
Disclaimer
How to change front anti roll bar links on OPEL Meriva B (S10) – replacement guide
downloads:
15
Views:
109
Important!
This replacement procedure can be used for:
OPEL Meriva B (S10) 1.4 LPG (75), OPEL Meriva B (S10) 1.4 (75), OPEL Meriva B (S10) 1.4 (75), OPEL Meriva B (S10) 1.7 CDTI (75), OPEL Meriva B (S10) 1.3 CDTI (75), OPEL Meriva B (S10) 1.3 CDTI (75), OPEL Meriva B (S10) 1.7 CDTI (75), OPEL Meriva B (S10) 1.7 CDTI (75), OPEL Meriva B (S10) 1.6 CDTI (75), OPEL Meriva B (S10) 1.6 CDTi (75) … View more
The steps may slightly vary depending on the car design.
OPEL Meriva B (S10) 1.4 LPG (75), OPEL Meriva B (S10) 1.4 (75), OPEL Meriva B (S10) 1.4 (75), OPEL Meriva B (S10) 1.7 CDTI (75), OPEL Meriva B (S10) 1.3 CDTI (75), OPEL Meriva B (S10) 1.3 CDTI (75), OPEL Meriva B (S10) 1.7 CDTI (75), OPEL Meriva B (S10) 1.7 CDTI (75), OPEL Meriva B (S10) 1.6 CDTI (75), OPEL Meriva B (S10) 1.6 CDTi (75) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for Meriva B (S10) and other OPEL models
Anti-roll bar link
Alternative products

Wire brush
WD-40 spray
Copper grease
Drive socket # 18
Combination spanner #19
Wheel impact socket #17
Torque wrench
Wheel chock
AUTODOC recommends:
- Replace the stabiliser links on OPEL MERIVA B in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – OPEL MERIVA B. Recommended sequence of steps:
- Step 1Secure the wheels with chocks.
- Step 2Loosen the wheel mounting bolts. Use wheel impact socket #17.
- Step 3Raise the front of the car and secure on supports.Step 4Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. OPEL MERIVA B
- Step 5Remove the wheel.
- Step 6Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
- Step 7Unscrew the nut and remove the stabilizer rod from the shock strut. Use a combination spanner #19. Use a drive socket #18.
- Step 8Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.Step 9Unscrew the fasteners connecting the stabiliser link to the stabiliser bar. Use a combination spanner #19. Use a drive socket #18.
- Step 10Remove the stabilizer rod.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the OPEL Meriva B (S10) model
Popular maintenance tutorials for Opel Meriva B
Complete guides for changing the Drop links on different OPEL MERIVA models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your OPEL Meriva B (S10)
View more
- Save Money on Fuel with These Easy Tips | AUTODOC
- How to restore a steering wheel | AUTODOC tips
- TOP 5 mistakes when replacing shock absorbers | AUTODOC tips
- How to Install a New Windscreen Yourself | AUTODOC Expert Tips
Most commonly replaced car parts on OPEL MERIVA
Time to replace parts? Get even better deals in our Shop app.

SCAN ME