KC0/1_) 1.2 (KC0A, KC0K, KC0F, KC01), RENAULT KANGOO (KC0/1_) 1.4 (KC0C, KC0H, KC0B, KC0M), RENAULT KANGOO (KC0/1_) D 55 1.9 (KC0D), RENAULT KANGOO (KC0/1_) D 65 1.9 (KC0E, KC02, KC0J, KC0N), RENAULT KANGOO (KC0/1_) 1.5 dCi, RENAULT KANGOO (KC0/1_) 1.6 16V bivalent, RENAULT KANGOO (KC0/1_) 1.5 dCi, RENAULT KANGOO (KC0/1_) 1.5 dCi … View more
The steps may slightly vary depending on the car design.
RENAULT KANGOO (KC0/1_) 1.2 (KC0A, KC0K, KC0F, KC01), RENAULT KANGOO (KC0/1_) 1.4 (KC0C, KC0H, KC0B, KC0M), RENAULT KANGOO (KC0/1_) D 55 1.9 (KC0D), RENAULT KANGOO (KC0/1_) D 65 1.9 (KC0E, KC02, KC0J, KC0N), RENAULT KANGOO (KC0/1_) 1.5 dCi, RENAULT KANGOO (KC0/1_) 1.6 16V bivalent, RENAULT KANGOO (KC0/1_) 1.5 dCi, RENAULT KANGOO (KC0/1_) 1.5 dCi … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Wheel Bearing for KANGOO (KC0/1_) and other RENAULT models
Wheel bearing kit
Alternative products

Wire brush
WD-40 spray
All-purpose cleaning spray
Copper grease
Drive socket # 30
Wheel impact socket #19
Rubber mallet
Tap wrench
Hammer
Crow bar
Wheel chock
Replacement: wheel bearing – RENAULT KANGOO (KC0/1_). AUTODOC experts recommend:
- Do not re-use the bearing assembly of your RENAULT KANGOO (KC0/1_) car.
- The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
- Please note: all work on the car – RENAULT KANGOO (KC0/1_) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Secure the wheels with chocks.
- Step 2Loosen the wheel mounting bolts. Use wheel impact socket #19.
- Step 3Raise the rear of the car and secure on supports.Step 4Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. RENAULT KANGOO (KC0/1_)
- Step 5Remove the wheel.
- Step 6Clean the brake drum. Use a wire brush. Use WD-40 spray.
- Step 7Remove the hub bearing protection cap. Use a hammer. Use a crowbar.Replacement: wheel bearing – RENAULT KANGOO (KC0/1_). Professionals recommend:Some cars are not equipped with wheel hub caps.
- Step 8Unscrew the wheel hub axle nut. Use a drive socket #30. Use a tap wrench.
- Step 9Remove the brake drum assembled with the wheel hub bearing.
- Step 10Clean the hub bearing mounting seat. Use all-purpose cleaning spray.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the RENAULT Kangoo I (KC) model
Popular maintenance tutorials for Renault Kangoo kc01
Complete guides for changing the Wheel bearings on different RENAULT KANGOO models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your RENAULT KANGOO (KC0/1_)
View more
- Save Money on Fuel with These Easy Tips | AUTODOC
- How to Install a New Windscreen Yourself | AUTODOC Expert Tips
- How to replace a timing chain yourself
- Deep interior cleaning | Car transformation by detailing
Most commonly replaced car parts on RENAULT KANGOO
Time to replace parts? Get even better deals in our Shop app.

SCAN ME