
Disclaimer
How to change front anti roll bar links on PEUGEOT 308 II SW Box Body / Estate (LC_) – replacement guide
downloads:
1
Views:
8
Important!
This replacement procedure can be used for:
PEUGEOT 308 II SW Box Body / Estate (LC_) 1.6 BlueHDi … View more
The steps may slightly vary depending on the car design.
PEUGEOT 308 II SW Box Body / Estate (LC_) 1.6 BlueHDi … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for 308 II SW Box Body / Estate (LC_) and other PEUGEOT models
Anti-roll bar link
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #16
Drive socket # 15
Drive socket # 17
Wheel impact socket #17
Ratchet wrench
Wheel chock
Replacement: anti roll bar links – PEUGEOT 308 II SW Van / Stationcar (LC_). AUTODOC experts recommend:
- Replace the stabiliser links on PEUGEOT 308 II SW Van / Stationcar (LC_) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – PEUGEOT 308 II SW Van / Stationcar (LC_). Recommended sequence of steps:
- Step 1Secure the wheels with chocks.Step 2Loosen the wheel mounting bolts. Use wheel impact socket #17.
- Step 3Raise the front of the car and secure on supports.Step 4Unscrew the wheel bolts.Replacement: anti roll bar links – PEUGEOT 308 II SW Van / Stationcar (LC_). AUTODOC recommends:To avoid injury, hold up the wheel when unscrewing the bolts.
- Step 5Remove the wheel.
- Step 6Remove the ABS wiring harness bracket.
- Step 7Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
- Step 8Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #15. Use a ratchet wrench.
- Step 9Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
- Step 10Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #16. Use a drive socket #15. Use a ratchet wrench.
- Step 11Remove the stabilizer rod.Replacement: anti roll bar links – PEUGEOT 308 II SW Van / Stationcar (LC_). Tip from AUTODOC experts:Examine stabiliser bushes. Replace them if needed.
- Step 12Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
- Step 13Install a new rod, tighten the fasteners.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the PEUGEOT 308 II SW Box Body / Estate (LC_) model
Popular maintenance tutorials for PEUGEOT 308 II SW Van / Stationcar (LC_)
Complete guides for changing the Drop links on different PEUGEOT 308 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your PEUGEOT 308 II SW Box Body / Estate (LC_)
View more
- DIY starter repair | AUTODOC tips
- BMW E30 Turbo Suspension Swap: Boost Your Handling | AUTODOC project
- How to make an injector test bench yourself
- How to Polish Your Car Yourself and Save Money on Garage Services | AUTODOC tips
Most commonly replaced car parts on PEUGEOT 308
Time to replace parts? Get even better deals in our Shop app.

SCAN ME