Important!

This replacement procedure can be used for:
FORD Tourneo Connect / Grand Tourneo Connect V408 Estate 1.6 TDCi, FORD Tourneo Connect / Grand Tourneo Connect V408 Estate 1.0 EcoBoost, FORD Tourneo Connect / Grand Tourneo Connect V408 Estate 1.6 TDCi, FORD Tourneo Connect / Grand Tourneo Connect V408 Estate 1.6 TDCi, FORD Tourneo Connect / Grand Tourneo Connect V408 Estate 1.5 TDCi, FORD Tourneo Connect / Grand Tourneo Connect V408 Estate 1.5 TDCi, FORD Tourneo Connect / Grand Tourneo Connect V408 Estate 1.5 TDCi, FORD Tourneo Connect / Grand Tourneo Connect V408 Estate 1.5 EcoBlue, FORD Tourneo Connect / Grand Tourneo Connect V408 Estate 1.5 EcoBlue, FORD Tourneo Connect / Grand Tourneo Connect V408 Estate 1.5 EcoBlue, FORD Tourneo Connect / Grand Tourneo Connect V408 Estate 1.5 TDCi … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Anti Roll Bar Links for Tourneo Connect / Grand Tourneo Connect V408 Estate and other FORD models

Anti-roll bar link

        Anti-roll bar link for Tourneo Connect / Grand Tourneo Connect V408 Estate Diesel (95 hp)
      
        Anti-roll bar link for Tourneo Connect / Grand Tourneo Connect V408 Estate Petrol (100 hp)
      
        Anti-roll bar link for Tourneo Connect / Grand Tourneo Connect V408 Estate Diesel (115 hp)
      
        Anti-roll bar link for Tourneo Connect / Grand Tourneo Connect V408 Estate Diesel (75 hp)
      
        Anti-roll bar link for Tourneo Connect / Grand Tourneo Connect V408 Estate Diesel (101 hp)
      
        Anti-roll bar link for Tourneo Connect / Grand Tourneo Connect V408 Estate Diesel (75 hp)
      
        Anti-roll bar link for Tourneo Connect / Grand Tourneo Connect V408 Estate Diesel (120 hp)
      
        Anti-roll bar link for Tourneo Connect / Grand Tourneo Connect V408 Estate Diesel (120 hp)
      
        Anti-roll bar link for Tourneo Connect / Grand Tourneo Connect V408 Estate Diesel (101 hp)

Replacement: anti roll bar links – FORD TOURNEO CONNECT / GRAND TOURNEO CONNECT Kombi. List of the tools you'll need:

                        Wire brush
                      
                        WD-40 spray
                      
                        Brake cleaner
                      
                        Copper grease
                      
                        Combination spanner #15
                      
                        HEX bit no.H5.
                      
                        Drive socket # 15
                      
                        Wheel impact socket #19
                      
                        Ratchet wrench
                      
                        Torque wrench
                      
                        Wheel chock

Buy tools

Replacement: anti roll bar links – FORD TOURNEO CONNECT / GRAND TOURNEO CONNECT Kombi. AUTODOC experts recommend:

Replace the stabiliser links on FORD TOURNEO CONNECT / GRAND TOURNEO CONNECT Kombi in pairs.
The replacement procedure is identical for both stabiliser links on the same axle.
Warning! Shut down the engine before starting any work – FORD TOURNEO CONNECT / GRAND TOURNEO CONNECT Kombi.

Carry out replacement in the following order:

Step 1

Secure the wheels with chocks.
Step 2

Loosen the wheel mounting bolts. Use wheel impact socket #19.
Step 3

Raise the front of the car and secure on supports.

Step 4

Unscrew the wheel bolts.

AUTODOC recommends:
Important! Hold the wheel while unscrewing the fastening bolts. FORD TOURNEO CONNECT / GRAND TOURNEO CONNECT Kombi
Step 5

Remove the wheel.
Step 6

Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
Step 7

Unscrew the fasteners connecting the stabiliser link to the stabiliser bar. Use a combination spanner #15. Use HEX No.H5. Use a ratchet wrench.
Step 8

Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #15. Use a ratchet wrench.
Step 9

Remove the stabilizer rod.

