Disclaimer
How to change front anti roll bar links on FORD TRANSIT CONNECT Kombi – replacement guide
downloads:
2
Views:
41
Important!
This replacement procedure can be used for:
FORD TRANSIT CONNECT Kombi 1.6 TDCi, FORD TRANSIT CONNECT Kombi 1.6 TDCi, FORD TRANSIT CONNECT Kombi 1.6 TDCi, FORD TRANSIT CONNECT Kombi 1.5 TDCi, FORD TRANSIT CONNECT Kombi 1.5 TDCi, FORD TRANSIT CONNECT Kombi 1.5 TDCi, FORD TRANSIT CONNECT Kombi 1.5 EcoBlue, FORD TRANSIT CONNECT Kombi 1.5 EcoBlue, FORD TRANSIT CONNECT Kombi 1.5 EcoBlue … View more
The steps may slightly vary depending on the car design.
FORD TRANSIT CONNECT Kombi 1.6 TDCi, FORD TRANSIT CONNECT Kombi 1.6 TDCi, FORD TRANSIT CONNECT Kombi 1.6 TDCi, FORD TRANSIT CONNECT Kombi 1.5 TDCi, FORD TRANSIT CONNECT Kombi 1.5 TDCi, FORD TRANSIT CONNECT Kombi 1.5 TDCi, FORD TRANSIT CONNECT Kombi 1.5 EcoBlue, FORD TRANSIT CONNECT Kombi 1.5 EcoBlue, FORD TRANSIT CONNECT Kombi 1.5 EcoBlue … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for TRANSIT CONNECT Kombi and other FORD models
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #15
HEX bit no.H5.
Drive socket # 15
Wheel impact socket #19
Ratchet wrench
Torque wrench
Wheel chock
Replacement: anti roll bar links – FORD TRANSIT CONNECT Kombi. AUTODOC experts recommend:
- Replace the stabiliser links on FORD TRANSIT CONNECT Kombi in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- Warning! Shut down the engine before starting any work – FORD TRANSIT CONNECT Kombi.
Carry out replacement in the following order:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #19. - Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. FORD TRANSIT CONNECT Kombi - Step 5
Remove the wheel. - Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the fasteners connecting the stabiliser link to the stabiliser bar. Use a combination spanner #15. Use HEX No.H5. Use a ratchet wrench. - Step 8
Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #15. Use a ratchet wrench. - Step 9
Remove the stabilizer rod.Replacement: anti roll bar links – FORD TRANSIT CONNECT Kombi. AUTODOC recommends:Examine stabiliser bushes. Replace them if needed. - Step 10
Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray. - Step 11
Install a new rod, tighten the fasteners. Use a combination spanner #15. Use HEX No.H5. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the FORD Transit Connect Mk2 Estate model
Popular maintenance tutorials for Ford Transit Connect Estate
Complete guides for changing the Drop links on different FORD TRANSIT CONNECT models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your FORD TRANSIT CONNECT Kombi
View more
What to do if your car’s bonnet won’t open | AUTODOC tips
DIY alternator repair | AUTODOC tips
Initial Car Inspection: What to Check Before You Buy
5 Essential Tips to Prepare Your Car for Winter | AUTODOC tips
Most commonly replaced car parts on FORD TRANSIT CONNECT
Time to replace parts? Get even better deals in our Shop app.

SCAN ME































