Disclaimer
How to change front anti roll bar links on RENAULT Clio IV Grandtour (KH_) – replacement guide
downloads:
0
Views:
24
Important!
This replacement procedure can be used for:
RENAULT Clio IV Grandtour (KH_) 0.9 TCe, RENAULT Clio IV Grandtour (KH_) 1.2 16V, RENAULT Clio IV Grandtour (KH_) 1.5 dCi, RENAULT Clio IV Grandtour (KH_) 1.5 dCi (KHN3, KHN4), RENAULT Clio IV Grandtour (KH_) 1.2 TCe (KHM0), RENAULT Clio IV Grandtour (KH_) 1.2 TCe (KHAU), RENAULT Clio IV Grandtour (KH_) 1.5 dCi, RENAULT Clio IV Grandtour (KH_) 0.9 TCe (KHNP) … View more
The steps may slightly vary depending on the car design.
RENAULT Clio IV Grandtour (KH_) 0.9 TCe, RENAULT Clio IV Grandtour (KH_) 1.2 16V, RENAULT Clio IV Grandtour (KH_) 1.5 dCi, RENAULT Clio IV Grandtour (KH_) 1.5 dCi (KHN3, KHN4), RENAULT Clio IV Grandtour (KH_) 1.2 TCe (KHM0), RENAULT Clio IV Grandtour (KH_) 1.2 TCe (KHAU), RENAULT Clio IV Grandtour (KH_) 1.5 dCi, RENAULT Clio IV Grandtour (KH_) 0.9 TCe (KHNP) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for Clio IV Grandtour (KH_) and other RENAULT models
Alternative products

Wire brush
WD-40 spray
All-purpose cleaning spray
Ceramic grease
Torque wrench
Combination spanner #17
Drive socket # 17
HEX bit no.H5.
Wheel impact socket #17
Ratchet wrench
Tap wrench
Wheel chock
AUTODOC recommends:
- Replace the stabiliser links on RENAULT CLIO Grandtour IV in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – RENAULT CLIO Grandtour IV. Take the following steps:
- Step 1Secure the wheels with chocks.Step 2
Loosen the wheel bolts. Use wheel impact socket #17. Use a tap wrench. - Step 3Raise the car.Replacement: anti roll bar links – RENAULT CLIO Grandtour IV. AUTODOC recommends:If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.Step 4
Unscrew the wheel bolts.AUTODOC recommends:To avoid injury, hold up the wheel when unscrewing the bolts. - Step 5
Remove the wheel. - Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #17. Use HEX No.H5. Use a ratchet wrench. - Step 8
Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #17. Use HEX No.H5. Use a ratchet wrench. - Step 9
Remove the stabiliser link. - Step 10
Clean the mounting seats of the stabiliser link. Use a wire brush. Use all-purpose cleaning spray. - Step 11
Install a new stabiliser link and tighten the fasteners.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the RENAULT Clio IV Grandtour (KH) model
Popular maintenance tutorials for Renault Clio 4 Grandtour
Complete guides for changing the Drop links on different RENAULT CLIO models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your RENAULT Clio IV Grandtour (KH_)
View more
The Fast and Easy Way to Fix a Broken Wheel Stud | AUTODOC tips
7 signs of faulty fuel injectors | AUTODOC tips
Top 7 signs of a bad starter
#DIY guide: Changing your car's color with a spray can | AUTODOC tips
Most commonly replaced car parts on RENAULT CLIO
Time to replace parts? Get even better deals in our Shop app.

SCAN ME




























