Disclaimer
How to change front anti roll bar links on TOYOTA Prius Plus (ZVW4) – replacement guide
downloads:
1
Views:
11
Important!
This replacement procedure can be used for:
TOYOTA Prius Plus (ZVW4) 1.8 Hybrid (ZVW40) … View more
The steps may slightly vary depending on the car design.
TOYOTA Prius Plus (ZVW4) 1.8 Hybrid (ZVW40) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for Prius Plus (ZVW4) and other TOYOTA models
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Drive socket # 17
HEX №H6 wrench
Wheel impact socket #21
Ratchet wrench
Torque wrench
Wheel chock
AUTODOC recommends:
- Replace the stabiliser links on TOYOTA Prius Plus (ZVW4) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – TOYOTA Prius Plus (ZVW4). Use the following procedure:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #21. - Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. TOYOTA Prius Plus (ZVW4) - Step 5
Remove the wheel. - Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use HEX No.H6. Use a drive socket #17. Use a ratchet wrench. - Step 8
Unscrew the fastener connecting the stabilizer link to the shock strut. Use HEX No.H6. Use a drive socket #17. Use a ratchet wrench. - Step 9
Remove the stabilizer rod.Replacement: anti roll bar links – TOYOTA Prius Plus (ZVW4). AUTODOC experts recommend:Examine stabiliser bushes. Replace them if needed. - Step 10Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.Step 11
Install a new rod, tighten the fasteners. Use HEX No.H6. Use a drive socket #17. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the TOYOTA Prius Plus (ZVW4) model
Popular maintenance tutorials for TOYOTA Prius Plus (ZVW4)
Complete guides for changing the Drop links on different TOYOTA PRIUS models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your TOYOTA Prius Plus (ZVW4)
View more
Preventing Engine Failure: Head Gasket Inspection Tutorial | AUTODOC
BMW E30 Turbo Suspension Swap: Boost Your Handling | AUTODOC project
DIY vehicle AC compressor restoration
Top 5 reasons why your car squeals | AUTODOC Tips
Most commonly replaced car parts on TOYOTA PRIUS
Time to replace parts? Get even better deals in our Shop app.

SCAN ME
























