Important!
This replacement procedure can be used for:
PEUGEOT 308 I Hatchback (4A_, 4C_) 1.6 BioFlex, PEUGEOT 308 I Hatchback (4A_, 4C_) 1.4 16V, PEUGEOT 308 I Hatchback (4A_, 4C_) 1.6 16V, PEUGEOT 308 I Hatchback (4A_, 4C_) 1.6 16V, PEUGEOT 308 I Hatchback (4A_, 4C_) 1.6 HDi, PEUGEOT 308 I Hatchback (4A_, 4C_) 1.6 HDi, PEUGEOT 308 I Hatchback (4A_, 4C_) 2.0 HDi, PEUGEOT 308 I Hatchback (4A_, 4C_) 1.6 16V, PEUGEOT 308 I Hatchback (4A_, 4C_) 1.6 16V, PEUGEOT 308 I Hatchback (4A_, 4C_) 1.4 16V, PEUGEOT 308 I Hatchback (4A_, 4C_) 1.6 THP 16V, PEUGEOT 308 I Hatchback (4A_, 4C_) 1.6 HDi, PEUGEOT 308 I Hatchback (4A_, 4C_) 1.6 HDi, PEUGEOT 308 I Hatchback (4A_, 4C_) 1.6 GTi, PEUGEOT 308 I Hatchback (4A_, 4C_) 2.0 HDi, PEUGEOT 308 I Hatchback (4A_, 4C_) 1.6, PEUGEOT 308 I Hatchback (4A_, 4C_) 2.0 HDi, PEUGEOT 308 I Hatchback (4A_, 4C_) 2.0 HDi, PEUGEOT 308 I Hatchback (4A_, 4C_) 1.6 HDi, PEUGEOT 308 I Hatchback (4A_, 4C_) 2.0 Bioflex View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Anti Roll Bar Links for 308 I Hatchback (4A_, 4C_) and other PEUGEOT models
Tools
Replacement: anti roll bar links – PEUGEOT 308 (4A_, 4C_). Tools you need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #16
Drive socket # 15
Drive socket # 17
Wheel impact socket #17
Ratchet wrench
Wheel chock
Replacement: anti roll bar links – PEUGEOT 308 (4A_, 4C_). AUTODOC experts recommend:
  • Replace the stabiliser links on PEUGEOT 308 (4A_, 4C_) in pairs.
  • The replacement procedure is identical for both stabiliser links on the same axle.
  • All work should be done with the engine stopped.
Replacement: anti roll bar links – PEUGEOT 308 (4A_, 4C_). Recommended sequence of steps:
  1. Step 1
    Secure the wheels with chocks.
    Step 2
    How to change Anti Roll Bar Links on Peugeot 308 Mk1 2007 - free PDF and video manuals
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  2. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    How to replace PEUGEOT 308 I Hatchback (4A_, 4C_) 1.6 HDi 2008 Anti Roll Bar Links - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    Replacement: anti roll bar links – PEUGEOT 308 (4A_, 4C_). AUTODOC recommends:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  3. Step 5
    Peugeot 308 Mk1 1.6 16V 2009 Anti Roll Bar Links replacement: free workshop manuals
    Remove the wheel.
  4. Step 6
    Changing Anti Roll Bar Links on PEUGEOT 308 I Hatchback (4A_, 4C_) 1.4 16V 2010 by yourself
    Remove the ABS wiring harness bracket.
  5. Step 7
    How to remove PEUGEOT 308 1.6 HDi 2011 Anti Roll Bar Links - online easy-to-follow instructions
    Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
  6. Step 8
    How to replace Anti Roll Bar Links on PEUGEOT 308 I Hatchback (4A_, 4C_) 2012: download PDF manuals and video instructions
    Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #15. Use a ratchet wrench.
  7. Step 9
    How hard is it to do yourself: Anti Roll Bar Links replacement on Peugeot 308 Mk1 2.0 HDi 2013 - download illustrated guide
    Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
  8. Step 10
    Need to know how to renew Anti Roll Bar Links on PEUGEOT 308 2014? This free workshop manual will help you to do it yourself
    Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #16. Use a drive socket #15. Use a ratchet wrench.
  9. Step 11
    Changing of Anti Roll Bar Links on Peugeot 308 Mk1 2015 won't be an issue if you follow this illustrated step-by-step guide
    Remove the stabilizer rod.
    Replacement: anti roll bar links – PEUGEOT 308 (4A_, 4C_). Tip from AUTODOC experts:
    Examine stabiliser bushes. Replace them if needed.
  10. Step 12
    PEUGEOT 308 1.6 HDi Anti Roll Bar Links replacement: online guides and video tutorials
    Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
  11. Step 13
    Replacing Anti Roll Bar Links on Peugeot 308 Mk1 2007 1.6 HDi by yourself
    Install a new rod, tighten the fasteners.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the PEUGEOT 308 I Hatchback (4A, 4C) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
PEUGEOT 308 I Hatchback (4A_, 4C_) Anti Roll Bar Links replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY PEUGEOT 308 I Hatchback (4A_, 4C_) Anti Roll Bar Links replacement - online guide
Tips & tricks for your PEUGEOT 308 I Hatchback (4A_, 4C_)
View more
  • How to change Drop links on PEUGEOT 308 I Hatchback (4A_, 4C_) 2.0 HDi - replacement tricks
    Things you should never do with an automatic transmission | AUTODOC tips
  • Changing Stabilizer link Peugeot 308 Mk1 1.6 HDi - Replacement Tips
    How to remove rust | AUTODOC tips
  • Maintenance Hacks - PEUGEOT 308 I Hatchback (4A_, 4C_) 1.6 16V Sway bar link replacement guide
    How to restore a steering wheel | AUTODOC tips
  • Replace Drop link on Peugeot 308 Mk1 - free video tips
    4 reasons why your CHECK ENGINE light is on | AUTODOC tips