Important!
This replacement procedure can be used for:
RENAULT CLIO II Box (SB0/1/2_) 1.2 (SB0A, SB0F, SB10), RENAULT CLIO II Box (SB0/1/2_) 1.9 D (SB0J), RENAULT CLIO II Box (SB0/1/2_) 1.5 dCi, RENAULT CLIO II Box (SB0/1/2_) 1.9 DTi (SB0U), RENAULT CLIO II Box (SB0/1/2_) 1.5 dCi, RENAULT CLIO II Box (SB0/1/2_) 1.5 dCi (SB07), RENAULT CLIO II Box (SB0/1/2_) 1.2 (SB0A, SB0F, SB1K, SB2D), RENAULT CLIO II Box (SB0/1/2_) 1.9 D (SB0E) View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Wheel Bearing for CLIO II Box (SB0/1/2_) and other RENAULT models
Tools
Replacement: wheel bearing – RENAULT CLIO II Box (SB0/1/2_). Tools you'll need:
WD-40 spray
All-purpose cleaning spray
Multipurpose grease
Copper grease
Torque wrench
Drive socket # 30
Wheel impact socket #17
Tap wrench
Hammer
Rubber mallet
Bush and bearing driver set
Circlip pliers
Crow bar
Wheel chock
Replacement: wheel bearing – RENAULT CLIO II Box (SB0/1/2_). AUTODOC experts recommend:
  • Do not re-use the bearing assembly of your RENAULT CLIO II Box (SB0/1/2_) car.
  • The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
  • All work should be done with the engine stopped.
Replacement: wheel bearing – RENAULT CLIO II Box (SB0/1/2_). Use the following procedure:
  1. Step 1
    Secure the wheels with chocks.
    Step 2
    How to change Wheel Bearing on Renault Clio 2 Van 1998 - free PDF and video manuals
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  2. Step 3
    Raise the rear of the car and secure on supports.
    Step 4
    How to replace RENAULT CLIO II Box (SB0/1/2_) 1.5 dCi 1999 Wheel Bearing - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    Replacement: wheel bearing – RENAULT CLIO II Box (SB0/1/2_). Professionals recommend:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  3. Step 5
    Renault Clio 2 Van 1.9 D 2000 Wheel Bearing replacement: free workshop manuals
    Remove the wheel.
  4. Step 6
    Changing Wheel Bearing on RENAULT CLIO II Box (SB0/1/2_) 1.2 (SB0A, SB0F, SB1K, SB2D) 2001 by yourself
    Remove the hub bearing protection cap. Use a hammer. Use a crowbar.
    Replacement: wheel bearing – RENAULT CLIO II Box (SB0/1/2_). Tip:
    Some cars are not equipped with wheel hub caps.
  5. Step 7
    Clean the wheel hub fastener. Use WD-40 spray.
    Step 8
    How to remove RENAULT CLIO 1.9 DTi 2002 Wheel Bearing - online easy-to-follow instructions
    Unscrew the wheel hub axle nut. Use a drive socket #30. Use a tap wrench.
  6. Step 9
    How to replace Wheel Bearing on RENAULT CLIO II Box (SB0/1/2_) 2003: download PDF manuals and video instructions
    Remove the brake drum assembled with the wheel hub bearing.
    Replacement: wheel bearing – RENAULT CLIO II Box (SB0/1/2_). AUTODOC experts recommend:
    Examine the brake drum. Replace it if necessary.
  7. Step 10
    How hard is it to do yourself: Wheel Bearing replacement on Renault Clio 2 Van 1.9 D 2004 - download illustrated guide
    Clean the fasteners of the wheel hub bearing.
  8. Step 11
    Need to know how to renew Wheel Bearing on RENAULT CLIO 2005? This free workshop manual will help you to do it yourself
    Remove the wheel hub bearing retaining ring. Use circlip pliers.
  9. Step 12
    Changing of Wheel Bearing on Renault Clio 2 Van 2006 won't be an issue if you follow this illustrated step-by-step guide
    Press out the wheel hub bearing. Use a bush and bearing driver set.
  10. Step 13
    RENAULT CLIO 1.2 (SB0A, SB0F, SB1K, SB2D) Wheel Bearing replacement: online guides and video tutorials
    Clean the hub bearing mounting seat. Use WD-40 spray.
  11. Step 14
    Replacing Wheel Bearing on Renault Clio 2 Van 2008 1.5 dCi by yourself
    Press fit the new wheel hub bearing into the brake drum. Use a bush and bearing driver set.
    Replacement: wheel bearing – RENAULT CLIO II Box (SB0/1/2_). Tip from AUTODOC experts:
    Check to make sure the wheel hub bearing is positioned correctly. Avoid its misalignment. Stop pressing on the surface of the bearing immediately after it has been fitted into its mounting seat.
  12. Step 15
    CLIO II Box (SB0/1/2_) 1.9 DTi 2009 Wheel Bearing DIY replacement workshop manual
    Install the wheel hub bearing retaining ring. Use circlip pliers.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the RENAULT Clio II Van model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
RENAULT CLIO II Box (SB0/1/2_) Wheel Bearing replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY RENAULT CLIO II Box (SB0/1/2_) Wheel Bearing replacement - online guide
Tips & tricks for your RENAULT CLIO II Box (SB0/1/2_)
View more
  • How to change Wheel bearings on RENAULT CLIO II Box (SB0/1/2_) 1.2 - replacement tricks
    What to check when buying a used car | AUTODOC tips
  • Changing Hub bearing Renault Clio 2 Van 1.5 dCi - Replacement Tips
    TOP 6 WD-40 lifehacks | AUTODOC tips
  • Maintenance Hacks - RENAULT CLIO II Box (SB0/1/2_) 1.9 D Wheel bearing kit replacement guide
    The most common problems when buying a used car | AUTODOC
  • Replace Wheel hub bearing on Renault Clio 2 Van - free video tips
    5 most common causes of oil leaks | AUTODOC tips