
Disclaimer
How to change front anti roll bar links on HYUNDAI ix55 – replacement guide
downloads:
0
Views:
6
Important!
This replacement procedure can be used for:
HYUNDAI ix55 3.0 V6 CRDi 4WD, HYUNDAI ix55 3.0 V6 CRDi 4WD, HYUNDAI ix55 3.8 V6, HYUNDAI ix55 3.8 V6 4WD, HYUNDAI ix55 3.8 V6 4WD, HYUNDAI ix55 3.8 V6 4WD, HYUNDAI ix55 3.0 V6 CRDi, HYUNDAI ix55 3.0 V6 CRDi, HYUNDAI ix55 3.0 V6 CRDi, HYUNDAI ix55 3.0 V6 CRDi 4WD, HYUNDAI ix55 3.0 V6 CRDi 4WD … View more
The steps may slightly vary depending on the car design.
HYUNDAI ix55 3.0 V6 CRDi 4WD, HYUNDAI ix55 3.0 V6 CRDi 4WD, HYUNDAI ix55 3.8 V6, HYUNDAI ix55 3.8 V6 4WD, HYUNDAI ix55 3.8 V6 4WD, HYUNDAI ix55 3.8 V6 4WD, HYUNDAI ix55 3.0 V6 CRDi, HYUNDAI ix55 3.0 V6 CRDi, HYUNDAI ix55 3.0 V6 CRDi, HYUNDAI ix55 3.0 V6 CRDi 4WD, HYUNDAI ix55 3.0 V6 CRDi 4WD … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for ix55 and other HYUNDAI models
Anti-roll bar link
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Torque wrench
Combination spanner #17
Drive socket # 17
Wheel impact socket #21
Ratchet wrench
Wheel chock
AUTODOC recommends:
- Replace the stabiliser links on HYUNDAI ix55 in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- Please note: all work on the car – HYUNDAI ix55 – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Secure the wheels with chocks.
- Step 2Loosen the wheel mounting bolts. Use wheel impact socket #21.
- Step 3Raise the front of the car and secure on supports.Step 4Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. HYUNDAI ix55
- Step 5Remove the wheel.
- Step 6Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.Step 7Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #17. Use a ratchet wrench.
- Step 8Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a drive socket #17. Use a ratchet wrench.
- Step 9Remove the stabiliser link.Replacement: anti roll bar links – HYUNDAI ix55. Professionals recommend:Examine stabiliser bushes. Replace them if needed.
- Step 10Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
- Step 11Install a new rod, tighten the fasteners.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the HYUNDAI ix55 (EN) model
Popular maintenance tutorials for HYUNDAI ix55
Complete guides for changing the Drop links on different HYUNDAI ix55 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your HYUNDAI ix55
View more
- Can You Hear Your Brakes Squeaking? Learn the Causes and DIY Solutions! | AUTODOC Tips
- Petrol or diesel: The engine showdown! | AUTODOC
- Top 5 mistakes when replacing spark plugs | AUTODOC tips
- How to Swap an M50 Engine in a BMW E30 Turbo | AUTODOC Project
Most commonly replaced car parts on HYUNDAI ix55
Time to replace parts? Get even better deals in our Shop app.

SCAN ME