How to change pollen filter on Fiat Bravo 2 – replacement guide
downloads:
5
Views:
310
0
Users voted – 0
Recommended replacement interval for the part category Pollen filter : 15month / 30000km
Important!
This replacement procedure can be used for:
FIAT BRAVO II (198) 1.4 16V (198AXS1B),
FIAT BRAVO II (198) 1.6 D Multijet (198AXM1B),
FIAT BRAVO II (198) 1.9 D Multijet (198AXD1A),
FIAT BRAVO II (198) 1.4 LPG (198AXA1B),
FIAT BRAVO II (198) 2.0 D Multijet (198AXPIB),
FIAT BRAVO II (198) 1.9 D Multijet (198AXB1A),
FIAT BRAVO II (198) 1.9 D Multijet (198AXC1B),
FIAT BRAVO II (198) 1.4 (198AXA1B),
FIAT BRAVO II (198) 1.4 T-Jet (198AXG1B),
FIAT BRAVO II (198) 1.4 T-Jet (198AXF1B),
FIAT BRAVO II (198) 1.6 D Multijet (198AXL1B),
FIAT BRAVO II (198) 1.9 D Multijet (198AXE1A),
FIAT BRAVO II (198) 2.0 D Multijet (198AXN1B)
…
View more
The steps may slightly vary depending on the car design.
How to change pollen filter / cabin filter on FIAT BRAVO 2 (198) [TUTORIAL AUTODOC]
All the parts you need to replace – Pollen Filter for BRAVO II (198) and other FIAT models
Replacement: pollen filter – Fiat Bravo 2. AUTODOC recommends:
Replace the cabin filter at least once every six months, in early spring and autumn seasons.
Follow the terms, recommendations and requirements of the part operation provided by the manufacturer.
If the air flow into the cabin has sharply reduced, replace the filter before a scheduled maintenance.
In some cars, the heater unit is located on the passenger side.
All work should be done with the engine stopped.
Replacement: pollen filter – Fiat Bravo 2. Recommended sequence of steps:
Step 1
Move the passenger seat fully backwards.
Step 2
Pry up, carefully release from the fasteners and remove the side trim panel on the passenger side.
Step 3
Unscrew the fasteners of the cabin filter housing cover. Use a Phillips screwdriver.
Step 4
Remove the cabin filter housing cover.
AUTODOC recommends:
Replacement: pollen filter – Fiat Bravo 2. Do not use excessive force when removing the part as this may damage it.
Step 5
Remove the cabin filter.
Replacement: pollen filter – Fiat Bravo 2. Tip from AUTODOC experts:
Do not attempt to clean and reuse the filter - it will affect the quality of air cleaning inside the car.
Step 6
Install the cabin filter to its mounting seat.
Replacement: pollen filter – Fiat Bravo 2. Professionals recommend:
Check out the correct location of the filter element. Do not skew.Follow the air flow direction arrow on the filter.Attention! Use quality filters – Fiat Bravo 2.
Step 7
Reinstall the cabin filter housing cover.
Step 8
Screw in the fasteners of the cabin filter housing cover. Use a Phillips screwdriver.
Step 9
Install the side trim panel. Position the part using the guides and lock the fasteners.
AUTODOC recommends:
Replacement: pollen filter – Fiat Bravo 2. Do not use excessive force during installation. This may damage the fasteners.
Step 10
Return the passenger seat to its initial position.
Step 11
Switch on the ignition.
Step 12
Switch on the air conditioning system. This is necessary in order to make sure that the component operates properly.
Step 13
Switch off the ignition.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?
Find out which tyre and wheel sizes are compatible with the FIAT Bravo II Hatchback (198) model.
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan
To download the app:
- scan the QR code
- download from App Store
- download from Google Play
Tips & tricks for your FIAT BRAVO II (198)
View more
5 tools that make car repair incredibly simple | AUTODOC tips
What to do if the ABS light comes on | AUTODOC tips
How to polish your car | AUTODOC tips
TOP 5 mistakes when replacing shock absorbers | AUTODOC tips