Replacement: anti roll bar links – FORD TOURNEO CONNECT / GRAND TOURNEO CONNECT Kombi. AUTODOC recommends:
Examine stabiliser bushes. Replace them if needed.
Step 10

Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
Step 11

Install a new rod, tighten the fasteners. Use a combination spanner #15. Use HEX No.H5. Use a ratchet wrench.
Step 12

Tighten the fastener connecting the stabilizer link to the shock strut. Use a drive socket #15. Use a torque wrench. Tighten it to 48 Nm torque.
Step 13

Tighten the fastener connecting the stabilizer link to the stabilizer bar. Use a drive socket #15. Use a torque wrench. Tighten it to 48 Nm torque.
Step 14

Treat all joints of the stabiliser link. Use copper grease.
Step 15

Treat the surface where the brake disc contacts the wheel rim. Use copper grease.
Step 16

Clean the brake disk surface. Use a brake cleaner.

AUTODOC recommends:
Replacement: anti roll bar links – FORD TOURNEO CONNECT / GRAND TOURNEO CONNECT Kombi. After applying the spray, wait a few minutes.
Step 17

Install the wheel.

Replacement: anti roll bar links – FORD TOURNEO CONNECT / GRAND TOURNEO CONNECT Kombi. Tip:
To avoid injury, hold up the wheel when screwing in the fastening bolts.
Step 18

Screw in the wheel bolts. Use wheel impact socket #19.
Step 19

Lower the car and working in a cross order, tighten the wheel bolts. Use wheel impact socket #19. Use a torque wrench. Tighten it to 110 nm torque.
Step 20

Remove the jacks and chocks.

Was this manual helpful?

Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.

Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the FORD Tourneo Connect / Grand Tourneo Connect V408 Estate model.

Browse tyres

How to change front brake pads on FORD Tourneo Connect / Grand Tourneo Connect V408 Estate – replacement guide

Free download PDF
2.36 MB
How to change rear brake pads on FORD Tourneo Connect / Grand Tourneo Connect V408 Estate – replacement guide

Free download PDF
1.72 MB
How to change serpentine belt on FORD Tourneo Connect / Grand Tourneo Connect V408 Estate – replacement guide

Free download PDF
768 KB
How to change engine oil and filter on FORD Tourneo Connect / Grand Tourneo Connect V408 Estate – replacement guide

Free download PDF
2.56 MB
How to change fuel filter on FORD Tourneo Connect / Grand Tourneo Connect V408 Estate – replacement guide

Free download PDF
1.66 MB
How to change water pump & timing belt kit on FORD Tourneo Connect / Grand Tourneo Connect V408 Estate – replacement guide

Free download PDF
7.56 MB

How to change anti roll bar links on a car – replacement tutorial

Universal

Free download PDF
972.8 KB
How to change front anti roll bar links on Ford Focus MK2 – replacement guide

Free download PDF
1.99 MB
How to change front anti roll bar links on Ford Mondeo Mk3 saloon – replacement guide

Free download PDF
1.29 MB
How to change front anti roll bar links on Ford Focus DAW – replacement guide

Free download PDF
1.27 MB
How to change rear anti roll bar links on Ford Mondeo Mk3 saloon – replacement guide

Free download PDF
1.23 MB
How to change front anti roll bar links on Ford Fiesta JA8 – replacement guide

Free download PDF
1.31 MB

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!

Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.

Scan

To download the app:

- scan the QR code
- download from App Store
- download from Google Play

How to remove rust | AUTODOC tips

25K views

Published on: 16/09/2021
How to Make a DIY Foam Sprayer | AUTODOC tips

208K views

Published on: 23/06/2022
How to paint a brake caliper | AUTODOC tips

10K views

Published on: 08/04/2021
What to do if the belt squeals | AUTODOC tips

4K views

Published on: 04/03/2021