How to change pollen filter on TOYOTA PRIUS (ZVW3_) – replacement guide
downloads:
3
Views:
87
0
Users voted – 0
Recommended replacement interval for the part category Pollen filter : 30000km
Important!
This replacement procedure can be used for:
TOYOTA PRIUS (ZVW3_) 1.8 Plug-in Hybrid (ZVW30, ZVW35),
TOYOTA PRIUS (ZVW3_) 1.8 Hybrid (ZVW30)
…
View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Pollen Filter for PRIUS (ZVW3_) and other TOYOTA models
Replacement: pollen filter – TOYOTA PRIUS (ZVW3_). Tip from AUTODOC:
Replace the cabin filter at least once every six months, in early spring and autumn seasons.
Follow the terms, recommendations and requirements of the part operation provided by the manufacturer.
If the air flow into the cabin has sharply reduced, replace the filter before a scheduled maintenance.
Warning! Shut down the engine before starting any work – TOYOTA PRIUS (ZVW3_).
Carry out replacement in the following order:
Step 1
Open the glove box.
Step 2
Detach the stopper (strap) from the glove box lid.
Step 3
Release the cabin filter cover clips.
Step 4
Remove the cabin filter housing cover.
AUTODOC recommends:
Replacement: pollen filter – TOYOTA PRIUS (ZVW3_). To avoid damaging the part when removing it, do not use excessive force.
Step 5
Remove the cabin filter.
AUTODOC recommends:
Do not attempt to clean and reuse the filter - it will affect the quality of air cleaning inside the car.
Step 6
Install the cabin filter to its mounting seat.
Replacement: pollen filter – TOYOTA PRIUS (ZVW3_). Tip from AUTODOC experts:
Check out the correct location of the filter element. Do not skew.Follow the air flow direction arrow on the filter.TOYOTA PRIUS (ZVW3_) – It's important to only use high-quality filters.
Step 7
Reinstall the cabin filter housing cover. Make sure you hear a click indicating that it is locked in place.
Step 8
Attach the stopper (strap) to the glove box lid.
Step 9
Close the glove box.
Step 10
Switch on the ignition.
Step 11
Switch on the air conditioning system. This is necessary in order to make sure that the component operates properly.
Step 12
Switch off the ignition.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the TOYOTA Prius III Hatchback (XW30) model