Disclaimer
How to change front anti roll bar links on RENAULT Clio II Van – replacement guide
downloads:
5
Views:
62
Important!
This replacement procedure can be used for:
RENAULT CLIO II Box (SB0/1/2_) 1.9 D (SB0E), RENAULT CLIO II Box (SB0/1/2_) 1.2 (SB0A, SB0F, SB1K, SB2D), RENAULT CLIO II Box (SB0/1/2_) 1.5 dCi (SB07), RENAULT CLIO II Box (SB0/1/2_) 1.6 (SB0H), RENAULT CLIO II Box (SB0/1/2_) 1.5 dCi, RENAULT CLIO II Box (SB0/1/2_) 1.5 dCi, RENAULT CLIO II Box (SB0/1/2_) 1.9 DTi (SB0U), RENAULT CLIO II Box (SB0/1/2_) 1.5 dCi, RENAULT CLIO II Box (SB0/1/2_) 1.9 D (SB0R), RENAULT CLIO II Box (SB0/1/2_) 1.9 D (SB0J), RENAULT CLIO II Box (SB0/1/2_) 1.2 (SB0A, SB0F, SB10) … View more
The steps may slightly vary depending on the car design.
RENAULT CLIO II Box (SB0/1/2_) 1.9 D (SB0E), RENAULT CLIO II Box (SB0/1/2_) 1.2 (SB0A, SB0F, SB1K, SB2D), RENAULT CLIO II Box (SB0/1/2_) 1.5 dCi (SB07), RENAULT CLIO II Box (SB0/1/2_) 1.6 (SB0H), RENAULT CLIO II Box (SB0/1/2_) 1.5 dCi, RENAULT CLIO II Box (SB0/1/2_) 1.5 dCi, RENAULT CLIO II Box (SB0/1/2_) 1.9 DTi (SB0U), RENAULT CLIO II Box (SB0/1/2_) 1.5 dCi, RENAULT CLIO II Box (SB0/1/2_) 1.9 D (SB0R), RENAULT CLIO II Box (SB0/1/2_) 1.9 D (SB0J), RENAULT CLIO II Box (SB0/1/2_) 1.2 (SB0A, SB0F, SB10) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for CLIO II Box (SB0/1/2_) and other RENAULT models
Alternative products

Wire brush
WD-40 spray
Copper grease
Drive socket # 13
Torx bit T45
Wheel impact socket #19
Ratchet wrench
Torque wrench
Hydraulic transmission jack
Wheel chock
AUTODOC recommends:
- Replace the stabiliser links on RENAULT CLIO II Box (SB0/1/2_) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – RENAULT CLIO II Box (SB0/1/2_). Use the following procedure:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #19. - Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.Replacement: anti roll bar links – RENAULT CLIO II Box (SB0/1/2_). Tip from AUTODOC experts:To avoid injury, hold up the wheel when unscrewing the bolts. - Step 5
Remove the wheel. - Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the stabilizer rod fasteners. Use a drive socket #13. Use a ratchet wrench. - Step 8
Remove the stabilizer rod.Replacement: anti roll bar links – RENAULT CLIO II Box (SB0/1/2_). Tip from AUTODOC:Examine stabiliser bushes. Replace them if needed. - Step 9
Clean all joints of the stabiliser link. Use a wire brush. Treat all joints of the stabiliser link. Use WD-40 spray. - Step 10
Install a new rod, tighten the fasteners.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the RENAULT Clio II Van model
Popular maintenance tutorials for Renault Clio 2 Van
Complete guides for changing the Drop links on different RENAULT CLIO models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your RENAULT CLIO II Box (SB0/1/2_)
View more
TOP 6 WD-40 lifehacks | AUTODOC tips
DIY car soundproofing | AUTODOC tips
Engine Overheating? Replace Your Cooling Fan to Fix It
Extend your engine's life: Avoid these 3 damaging factors | AUTODOC tips
Most commonly replaced car parts on RENAULT CLIO
Time to replace parts? Get even better deals in our Shop app.

SCAN ME



























