Important!
This replacement procedure can be used for:
HONDA CR-V II (RD_) 2.0 (RD5) View more

The steps may slightly vary depending on the car design.

How to change rear Anti Roll Bar Link on HONDA CR-V II [TUTORIAL AUTODOC]

video
All the parts you need to replace – Anti Roll Bar Links for CR-V II (RD_) and other HONDA models
Alternative products
How to change Anti-roll bar link on Honda CR-V Mk2 2.0 (RD5) – step-by-step instructions for straightforward car repair Anti-roll bar link
Tools
Replacement: anti roll bar links – Honda CR-V II. Tools you need:
Wire brush
WD-40 spray
Copper grease
Combination spanner #14
Combination spanner #17
Drive socket # 14
Drive socket # 17
HEX bit no.H6.
Ratchet wrench
Torque wrench
AUTODOC recommends:
  • Replace the stabiliser links on Honda CR-V II in pairs.
  • The replacement procedure is identical for both stabiliser links on the same axle.
  • Please note: all work on the car – Honda CR-V II – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    How to change Anti Roll Bar Links on Honda CR-V Mk2 2001 - free PDF and video manuals
    Lift the car using a jack or place it over an inspection pit.
  2. Step 2
    How to replace HONDA CR-V II (RD_) 2.0 (RD5) 2002 Anti Roll Bar Links - step-by-step manuals and video guides
    Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
  3. Step 3
    Honda CR-V Mk2 2.2 CTDi (RD9) 2003 Anti Roll Bar Links replacement: free workshop manuals
    Unscrew the fastener connecting the stabilizer link to the control arm. Use a combination spanner #14. Use a drive socket #14. Use a ratchet wrench.
  4. Step 4
    Changing Anti Roll Bar Links on HONDA CR-V II (RD_) 2.4 Vtec 4WD 2004 by yourself
    Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #14. Use a drive socket #14. Use a ratchet wrench.
  5. Step 5
    How to remove HONDA CR-V 2.4 2005 Anti Roll Bar Links - online easy-to-follow instructions
    Remove the stabilizer rod.
  6. Step 6
    How to replace Anti Roll Bar Links on HONDA CR-V II (RD_) 2006: download PDF manuals and video instructions
    Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the HONDA CR-V II (RD) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY HONDA CR-V II (RD_) Anti Roll Bar Links replacement - online guide
Tips & tricks for your HONDA CR-V II (RD_)
View more
  • How to change Drop links on HONDA CR-V II (RD_) 2.0 - replacement tricks
    How to easily repair a punctured tyre | AUTODOC tips
  • Changing Stabilizer link Honda CR-V Mk2 2.0 (RD5) - Replacement Tips
    K2 ROTON wheel cleaner overview
  • Maintenance Hacks - HONDA CR-V II (RD_) 2.2 CTDi (RD9) Sway bar link replacement guide
    Top 5 car noises you shouldn't ignore
  • Replace Drop link on Honda CR-V Mk2 - free video tips
    When, why, and how to change engine oil | AUTODOC tips
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
HONDA CR-V II (RD_) Anti Roll Bar Links replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME