
Disclaimer
How to change spark plugs on VW TRANSPORTER III Platform/Chassis – replacement guide
downloads:
0
Views:
14

Recommended replacement interval for the part category Spark plug : 18 month / 30000 km
Important!
This replacement procedure can be used for:
VW TRANSPORTER III Platform/Chassis 2.1, VW TRANSPORTER III Platform/Chassis 1.9, VW TRANSPORTER III Platform/Chassis 1.9, VW TRANSPORTER III Platform/Chassis 2.1 Syncro … View more
The steps may slightly vary depending on the car design.
VW TRANSPORTER III Platform/Chassis 2.1, VW TRANSPORTER III Platform/Chassis 1.9, VW TRANSPORTER III Platform/Chassis 1.9, VW TRANSPORTER III Platform/Chassis 2.1 Syncro … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Spark Plug for TRANSPORTER III Platform/Chassis and other VW models
Spark plug
Alternative products

High-temperature anti-seize lubricant
Torque wrench
Spark plug socket # 21
Ratchet wrench
Long nose pliers
Phillips Screwdriver
Microfibre towel
Fender cover
Replacement: spark plugs – VW TRANSPORTER III Platform/Chassis. Tip from AUTODOC:
- The replacement procedure is the same for all spark plugs.
- All work should be done with the engine stopped.
Replacement: spark plugs – VW TRANSPORTER III Platform/Chassis. Take the following steps:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Unscrew the air filter housing fasteners. Use a Phillips screwdriver.
- Step 4Remove the air filter housing.
- Step 5Cover the throttle body with a microfibre towel to prevent dust and dirt from getting into the system.
- Step 6Disconnect the spark plug wires from the spark plugs. Use long nose pliers.Replacement: spark plugs – VW TRANSPORTER III Platform/Chassis. Tip from AUTODOC:Be careful to avoid damaging spark plug wires.Remember the position of the spark plug wires.
- Step 7Clean dirt, dust and debris from inside the spark plug wells.
- Step 8Unscrew the spark plugs. Use the spark plug socket #21. Use a ratchet wrench.
- Step 9Take out the spark plugs.
- Step 10Apply a thin layer of a special high temperature anti-seize lubricant to the threads of the new spark plugs.
- Step 11Install the new spark plugs into their mounting seats.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the VW Transporter T3 Platform/Chassis model
Popular maintenance tutorials for VW T3 Platform
Complete guides for changing the Engine spark plug on different VW TRANSPORTER models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your VW TRANSPORTER III Platform/Chassis
View more
- DIY rear axle restoration | Drivetrain restoration – Part 2
- What to do if your check engine light is on | AUTODOC tips
- Top 5 possible reasons your car is shaking or vibrating
- How to restore a steering wheel | AUTODOC tips
Most commonly replaced car parts on VW TRANSPORTER
Time to replace parts? Get even better deals in our Shop app.

SCAN ME