How to carry out replacement: Anti Roll Bar Links 2.0 HDi Peugeot 308 CC
Disclaimer
Change Peugeot 308 CC 2.0 HDi Anti Roll Bar Links yourself – manuals and video tutorials

How to change front anti roll bar links on PEUGEOT 308 I CC (4B) – replacement guide

downloads: 4
Views: 34
Download your free tutorial and fix PEUGEOT 308 CC (4B_) 1.6 THP problems yourself Download for free 1.34 MB Anti Roll Bar Links for Peugeot 308 CC Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
PEUGEOT 308 CC (4B_) 1.6 THP, PEUGEOT 308 CC (4B_) 1.6 16V, PEUGEOT 308 CC (4B_) 2.0 HDi, PEUGEOT 308 CC (4B_) 1.6 16V, PEUGEOT 308 CC (4B_) 1.6 HDi, PEUGEOT 308 CC (4B_) 1.6 16V, PEUGEOT 308 CC (4B_) 1.6 16V, PEUGEOT 308 CC (4B_) 2.0 HDi, PEUGEOT 308 CC (4B_) 2.0 HDi, PEUGEOT 308 CC (4B_) 1.6 HDi, PEUGEOT 308 CC (4B_) 2.0 CVVT, PEUGEOT 308 CC (4B_) 1.6 HDi … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Anti Roll Bar Links for 308 CC (4B_) and other PEUGEOT models
Alternative products
How to change Anti-roll bar link on Peugeot 308 CC 2.0 HDi – step-by-step instructions for straightforward car repair Anti-roll bar link
Tools
Replacement: anti roll bar links – PEUGEOT 308 CC. Tools you need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #16
Drive socket # 15
Drive socket # 17
Wheel impact socket #17
Ratchet wrench
Wheel chock
Buy tools
Replacement: anti roll bar links – PEUGEOT 308 CC. AUTODOC experts recommend:
  • Replace the stabiliser links on PEUGEOT 308 CC in pairs.
  • The replacement procedure is identical for both stabiliser links on the same axle.
  • All work should be done with the engine stopped.
Replacement: anti roll bar links – PEUGEOT 308 CC. Recommended sequence of steps:
  1. Step 1
    Secure the wheels with chocks.
    Step 2
    How to change Anti Roll Bar Links on Peugeot 308 CC 2009 - free PDF and video manuals
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  2. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    How to replace PEUGEOT 308 CC (4B_) 2.0 HDi 2010 Anti Roll Bar Links - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    Replacement: anti roll bar links – PEUGEOT 308 CC. AUTODOC recommends:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  3. Step 5
    Peugeot 308 CC 1.6 HDi 2011 Anti Roll Bar Links replacement: free workshop manuals
    Remove the wheel.
  4. Step 6
    Changing Anti Roll Bar Links on PEUGEOT 308 CC (4B_) 1.6 THP 2012 by yourself
    Remove the ABS wiring harness bracket.
  5. Step 7
    How to remove PEUGEOT 308 2.0 HDi 2013 Anti Roll Bar Links - online easy-to-follow instructions
    Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
  6. Step 8
    How to replace Anti Roll Bar Links on PEUGEOT 308 CC (4B_) 2014: download PDF manuals and video instructions
    Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #15. Use a ratchet wrench.
  7. Step 9
    How hard is it to do yourself: Anti Roll Bar Links replacement on Peugeot 308 CC 1.6 16V 2015 - download illustrated guide
    Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
  8. Step 10
    Need to know how to renew Anti Roll Bar Links on PEUGEOT 308 2009? This free workshop manual will help you to do it yourself
    Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #16. Use a drive socket #15. Use a ratchet wrench.
  9. Step 11
    Changing of Anti Roll Bar Links on Peugeot 308 CC 2010 won't be an issue if you follow this illustrated step-by-step guide
    Remove the stabilizer rod.
    Replacement: anti roll bar links – PEUGEOT 308 CC. Tip from AUTODOC experts:
    Examine stabiliser bushes. Replace them if needed.
  10. Step 12
    PEUGEOT 308 2.0 HDi Anti Roll Bar Links replacement: online guides and video tutorials
    Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
  11. Step 13
    Replacing Anti Roll Bar Links on Peugeot 308 CC 2012 2.0 HDi by yourself
    Install a new rod, tighten the fasteners.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the PEUGEOT 308 I CC (4B) model

Peugeot 308 CC tyre size

Popular maintenance tutorials for Peugeot 308 CC

More manuals for Peugeot 308 CC

Complete guides for changing the Drop links on different PEUGEOT 308 models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY PEUGEOT 308 CC (4B_) Anti Roll Bar Links replacement - online guide
Tips & tricks for your PEUGEOT 308 CC (4B_)
View more
  • How to change Drop links on PEUGEOT 308 CC (4B_) 1.6 16V - replacement tricks
    How to remove rust | AUTODOC tips
    27K views
    Published on: 16/09/2021
  • Changing Stabilizer link Peugeot 308 CC 2.0 HDi - Replacement Tips
    BMW E30 Turbo Suspension Swap: Boost Your Handling | AUTODOC project
    2K views
    Published on: 04/03/2021
  • Maintenance Hacks - PEUGEOT 308 CC (4B_) 1.6 HDi Sway bar link replacement guide
    Prevent Engine Damage: How to Identify Rocker Cover Gasket Issues and Proper Replacement | AUTODOC
    5K views
    Published on: 03/12/2020
  • Replace Drop link on Peugeot 308 CC - free video tips
    Revive Your Tyres: Expert Tips for a Lasting Shine | AUTODOC Guide
    4K views
    Published on: 07/04/2022

Most commonly replaced car parts on PEUGEOT 308

Professional manuals for the most common PEUGEOT models

Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
PEUGEOT 308 CC (4B_) Anti Roll Bar Links replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME