How to carry out replacement: Track Rod End dCi 85 Nissan Kubistar Van X80
Disclaimer
Change Nissan Kubistar Van X80 1.5 dCi Track Rod End yourself – manuals and video tutorials

How to change track rod end on NISSAN Kubistar Van (X76) – replacement guide

downloads: 0
Views: 2
Download your free tutorial and fix NISSAN Kubistar Van (X76) dCi 85 problems yourself Download for free 1.75 MB Track Rod End for Nissan Kubistar Van X80 Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
NISSAN Kubistar Van (X76) 1.5 dCi, NISSAN Kubistar Van (X76) 1.2, NISSAN Kubistar Van (X76) 1.2 16V, NISSAN Kubistar Van (X76) 1.6 16V, NISSAN Kubistar Van (X76) 1.5 dCi, NISSAN Kubistar Van (X76) 1.5 dCi, NISSAN Kubistar Van (X76) 1.5 dCi 70, NISSAN Kubistar Van (X76) dCi 85, NISSAN Kubistar Van (X76) 1.5 dCi, NISSAN Kubistar Van (X76) 1.4 … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Track Rod End for Kubistar Van (X76) and other NISSAN models
Alternative products
How to change Track rod end on Nissan Kubistar Van X80 dCi 85 – step-by-step instructions for straightforward car repair Track rod end
Tools
Replacement: track rod end – NISSAN KUBISTAR Box (X80). Tools you need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Torque wrench
Combination spanner #13
Combination spanner #21
Drive socket # 16
Drive socket # 17
Wheel impact socket #17
Ratchet wrench
Tap wrench
Ball joint puller
Vernier caliper
Wheel chock
Buy tools
Replacement: track rod end – NISSAN KUBISTAR Box (X80). Professionals recommend:
  • Replace tie rod ends in pairs.
  • The replacement procedure is identical for the right and left tie rod ends.
  • All work should be done with the engine stopped.
Replacement: track rod end – NISSAN KUBISTAR Box (X80). Use the following procedure:
  1. Step 1
    How to change Track Rod End on Nissan Kubistar Van X80 2003 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace NISSAN Kubistar Van (X76) dCi 85 2004 Track Rod End - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    Nissan Kubistar Van X80 1.5 dCi 2005 Track Rod End replacement: free workshop manuals
    Unscrew the wheel bolts.
    Replacement: track rod end – NISSAN KUBISTAR Box (X80). Tip:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  4. Step 5
    Changing Track Rod End on NISSAN Kubistar Van (X76) 1.6 16V 2006 by yourself
    Remove the wheel.
  5. Step 6
    How to remove NISSAN KUBISTAR 1.2 16V 2007 Track Rod End - online easy-to-follow instructions
    Clean the fastener connecting the tie rod end to the steering knuckle. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Track Rod End on NISSAN Kubistar Van (X76) 2008: download PDF manuals and video instructions
    Unscrew the end fastening nut to the steering knuckle. Use a drive socket #16. Use a tap wrench.
  7. Step 8
    How hard is it to do yourself: Track Rod End replacement on Nissan Kubistar Van X80 1.4 2009 - download illustrated guide
    When deinstalling, mark or measure the precise position of the ball joint on the track rod, or count the number of turns in order to prevent misalignment afterward. Use a vernier caliper.
  8. Step 9
    Need to know how to renew Track Rod End on NISSAN KUBISTAR 2010? This free workshop manual will help you to do it yourself
    Loosen the lock nut securing the tie rod end to the tie rod. Use a combination spanner #21 (2 pieces).
  9. Step 10
    Changing of Track Rod End on Nissan Kubistar Van X80 2011 won't be an issue if you follow this illustrated step-by-step guide
    Disconnect the tie rod end from the steering knuckle. Use a ball joint puller.
  10. Step 11
    NISSAN KUBISTAR 1.5 dCi Track Rod End replacement: online guides and video tutorials
    Screw the end out of the tie rod. Use a combination spanner #13.
  11. Step 12
    Replacing Track Rod End on Nissan Kubistar Van X80 2013 dCi 85 by yourself
    Clean the mounting seats of the tie rod end. Use a wire brush. Use WD-40 spray.
  12. Step 13
    Kubistar Van (X76) 1.2 16V 2014 Track Rod End DIY replacement workshop manual
    Screw on a new tie rod end.
    Replacement: track rod end – NISSAN KUBISTAR Box (X80). Tip from AUTODOC:
    While installing the steering rod end remember to make the same number of turns or to leave the same length of thread showing as per your measurements.
  13. Step 14
    How to change Track Rod End on NISSAN Kubistar Van (X76) 2015 - tips and tricks
    When deinstalling, mark or measure the precise position of the ball joint on the track rod, or count the number of turns in order to prevent misalignment afterward. Use a vernier caliper.
  14. Step 15
    Step-by-step recommendations for DIY replacement Nissan Kubistar Van X80 2016 1.2 16V Track Rod End
    Connect the tie rod end to the steering knuckle.
  15. Step 16
    DIY replacement of Track Rod End on NISSAN Kubistar Van (X76) 1.5 dCi 70 2017 is not an issue anymore with our step-by-step tutorial
    Screw on the fastening nut that connects the tie rod end to the steering knuckle. Use a drive socket #17. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the NISSAN Kubistar Van (X76) model

Nissan Kubistar Van X80 tyre size

Popular maintenance tutorials for Nissan Kubistar Van X80

More manuals for Nissan Kubistar Van X80

Complete guides for changing the Tie rod end on different NISSAN KUBISTAR models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY NISSAN Kubistar Van (X76) Track Rod End replacement - online guide
Tips & tricks for your NISSAN Kubistar Van (X76)
View more
  • How to change Tie rod end on NISSAN Kubistar Van (X76) 1.5 dCi 70 - replacement tricks
    Top 7 signs of a bad starter
    5K views
    Published on: 20/03/2025
  • Changing Outer tie rod Nissan Kubistar Van X80 dCi 85 - Replacement Tips
    Top 5 reasons why your car squeals | AUTODOC Tips
    10K views
    Published on: 26/10/2023
  • Maintenance Hacks - NISSAN Kubistar Van (X76) 1.5 dCi Track rod end ball joint replacement guide
    Reviving Your Car: How to Start After Extended Idle Time | AUTODOC Tips
    7K views
    Published on: 20/05/2021
  • Replace Outer tie rod end on Nissan Kubistar Van X80 - free video tips
    Checking the starter without removing it | AUTODOC tips
    28K views
    Published on: 01/12/2020

Most commonly replaced car parts on NISSAN KUBISTAR

Professional manuals for the most common NISSAN models

ОЕ number
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
NISSAN Kubistar Van (X76) Track Rod End replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME