Disclaimer
How to change front anti roll bar links on TOYOTA PRIUS (ZVW3_) – replacement guide
downloads:
3
Views:
48
Important!
This replacement procedure can be used for:
TOYOTA PRIUS (ZVW3_) 1.8 Plug-in Hybrid (ZVW30, ZVW35), TOYOTA PRIUS (ZVW3_) 1.8 Hybrid (ZVW3_), TOYOTA PRIUS (ZVW3_) 1.8 Hybrid (ZVW30) … View more
The steps may slightly vary depending on the car design.
TOYOTA PRIUS (ZVW3_) 1.8 Plug-in Hybrid (ZVW30, ZVW35), TOYOTA PRIUS (ZVW3_) 1.8 Hybrid (ZVW3_), TOYOTA PRIUS (ZVW3_) 1.8 Hybrid (ZVW30) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for PRIUS (ZVW3_) and other TOYOTA models
Alternative products
Anti-roll bar link
Wire brush
WD-40 spray
Copper grease
Drive socket # 17
Wheel impact socket #21
Torque wrench
Tap wrench
Wheel chock
AUTODOC recommends:
- Replace the stabiliser links on TOYOTA PRIUS (ZVW3_) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – TOYOTA PRIUS (ZVW3_). Take the following steps:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #21. - Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. TOYOTA PRIUS (ZVW3_) - Step 5
Remove the wheel. - Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a drive socket #17. Use a tap wrench. - Step 8
Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #17. Use a tap wrench. - Step 9
Remove the stabilizer rod.Replacement: anti roll bar links – TOYOTA PRIUS (ZVW3_). AUTODOC experts recommend:Examine stabiliser bushes. Replace them if needed. - Step 10
Install a new rod, tighten the fasteners.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the TOYOTA Prius III Hatchback (XW30) model
Popular maintenance tutorials for Toyota Prius 3
Free download PDF
1.41 MB
Free download PDF696.32 KB
Free download PDF542.72 KB
Free download PDF2.04 MB
Free download PDF2.78 MB
Free download PDF665.6 KB
Complete guides for changing the Drop links on different TOYOTA PRIUS models
Free download PDF1.23 MB
Free download PDF1.17 MB
Free download PDF1.17 MB
Free download PDF1.24 MB
Free download PDF1.24 MB
Free download PDF972.8 KB
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your TOYOTA PRIUS (ZVW3_)
View more
Transform Your Old Engine Valve Cover: Quick Polishing Tips for a Shiny Finish | AUTODOC Tips
DIY jack restoration | AUTODOC tips
DIY car soundproofing | AUTODOC tips
How to align the timing marks correctly on an EA888 engine
Most commonly replaced car parts on TOYOTA PRIUS
Time to replace parts? Get even better deals in our Shop app.
SCAN ME