
Disclaimer
How to change engine oil and filter on FORD Escort Mk3 Estate (AWA) – replacement guide
downloads:
0
Views:
3

Recommended replacement interval for the part category Oil filter : 12 month / 15000 km
Important!
This replacement procedure can be used for:
FORD ESCORT III Estate (AWA) 1.6, FORD ESCORT III Estate (AWA) 1.3, FORD ESCORT III Estate (AWA) 1.1, FORD ESCORT III Estate (AWA) 1.1 … View more
The steps may slightly vary depending on the car design.
FORD ESCORT III Estate (AWA) 1.6, FORD ESCORT III Estate (AWA) 1.3, FORD ESCORT III Estate (AWA) 1.1, FORD ESCORT III Estate (AWA) 1.1 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Oil Filter for ESCORT III Estate (AWA) and other FORD models
Oil filter
Alternative products

All-purpose cleaning spray
Oil filter cup socket 76-30F
Impact socket №10
Impact socket №13
Ratchet wrench
Torque wrench
Flat screwdriver
Oil drain pan
Funnel
Fender cover
Replacement: engine oil and filter – FORD ESCORT III Estate (AWA). Tip from AUTODOC:
- Replace the oil filter every time when changing motor oil.
- All work should be done with the engine stopped.
- Wear gloves to prevent contact with hot liquid.
Replacement: engine oil and filter – FORD ESCORT III Estate (AWA). Use the following procedure:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Unscrew the oil filler plug.
- Step 4Lift the car using a jack or place it over an inspection pit.AUTODOC recommends:The vehicle must be on even keel, and if it is at an angle, the drain plug must be at the lowest point.All work should be done with the engine stopped.Step 5Undo the fasteners of the oil pan lower cover.
- Step 6Remove the oil pan cover. Use a drive socket #10. Use a flat screwdriver. Use a ratchet wrench.
- Step 7Put a waste oil container with at least 4 l capacity under the drainage hole.
- Step 8.1Unscrew the drain plug. Use a drive socket #13. Use a ratchet wrench.Step 8.2Drain the used oil.Replacement: engine oil and filter – FORD ESCORT III Estate (AWA). Tip:Caution! The oil may be hot.Wait until the oil has completely drained from the drainage hole.
- Step 9Move the container under the oil filter.
- Step 10Unscrew the oil filter.
- Step 11Prepare a container for the old oil filter. Put the old oil filter in the container.Replacement: engine oil and filter – FORD ESCORT III Estate (AWA). Tip from AUTODOC experts:Move up the container. The oil starts to drain out of the drainage hole immediately after you have removed the oil filter.
- Step 12Clean the oil filter seat. Use all-purpose cleaning spray.
- Step 13Lubricate the rubber seal of the new filter with a little amount of fresh oil.
- Step 14Screw the new filter into its place. Use the 76-30F socket. Use a torque wrench. Tighten it to 18 nm torque.
- Step 15Clean the area of the oil pan drainage hole.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the FORD Escort Mk3 Estate (AWA) model
Popular maintenance tutorials for FORD ESCORT III Estate (AWA)
Complete guides for changing the Oil filters on different FORD ESCORT models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your FORD ESCORT III Estate (AWA)
View more
- DIY car soundproofing | AUTODOC tips
- Top 4 Car Cleaning Products to Protect Your Car's Body | AUTODOC Tips
- How to Polish Your Car Yourself and Save Money on Garage Services | AUTODOC tips
- #DIY Guide: How to Fix a Cracked Windscreen Without a Garage Visit
Most commonly replaced car parts on FORD ESCORT
Time to replace parts? Get even better deals in our Shop app.

SCAN ME