Disclaimer
How to change serpentine belt on NISSAN Kubistar Van (X76) – replacement guide
downloads:
4
Views:
73
Recommended replacement interval for the part category Serpentine belt : 2 year / 30000 km
Important!
This replacement procedure can be used for:
NISSAN Kubistar Van (X76) 1.5 dCi 70, NISSAN Kubistar Van (X76) 1.5 dCi, NISSAN Kubistar Van (X76) 1.5 dCi … View more
The steps may slightly vary depending on the car design.
NISSAN Kubistar Van (X76) 1.5 dCi 70, NISSAN Kubistar Van (X76) 1.5 dCi, NISSAN Kubistar Van (X76) 1.5 dCi … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Poly V-Belt for Kubistar Van (X76) and other NISSAN models
Alternative products

Torque wrench
Combination spanner #10
Combination spanner #16
Drive socket # 13
Wheel impact socket #17
Ratchet wrench
Clip removal tool
Fender cover
Wheel chock
Replacement: serpentine belt – NISSAN KUBISTAR Box (X80). AUTODOC recommends:
- All work should be done with the engine stopped.
Replacement: serpentine belt – NISSAN KUBISTAR Box (X80). Use the following procedure:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Secure the wheels with chocks. - Step 4
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 5Raise the front of the car and secure on supports.Step 6
Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. NISSAN KUBISTAR Box (X80) - Step 7
Remove the wheel. - Step 8
Remove the wheel arch cover. Use a clip removal tool. - Step 9
Unscrew the fuel filter bracket fixing bolts. Use a drive socket #13. Use a ratchet wrench. - Step 10
Remove the fuel filter fastening bracket. - Step 11
Unscrew the fuel filter bracket fixing bolts. Use a combination spanner #10. - Step 12
Remove the fuel filter fastening bracket. - Step 13
Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16. - Step 14
Remove the V-ribbed belt. - Step 15Return the tensioner pulley to its initial position.Replacement: serpentine belt – NISSAN KUBISTAR Box (X80). Tip:Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.Step 16
Install the V-ribbed belt.AUTODOC recommends:Make sure that the V-ribbed belt fits all pulleys snugly. - Step 17
Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16. - Step 18
Place the V-ribbed belt on the tensioner pulley. - Step 19
Return the tensioner pulley to its initial position.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the NISSAN Kubistar Van (X76) model
Popular maintenance tutorials for Nissan Kubistar Van X80
Complete guides for changing the Alternator belt on different NISSAN KUBISTAR models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your NISSAN Kubistar Van (X76)
View more
How to prevent car windows from fogging up | AUTODOC tips
Revitalize Your Car Interior: DIY Steering Wheel Cover with AUTODOC Tips
Why Checking Your Oil is Crucial for Engine Performance
How to Prevent Premature Wear on Your Car Boot Damper | AUTODOC
Most commonly replaced car parts on NISSAN KUBISTAR
Time to replace parts? Get even better deals in our Shop app.

SCAN ME



























