Important!

This replacement procedure can be used for:
CITROËN BERLINGO (B9) 1.6 … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

Alternative products

Anti-roll bar link

Replacement: anti roll bar links – CITROËN BERLINGO (B9). List of the tools you'll need:

                      Wire brush
                    
                      WD-40 spray
                    
                      Brake cleaner 
                    
                      Copper grease 
                    
                      Drive socket # 17 
                    
                      Wheel impact socket #19
                    
                      Torque wrench
                    
                      Wheel chock

Buy tools

AUTODOC recommends:

Replace the stabiliser links on CITROËN BERLINGO (B9) in pairs.
The replacement procedure is identical for both stabiliser links on the same axle.
All work should be done with the engine stopped.

Replacement: anti roll bar links – CITROËN BERLINGO (B9). Take the following steps:

Step 1

Secure the wheels with chocks.
Step 2

Loosen the wheel mounting bolts. Use wheel impact socket #19.
Step 3

Raise the front of the car and secure on supports.

Step 4

Unscrew the wheel bolts.

AUTODOC recommends:
Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. CITROËN BERLINGO (B9)
Step 5

Remove the wheel.
Step 6

Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
Step 7

Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a drive socket #17.
Step 8

Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #17.
Step 9

Remove the stabilizer rod.

Replacement: anti roll bar links – CITROËN BERLINGO (B9). Tip from AUTODOC:
Examine stabiliser bushes. Replace them if needed.
Step 10

Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
Step 11

Install a new rod, tighten the fasteners.
Step 12

Tighten the fastener connecting the stabilizer link to the shock strut. Use a drive socket #17. Use a torque wrench. Tighten it to 40 Nm torque.
Step 13

Tighten the fastener connecting the stabilizer link to the stabilizer bar. Use a drive socket #17. Use a torque wrench. Tighten it to 40 Nm torque.
Step 14

Treat all joints of the stabiliser link. Use copper grease.
Step 15

Treat the surface where the brake disc contacts the wheel rim. Use copper grease.
Step 16

Clean the brake disk surface. Use a brake cleaner.

AUTODOC recommends:
Replacement: anti roll bar links – CITROËN BERLINGO (B9). After applying the spray, wait a few minutes.
Step 17

Install the wheel.

AUTODOC recommends:
Important! Hold the wheel while screwing in the fastening bolts. CITROËN BERLINGO (B9)
Step 18

Screw in the wheel bolts. Use wheel impact socket #17.
Step 19

Lower the car and working in a cross order, tighten the wheel bolts. Use wheel impact socket #17. Use a torque wrench. Tighten it to 100 nm torque.
Step 20

Remove the jacks and chocks.

Was this manual helpful?

Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.

Need New Tyres?

Find out which tyre and wheel sizes are compatible with the CITROËN Berlingo II (B9) model

CITROËN BERLINGO (B9) tyre size

How to change rear wheel bearing on CITROËN BERLINGO (B9) – replacement guide

Free download PDF 1.52 MB
How to change front lower arm on CITROËN BERLINGO (B9) – replacement guide

Free download PDF 1.93 MB
How to change front wheel bearing on CITROËN BERLINGO (B9) – replacement guide

Free download PDF 5.01 MB
How to change front ball joint on CITROËN BERLINGO (B9) – replacement guide

Free download PDF 2.46 MB
How to change rear brake pads on CITROËN BERLINGO (B9) – replacement guide

Free download PDF 1.59 MB
How to change front brake discs on CITROËN BERLINGO (B9) – replacement guide

Free download PDF 2 MB

How to change front anti roll bar links on CITROËN Berlingo II Van (B9) – replacement guide

Free download PDF 1.98 MB
How to change front anti roll bar links on CITROËN BERLINGO Box (B9) – replacement guide

Free download PDF 1.09 MB
How to change front anti roll bar links on CITROËN Berlingo / Berlingo First I (MF, GJK, GFK) – replacement guide

Free download PDF 2.14 MB
How to change front anti roll bar links on CITROËN Berlingo Van (K9) – replacement guide

Free download PDF 1.34 MB
How to change front anti roll bar links on Citroën Berlingo M – replacement guide

Free download PDF 1.14 MB
How to change front anti roll bar links on CITROËN Berlingo (K9) – replacement guide

Free download PDF 1.34 MB

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

How to replace a timing chain yourself

23K views

Published on: 12/12/2024
Unveiling the secrets: Detecting vacuum leaks with a Smoke Machine | AUTODOC

20K views

Published on: 23/07/2020
TOP 5 mistakes when replacing shock absorbers | AUTODOC tips

15K views

Published on: 15/06/2023
Don’t Replace, Just Polish! Headlight Restoration with AUTODOC

10K views

Published on: 13/01/2021