Important!
This replacement procedure can be used for:
HONDA STREAM (RN) 1.7 16V (RN1), HONDA STREAM (RN) 2.0 16V (RN3) View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Anti Roll Bar Links for STREAM (RN) and other HONDA models
Tools
Replacement: anti roll bar links – HONDA STREAM (RN). Tools you might need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #14
HEX bit no.H6.
Wheel impact socket #19
Ratchet wrench
Torque wrench
Crow bar
Wheel chock
AUTODOC recommends:
  • Replace the stabiliser links on HONDA STREAM (RN) in pairs.
  • The replacement procedure is identical for both stabiliser links on the same axle.
  • Please note: all work on the car – HONDA STREAM (RN) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    How to change Anti Roll Bar Links on Honda Stream 1 2001 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace HONDA STREAM (RN) 2.0 16V (RN3) 2002 Anti Roll Bar Links - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #19.
  3. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    Honda Stream 1 1.7 16V (RN1) 2003 Anti Roll Bar Links replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. HONDA STREAM (RN)
  4. Step 5
    Changing Anti Roll Bar Links on HONDA STREAM (RN) 1.7 16V (RN1) 2004 by yourself
    Remove the wheel.
  5. Step 6
    How to remove HONDA STREAM 2.0 16V (RN3) 2005 Anti Roll Bar Links - online easy-to-follow instructions
    Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Anti Roll Bar Links on HONDA STREAM (RN) 2006: download PDF manuals and video instructions
    Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #14 (2 pieces).
  7. Step 8
    How hard is it to do yourself: Anti Roll Bar Links replacement on Honda Stream 1 2.0 16V (RN3) 2007 - download illustrated guide
    Unscrew the fastener connecting the stabilizer link to the control arm. Use a combination spanner #14 (2 pieces).
  8. Step 9
    Need to know how to renew Anti Roll Bar Links on HONDA STREAM 2008? This free workshop manual will help you to do it yourself
    Remove the stabilizer rod.
  9. Step 10
    Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
    Step 11
    Changing of Anti Roll Bar Links on Honda Stream 1 2009 won't be an issue if you follow this illustrated step-by-step guide
    Ιnstall the transverse stabilizer link. Use a crowbar.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the HONDA Stream I (RN) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
HONDA STREAM (RN) Anti Roll Bar Links replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY HONDA STREAM (RN) Anti Roll Bar Links replacement - online guide
Tips & tricks for your HONDA STREAM (RN)
View more
  • How to change Drop links on HONDA STREAM (RN) 2.0 16V (RN3) - replacement tricks
    How to unlock your car without a key | AUTODOC tips
  • Changing Stabilizer link Honda Stream 1 2.0 16V (RN3) - Replacement Tips
    How do EGR valves work? | AUTODOC
  • Maintenance Hacks - HONDA STREAM (RN) 1.7 16V (RN1) Sway bar link replacement guide
    Top 5 mistakes when working in the engine bay | AUTODOC tips
  • Replace Drop link on Honda Stream 1 - free video tips
    Top 5 mistakes when buying car parts