Disclaimer
How to change distributor rotor on VW Transporter T3 Platform/Chassis – replacement guide
downloads:
0
Views:
21
Important!
This replacement procedure can be used for:
VW TRANSPORTER III Platform/Chassis 2.1, VW TRANSPORTER III Platform/Chassis 1.9 Syncro, VW TRANSPORTER III Platform/Chassis 2.1 Syncro, VW TRANSPORTER III Platform/Chassis 2.1 Syncro, VW TRANSPORTER III Platform/Chassis 1.9, VW TRANSPORTER III Platform/Chassis 1.9, VW TRANSPORTER III Platform/Chassis 2.1, VW TRANSPORTER III Platform/Chassis 2.1 i … View more
The steps may slightly vary depending on the car design.
VW TRANSPORTER III Platform/Chassis 2.1, VW TRANSPORTER III Platform/Chassis 1.9 Syncro, VW TRANSPORTER III Platform/Chassis 2.1 Syncro, VW TRANSPORTER III Platform/Chassis 2.1 Syncro, VW TRANSPORTER III Platform/Chassis 1.9, VW TRANSPORTER III Platform/Chassis 1.9, VW TRANSPORTER III Platform/Chassis 2.1, VW TRANSPORTER III Platform/Chassis 2.1 i … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Distributor Rotor for TRANSPORTER III Platform/Chassis and other VW models
Alternative products

Electronic spray
Crow bar
Fender cover
Replacement: distributor rotor – VW TRANSPORTER III Platform/Chassis. AUTODOC experts recommend:
- Follow the terms, recommendations and requirements of the part operation provided by the manufacturer.
- Thoroughly inspect the ignition distributor assembly. Replace any worn parts.
- Please note: all work on the car – VW TRANSPORTER III Platform/Chassis – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Make marks on the distributor cap to indicate the installation order of the spark plug wires. - Step 4
Disconnect the spark plug wires from the distributor cap.Replacement: distributor rotor – VW TRANSPORTER III Platform/Chassis. Tip from AUTODOC:Be careful to avoid damaging spark plug wires. - Step 5
Release the distributor cap clips. Use a crowbar. - Step 6
Remove the distributor cap.AUTODOC recommends:Replacement: distributor rotor – VW TRANSPORTER III Platform/Chassis. Do not use excessive force when removing the part as this may damage it. - Step 7
Remove the ignition distributor rotor.Replacement: distributor rotor – VW TRANSPORTER III Platform/Chassis. Professionals recommend:Do not apply excessive force when removing the part. Otherwise you may damage it. - Step 8
Install a new ignition distributor rotor.AUTODOC recommends:When installing, do not use excessive force to avoid damage to the part. - Step 9
Install the distributor cap.AUTODOC recommends:When installing, do not use excessive force to avoid damage to the part.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the VW Transporter T3 Platform/Chassis model
Popular maintenance tutorials for VW T3 Platform
Complete guides for changing the Ignition distributor rotor on different VW TRANSPORTER models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your VW TRANSPORTER III Platform/Chassis
View more
5 easy car repairs you can do without a garage visit
TOP 5 mistakes when replacing shock absorbers | AUTODOC tips
Can You Hear Your Brakes Squeaking? Learn the Causes and DIY Solutions! | AUTODOC Tips
5 Essential Tips for beginner drivers: Avoid Common Mistakes
Most commonly replaced car parts on VW TRANSPORTER
Time to replace parts? Get even better deals in our Shop app.

SCAN ME
























