Disclaimer
How to change front anti roll bar links on FORD Fiesta Mk5 Saloon (JAS, JBS) – replacement guide
downloads:
0
Views:
2
Important!
This replacement procedure can be used for:
FORD Fiesta Mk5 Saloon (JAS, JBS) 1.4 TDCi, FORD Fiesta Mk5 Saloon (JAS, JBS) 1.6, FORD Fiesta Mk5 Saloon (JAS, JBS) 1.0 Flex, FORD Fiesta Mk5 Saloon (JAS, JBS) 1.6 Flex … View more
The steps may slightly vary depending on the car design.
FORD Fiesta Mk5 Saloon (JAS, JBS) 1.4 TDCi, FORD Fiesta Mk5 Saloon (JAS, JBS) 1.6, FORD Fiesta Mk5 Saloon (JAS, JBS) 1.0 Flex, FORD Fiesta Mk5 Saloon (JAS, JBS) 1.6 Flex … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for Fiesta Mk5 Saloon (JAS, JBS) and other FORD models
Anti-roll bar link
Anti-roll bar link
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #15
HEX bit no.H5.
Drive socket # 15
Wheel impact socket #19
Ratchet wrench
Torque wrench
Wheel chock
Replacement: anti roll bar links – FORD FIESTA Saloon JAS JBS. AUTODOC experts recommend:
- Replace the stabiliser links on FORD FIESTA Saloon JAS JBS in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- Warning! Shut down the engine before starting any work – FORD FIESTA Saloon JAS JBS.
Carry out replacement in the following order:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #19. - Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. FORD FIESTA Saloon JAS JBS - Step 5
Remove the wheel. - Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the fasteners connecting the stabiliser link to the stabiliser bar. Use a combination spanner #15. Use HEX No.H5. Use a ratchet wrench. - Step 8
Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #15. Use a ratchet wrench. - Step 9
Remove the stabilizer rod.Replacement: anti roll bar links – FORD FIESTA Saloon JAS JBS. AUTODOC recommends:Examine stabiliser bushes. Replace them if needed. - Step 10
Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray. - Step 11
Install a new rod, tighten the fasteners. Use a combination spanner #15. Use HEX No.H5. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?
Find out which tyre and wheel sizes are compatible with the FORD Fiesta Mk5 Saloon (JAS, JBS) model.
Popular maintenance tutorials for Ford Fiesta Mk5 Saloon
Free download PDF
1.47 MB
Free download PDF1.78 MB
Free download PDF2 MB
Free download PDF1.28 MB
Free download PDF931.84 KB
Free download PDF7.83 MB
Complete guides for changing the Drop links on different FORD FIESTA models
Free download PDF1.31 MB
Free download PDF1.49 MB
Free download PDF1.26 MB
Free download PDF1.29 MB
Free download PDF1.26 MB
Free download PDF1.26 MB
Your profile is your personal assistant.
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan
To download the app:
- - scan the QR code
- - download from App Store
- - download from Google Play
Tips & tricks for your FORD Fiesta Mk5 Saloon (JAS, JBS)
View more
5 most common causes of oil leaks | AUTODOC tips
Replacing your engine cooling fan | AUTODOC tips
5 car interior cleaning mistakes | AUTODOC tips
How to restore a steering wheel | AUTODOC tips
