Disclaimer
How to change engine radiator on VW SCIROCCO (53B) – replacement guide
downloads:
31
Views:
399
Important!
This replacement procedure can be used for:
VW SCIROCCO (53B) 1.8, VW SCIROCCO (53B) 1.6, VW SCIROCCO (53B) 1.6, VW SCIROCCO (53B) 1.5 … View more
The steps may slightly vary depending on the car design.
VW SCIROCCO (53B) 1.8, VW SCIROCCO (53B) 1.6, VW SCIROCCO (53B) 1.6, VW SCIROCCO (53B) 1.5 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Engine Radiator for SCIROCCO (53B) and other VW models
Alternative products

Torque wrench
Drive socket # 7
Drive socket # 10
Ratchet wrench
Adjustable wrench
Fluid container
Funnel
Fender cover
Replacement: engine radiator – VW SCIROCCO (53B). Tip from AUTODOC experts:
- Follow the terms, recommendations and requirements of the part operation provided by the manufacturer.
- Check the coolant condition and replace it if necessary.
- Please note: all work on the car – VW SCIROCCO (53B) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Unscrew the coolant reservoir cap. - Step 4
Prepare a container for fluids. - Step 5
Loosen the coolant hose clamp. Use a drive socket #7. Use a ratchet wrench. - Step 6
Detach the coolant hose.Replacement: engine radiator – VW SCIROCCO (53B). AUTODOC experts recommend:Caution! Coolant may come out from the water pump channels and body. - Step 7
Drain the coolant from the engine.Replacement: engine radiator – VW SCIROCCO (53B). Professionals recommend:Caution! The coolant can be very hot.Wear gloves to prevent contact with hot liquid.All work should be done with the engine stopped.Wait until the coolant has completely flowed out of the drain hole. - Step 8
Detach the engine cooling fan connector. - Step 9
Unscrew the fan housing fasteners. Use a drive socket #10. Use a ratchet wrench. - Step 10
Remove the fan shroud. - Step 11
Unplug the connector of the coolant temperature sensor. - Step 12
Loosen the coolant hose clamp. Use a drive socket #7. Use a ratchet wrench. - Step 13
Detach the coolant hose. - Step 14
Unscrew the radiator fasteners. Use a drive socket #10. Use a ratchet wrench. - Step 15
Loosen the coolant hose clamp. Use a drive socket #7. Use a ratchet wrench. - Step 16
Detach the coolant hose. - Step 17
Remove the radiator. - Step 18
Unscrew the fasteners of the radiator air guides. Use a drive socket #10. Use a ratchet wrench. - Step 19
Remove the radiator air guides. - Step 20
Unscrew the coolant temperature sensor. Use an adjustable wrench. - Step 21
Screw in and tighten the coolant temperature sensor. Use an adjustable wrench. Use a torque wrench. Tighten it to 16 nm torque. - Step 22
Install the radiator air guides. - Step 23
Screw in the fasteners of the radiator air guides. Use a drive socket #10. Use a ratchet wrench. - Step 24
Install the new radiator. - Step 25
Attach the coolant hose.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the VW Scirocco II (53B) model
Popular maintenance tutorials for VW Scirocco 2
Complete guides for changing the Radiators on different VW SCIROCCO models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your VW SCIROCCO (53B)
View more
How to fix your car with AUTODOC CLUB
5 mistakes when replacing consumables
TOP 8 mistakes car owners make | AUTODOC tips
How do EGR valves work? | AUTODOC
Most commonly replaced car parts on VW SCIROCCO
Time to replace parts? Get even better deals in our Shop app.

SCAN ME




























