Important!
This replacement procedure can be used for:
TOYOTA COROLLA (ZZE12_, NDE12_, ZDE12_) 1.8 VVTL-i TS (ZZE123_), TOYOTA COROLLA (ZZE12_, NDE12_, ZDE12_) 1.4 VVT-i (ZZE120_), TOYOTA COROLLA (ZZE12_, NDE12_, ZDE12_) 1.6 VVT-i (ZZE121_), TOYOTA COROLLA (ZZE12_, NDE12_, ZDE12_) 1.8 VVTL-i TS (ZZE123), TOYOTA COROLLA (ZZE12_, NDE12_, ZDE12_) 2.0 D-4D (CDE120_), TOYOTA COROLLA (ZZE12_, NDE12_, ZDE12_) 2.0 D-4D (CDE120R_, CDE120L_), TOYOTA COROLLA (ZZE12_, NDE12_, ZDE12_) 2.0 D-4D (CDE120R_, CDE120L_), TOYOTA COROLLA (ZZE12_, NDE12_, ZDE12_) 1.4 D (NDE120_), TOYOTA COROLLA (ZZE12_, NDE12_, ZDE12_) 1.8 VVTL-i TS (ZZE123_), TOYOTA COROLLA (ZZE12_, NDE12_, ZDE12_) 1.8 VVTi (ZZE122_), TOYOTA COROLLA (ZZE12_, NDE12_, ZDE12_) 1.8 4WD (ZZE124), TOYOTA COROLLA (ZZE12_, NDE12_, ZDE12_) 1.8 VVTL-i TS (ZZE123), TOYOTA COROLLA (ZZE12_, NDE12_, ZDE12_) 1.8 (ZZE122_), TOYOTA COROLLA (ZZE12_, NDE12_, ZDE12_) 1.5 RUNX VVT-i (NZE121_) View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Anti Roll Bar Links for COROLLA (ZZE12_, NDE12_, ZDE12_) and other TOYOTA models
Alternative products
How to change Anti-roll bar link on Toyota Corolla E120 1.6 VVT-i (ZZE121_) – step-by-step instructions for straightforward car repair Anti-roll bar link
Tools
Replacement: anti roll bar links – TOYOTA COROLLA (ZZE12_, NDE12_, ZDE12_). Tools you'll need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #17
Combination spanner #19
Drive socket # 17
Drive socket # 19
HEX bit no.H6
Wheel impact socket #21
Ratchet wrench
Torque wrench
Crow bar
Wheel chock
AUTODOC recommends:
  • Replace the stabiliser links on TOYOTA COROLLA (ZZE12_, NDE12_, ZDE12_) in pairs.
  • The replacement procedure is identical for both stabiliser links on the same axle.
  • All work should be done with the engine stopped.
Replacement: anti roll bar links – TOYOTA COROLLA (ZZE12_, NDE12_, ZDE12_). Recommended sequence of steps:
  1. Step 1
    How to change Anti Roll Bar Links on Toyota Corolla E120 2001 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace TOYOTA COROLLA (ZZE12_, NDE12_, ZDE12_) 1.6 VVT-i (ZZE121_) 2002 Anti Roll Bar Links - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #21.
  3. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    Toyota Corolla E120 1.4 VVT-i (ZZE120_) 2003 Anti Roll Bar Links replacement: free workshop manuals
    Unscrew the wheel bolts.
    Replacement: anti roll bar links – TOYOTA COROLLA (ZZE12_, NDE12_, ZDE12_). Tip from AUTODOC experts:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  4. Step 5
    Changing Anti Roll Bar Links on TOYOTA COROLLA (ZZE12_, NDE12_, ZDE12_) 2.0 D-4D (CDE120R_, CDE120L_) 2004 by yourself
    Remove the wheel.
  5. Step 6
    How to remove TOYOTA COROLLA 1.8 VVTL-i TS (ZZE123) 2005 Anti Roll Bar Links - online easy-to-follow instructions
    Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Anti Roll Bar Links on TOYOTA COROLLA (ZZE12_, NDE12_, ZDE12_) 2006: download PDF manuals and video instructions
    Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use HEX No.H6. Use a combination spanner #17.
  7. Step 8
    How hard is it to do yourself: Anti Roll Bar Links replacement on Toyota Corolla E120 1.8 VVTL-i TS (ZZE123_) 2007 - download illustrated guide
    Unscrew the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #17. Use a drive socket #17. Use a ratchet wrench.
  8. Step 9
    Need to know how to renew Anti Roll Bar Links on TOYOTA COROLLA 2001? This free workshop manual will help you to do it yourself
    Remove the stabilizer rod. Use a crowbar.
    Replacement: anti roll bar links – TOYOTA COROLLA (ZZE12_, NDE12_, ZDE12_). Tip from AUTODOC experts:
    Examine stabiliser bushes. Replace them if needed.
  9. Step 10
    Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
    Step 11
    Changing of Anti Roll Bar Links on Toyota Corolla E120 2002 won't be an issue if you follow this illustrated step-by-step guide
    Install a new rod, tighten the fasteners. Use a combination spanner #19. Use a drive socket #19. Use HEX No.H6. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the TOYOTA Corolla IX Hatchback (E120) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY TOYOTA COROLLA (ZZE12_, NDE12_, ZDE12_) Anti Roll Bar Links replacement - online guide
Tips & tricks for your TOYOTA COROLLA (ZZE12_, NDE12_, ZDE12_)
View more
  • How to change Drop links on TOYOTA COROLLA (ZZE12_, NDE12_, ZDE12_) 1.4 D (NDE120_) - replacement tricks
    How to Fix P0401 ✅ error code Insufficient EGR flow
  • Changing Stabilizer link Toyota Corolla E120 1.6 VVT-i (ZZE121_) - Replacement Tips
    Top 5 mistakes when replacing spark plugs | AUTODOC tips
  • Maintenance Hacks - TOYOTA COROLLA (ZZE12_, NDE12_, ZDE12_) 1.4 VVT-i (ZZE120_) Sway bar link replacement guide
    How to get your motorcycle ready for spring
  • Replace Drop link on Toyota Corolla E120 - free video tips
    5 mistakes when replacing consumables
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
TOYOTA COROLLA (ZZE12_, NDE12_, ZDE12_) Anti Roll Bar Links replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME