Important!

This replacement procedure can be used for:
FORD Fiesta Mk5 Hatchback (JH1, JD1, JH3, JD3) 1.0, FORD Fiesta Mk5 Hatchback (JH1, JD1, JH3, JD3) 1.6, FORD Fiesta Mk5 Hatchback (JH1, JD1, JH3, JD3) 1.4 TDCi, FORD Fiesta Mk5 Hatchback (JH1, JD1, JH3, JD3) 1.3, FORD Fiesta Mk5 Hatchback (JH1, JD1, JH3, JD3) 1.3, FORD Fiesta Mk5 Hatchback (JH1, JD1, JH3, JD3) 1.6 16V, FORD Fiesta Mk5 Hatchback (JH1, JD1, JH3, JD3) 1.25 16V, FORD Fiesta Mk5 Hatchback (JH1, JD1, JH3, JD3) 1.25 16V, FORD Fiesta Mk5 Hatchback (JH1, JD1, JH3, JD3) 1.6 TDCi, FORD Fiesta Mk5 Hatchback (JH1, JD1, JH3, JD3) ST150, FORD Fiesta Mk5 Hatchback (JH1, JD1, JH3, JD3) 1.3 ROCAM … View more

The steps may slightly vary depending on the car design.

How to change front anti roll bar link on FORD FIESTA V JH, JD [TUTORIAL AUTODOC]

All the parts you need to replace – Anti Roll Bar Links for Fiesta Mk5 Hatchback (JH1, JD1, JH3, JD3) and other FORD models

Alternative products

Anti-roll bar link

Replacement: anti roll bar links – Ford Fiesta V JH JD Tools you might need:

                      Wire brush
                    
                      WD-40 spray
                    
                      Brake cleaner 
                    
                      Copper grease 
                    
                      Combination spanner #17
                    
                      Drive socket # 17 
                    
                      Wheel impact socket #19
                    
                      Ratchet wrench
                    
                      Torque wrench
                    
                      Wheel chock

Buy tools

Replacement: anti roll bar links – Ford Fiesta V JH JD Professionals recommend:

Replace the stabiliser links on Ford Fiesta V JH JD in pairs.
The replacement procedure is identical for both stabiliser links on the same axle.
All work should be done with the engine stopped.

Replacement: anti roll bar links – Ford Fiesta V JH JD Take the following steps:

Step 1

Secure the wheels with chocks.
Step 2

Loosen the wheel mounting bolts. Use wheel impact socket #19.
Step 3

Raise the front of the car and secure on supports.
Step 4

Unscrew the wheel bolts.

Replacement: anti roll bar links – Ford Fiesta V JH JD AUTODOC recommends:
To avoid injury, hold up the wheel when unscrewing the bolts.
Step 5

Remove the wheel.
Step 6

Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
Step 7

Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #17 (2 pieces).
Step 8

Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #17. Use a ratchet wrench.
Step 9

Remove the stabilizer rod.

Replacement: anti roll bar links – Ford Fiesta V JH JD AUTODOC experts recommend:
Examine stabiliser bushes. Replace them if needed.
Step 10

Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
Step 11

Ιnstall the transverse stabilizer link.
Step 12

Tighten the stabiliser link fastener. Use a drive socket #17. Use a ratchet wrench.
Step 13

Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
Step 14

Ιnstall the transverse stabilizer link.
Step 15

Tighten the stabiliser link fastener. Use a combination spanner #17 (2 pieces).
Step 16

Tighten the fastener connecting the stabilizer link to the stabilizer bar. Use a drive socket #17. Use a torque wrench. Tighten it to 55 Nm torque.
Step 17

Tighten the fastener connecting the stabilizer link to the shock strut. Use a drive socket #17. Use a torque wrench. Tighten it to 48 Nm torque.
Step 18

Treat all joints of the stabiliser link. Use copper grease.
Step 19

Treat the surface where the brake disc contacts the wheel rim. Use copper grease.
Step 20

Clean the brake disk surface. Use a brake cleaner.

AUTODOC recommends:
Replacement: anti roll bar links – Ford Fiesta V JH JD After applying the spray, wait a few minutes.
Step 21

Install the wheel.

Replacement: anti roll bar links – Ford Fiesta V JH JD Tip:
To avoid injury, hold up the wheel when screwing in the fastening bolts.
Step 22

Screw in the wheel bolts. Use wheel impact socket #19.
Step 23

Lower the car and working in a cross order, tighten the wheel bolts. Use wheel impact socket #19. Use a torque wrench. Tighten it to 95 nm torque.
Step 24

Remove the jacks and chocks.

Was this manual helpful?

Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.

Need New Tyres?

Find out which tyre and wheel sizes are compatible with the FORD Fiesta Mk5 Hatchback (JH1, JD1, JH3, JD3) model

Ford Fiesta Mk5 tyre size

How to change rear wheel bearing on Ford Fiesta V JH JD – replacement guide

Free download PDF
1.53 MB
How to change front lower arm on Ford Fiesta V JH JD – replacement guide

Free download PDF
2.87 MB
How to change front wheel bearing on Ford Fiesta V JH JD – replacement guide

Free download PDF
2.73 MB
How to change track rod end on Ford Fiesta V JH JD – replacement guide

Free download PDF
1.54 MB
How to change rear strut mount on Ford Fiesta V JH JD – replacement guide

Free download PDF
2.6 MB
How to change front strut mount on Ford Fiesta V JH JD – replacement guide

Free download PDF
3.74 MB

How to change front anti roll bar links on Ford Fiesta JA8 – replacement guide

Free download PDF
1.31 MB
How to change front anti roll bar links on FORD Fiesta Mk4 Hatchback (JAS, JBS) – replacement guide

Free download PDF
1.26 MB
How to change front anti roll bar links on FORD Fiesta Mk6 Van – replacement guide

Free download PDF
1.26 MB
How to change front anti roll bar links on FORD FIESTA III (GFJ) – replacement guide

Free download PDF
1.29 MB
How to change front anti roll bar links on FORD Fiesta Mk6 Saloon – replacement guide

Free download PDF
1.26 MB
How to change front anti roll bar links on FORD Fiesta Mk5 Van – replacement guide

Free download PDF
1.42 MB

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

When, why, and how to change engine oil | AUTODOC tips

6K views

Published on: 16/08/2024
Top Automatic Transmission Blunders You Must Dodge | AUTODOC Insights

7K views

Published on: 26/01/2021
BMW E30 Turbo Suspension Swap: Boost Your Handling | AUTODOC project

2K views

Published on: 04/03/2021
What to do if your check engine light is on | AUTODOC tips

19K views

Published on: 19/08/2020