
Disclaimer
How to change front anti roll bar links on NISSAN PRIMASTAR Bus (X83) – replacement guide
downloads:
0
Views:
13
Important!
This replacement procedure can be used for:
NISSAN PRIMASTAR Bus (X83) 2.0, NISSAN PRIMASTAR Bus (X83) dCi 80, NISSAN PRIMASTAR Bus (X83) dCi 100, NISSAN PRIMASTAR Bus (X83) dCi 140, NISSAN PRIMASTAR Bus (X83) dCi 150, NISSAN PRIMASTAR Bus (X83) dCi 120, NISSAN PRIMASTAR Bus (X83) dCi 90, NISSAN PRIMASTAR Bus (X83) 2.0 … View more
The steps may slightly vary depending on the car design.
NISSAN PRIMASTAR Bus (X83) 2.0, NISSAN PRIMASTAR Bus (X83) dCi 80, NISSAN PRIMASTAR Bus (X83) dCi 100, NISSAN PRIMASTAR Bus (X83) dCi 140, NISSAN PRIMASTAR Bus (X83) dCi 150, NISSAN PRIMASTAR Bus (X83) dCi 120, NISSAN PRIMASTAR Bus (X83) dCi 90, NISSAN PRIMASTAR Bus (X83) 2.0 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for PRIMASTAR Bus (X83) and other NISSAN models
Anti-roll bar link
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Torque wrench
Combination spanner #16
Drive socket # 16
Drive socket # 17
HEX bit No.H6.
Wheel impact socket #17
Ratchet wrench
Wheel chock
Replacement: anti roll bar links – NISSAN PRIMASTAR Bus (X83). Tip from AUTODOC:
- Replace the stabiliser links on NISSAN PRIMASTAR Bus (X83) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- Warning! Shut down the engine before starting any work – NISSAN PRIMASTAR Bus (X83)
Carry out replacement in the following order:
- Step 1Secure the wheels with chocks.
- Step 2Loosen the wheel mounting bolts. Use wheel impact socket #17.
- Step 3Raise the front of the car and secure on supports.Step 4Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. NISSAN PRIMASTAR Bus (X83)
- Step 5Remove the wheel.
- Step 6Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
- Step 7Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #16. Use HEX No.H6. Use a ratchet wrench.
- Step 8Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #16. Use a ratchet wrench.
- Step 9Remove the stabilizer rod.Replacement: anti roll bar links – NISSAN PRIMASTAR Bus (X83). Tip:Examine stabiliser bushes. Replace them if needed.
- Step 10Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
- Step 11Ιnstall the transverse stabilizer link.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the NISSAN Primastar Minibus (X83) model
Popular maintenance tutorials for Nissan Primastar Minibus
Complete guides for changing the Drop links on different NISSAN PRIMASTAR models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your NISSAN PRIMASTAR Bus (X83)
View more
- How to easily repair a punctured tyre | AUTODOC tips
- How to Fix a Squealing Belt: Causes & Solutions | AUTODOC Expert Tips
- How to Prevent Premature Wear on Your Car Boot Damper | AUTODOC
- Don’t Replace, Restore: Fixing Damaged Threads at Home
Most commonly replaced car parts on NISSAN PRIMASTAR
Time to replace parts? Get even better deals in our Shop app.

SCAN ME