Important!
This replacement procedure can be used for:
AUDI TT Coupe (8J3) 2.0 TFSI quattro, AUDI TT Coupe (8J3) 2.0 TTS quattro, AUDI TT Coupe (8J3) 2.0 TDI quattro, AUDI TT Coupe (8J3) 2.0 TTS quattro, AUDI TT Coupe (8J3) 3.2 V6 quattro, AUDI TT Coupe (8J3) 2.0 TFSI quattro View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

Tools
Replacement: CV joint – AUDI TT (8J3). Tools you need:
Wire brush
WD-40 spray
All-purpose cleaning spray
Brake cleaner
Copper grease
Torque wrench
Drive socket # 16
Drive socket # 19
Drive socket # 27
Wheel impact socket #17
Ratchet wrench
Tap wrench
Bush and bearing driver set
Flat screwdriver
Clic-R collar pliers
Hammer
CV joint puller
Crow bar
Hydraulic transmission jack
Wheel chock
Replacement: CV joint – AUDI TT (8J3). Tip from AUTODOC:
  • The CV joint replacement procedure is identical for the left and right CV axles.
  • Replace the CV joints of CV axles in pairs.
  • Please note: all work on the car – AUDI TT (8J3) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Secure the wheels with chocks.
    Step 2
    How to change CV Joint on Audi TT 8J 2006 - free PDF and video manuals
    Loosen the fastener of the driveshaft. Use a drive socket #27. Use a tap wrench.
  2. Step 3
    How to replace AUDI TT Coupe (8J3) 2.0 TFSI 2007 CV Joint - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 4
    Raise the front of the car and secure on supports.
    Step 5
    Audi TT 8J 3.2 V6 quattro 2008 CV Joint replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Important! Hold the wheel while unscrewing the fastening bolts. AUDI TT (8J3)
  4. Step 6
    Changing CV Joint on AUDI TT Coupe (8J3) 1.8 TFSI 2009 by yourself
    Remove the wheel.
  5. Step 7
    How to remove AUDI TT 2.0 TDI quattro 2010 CV Joint - online easy-to-follow instructions
    Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
  6. Step 8
    How to replace CV Joint on AUDI TT Coupe (8J3) 2011: download PDF manuals and video instructions
    Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #19. Use a ratchet wrench.
  7. Step 9
    How hard is it to do yourself: CV Joint replacement on Audi TT 8J 2.0 TFSI quattro 2012 - download illustrated guide
    Remove the stabilizer rod.
  8. Step 10
    Remove the fastening bolt.
    Step 11
    Need to know how to renew CV Joint on AUDI TT 2013? This free workshop manual will help you to do it yourself
    Clean the fasteners connecting the ball joint to the suspension control arm. Use a wire brush. Use WD-40 spray.
  9. Step 12
    Changing of CV Joint on Audi TT 8J 2014 won't be an issue if you follow this illustrated step-by-step guide
    Unscrew the fastener connecting the ball joint to the suspension control arm. Use a drive socket #16. Use a ratchet wrench.
  10. Step 13
    AUDI TT 3.2 V6 quattro CV Joint replacement: online guides and video tutorials
    Disconnect the spherical joint from the arm.
  11. Step 14
    Replacing CV Joint on Audi TT 8J 2007 2.0 TFSI by yourself
    Detach the driveshaft from the steering knuckle.
    Replacement: CV joint – AUDI TT (8J3). Professionals recommend:
    Make sure that the drive shaft is not unloaded (when the car is jacked).
  12. Step 15
    TT Coupe (8J3) 2.0 TDI quattro 2008 CV Joint DIY replacement workshop manual
    Prop up the steering knuckle. Use a hydraulic transmission jack.
  13. Step 16
    How to change CV Joint on AUDI TT Coupe (8J3) 2009 - tips and tricks
    Clean the clamps of the CV joint boot. Use a wire brush. Use WD-40 spray.
  14. Step 17
    Step-by-step recommendations for DIY replacement Audi TT 8J 2010 2.0 TDI quattro CV Joint
    Detach the clamps of the CV joint boot. Use a crowbar.
  15. Step 18
    DIY replacement of CV Joint on AUDI TT Coupe (8J3) 2.0 TTS quattro 2011 is not an issue anymore with our step-by-step tutorial
    Detach the CV joint boot.
  16. Step 19
    How to change CV Joint on Audi TT 8J 2006 - free PDF and video manuals
    Attach the CV joint puller.
  17. Step 20
    How to replace AUDI TT Coupe (8J3) 2.0 TFSI 2007 CV Joint - step-by-step manuals and video guides
    Install and tighten the drive shaft bolt. Use a drive socket #27. Use a ratchet wrench.
  18. Step 21
    Detach the CV joint. Use a CV joint puller.
    Step 22
    Audi TT 8J 3.2 V6 quattro 2008 CV Joint replacement: free workshop manuals
    Unscrew the fastener connecting the drive shaft to the wheel hub.
  19. Step 23
    Changing CV Joint on AUDI TT Coupe (8J3) 1.8 TFSI 2009 by yourself
    Remove the fastening bolt.
  20. Step 24
    How to remove AUDI TT 2.0 TDI quattro 2010 CV Joint - online easy-to-follow instructions
    Remove the CV joint together with its boot.
  21. Step 25
    How to replace CV Joint on AUDI TT Coupe (8J3) 2011: download PDF manuals and video instructions
    Clean the CV joint mounting seat. Use all-purpose cleaning spray.
  22. Step 26
    How hard is it to do yourself: CV Joint replacement on Audi TT 8J 2.0 TFSI quattro 2012 - download illustrated guide
    Remove the CV joint circlip. Use a flat screwdriver.
  23. Step 27
    Need to know how to renew CV Joint on AUDI TT 2013? This free workshop manual will help you to do it yourself
    Clean the splines of the drive shaft CV joint. Use a wire brush. Use all-purpose cleaning spray.
  24. Step 28
    Changing of CV Joint on Audi TT 8J 2014 won't be an issue if you follow this illustrated step-by-step guide
    Install the CV joint boot on the CV axle.
  25. Step 29
    AUDI TT 3.2 V6 quattro CV Joint replacement: online guides and video tutorials
    Install the CV joint circlip.
  26. Step 30
    Replacing CV Joint on Audi TT 8J 2007 2.0 TFSI by yourself
    Pack the CV joint with the grease supplied in the kit.
  27. Step 31
    TT Coupe (8J3) 2.0 TDI quattro 2008 CV Joint DIY replacement workshop manual
    Move the inner race of the new CV joint from side to side to get it ready to work.
  28. Step 32
    How to change CV Joint on AUDI TT Coupe (8J3) 2009 - tips and tricks
    Install the new CV joint. Use a bush and bearing driver set. Use a hammer.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the AUDI TT Coupe (8J3) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
AUDI TT Coupe (8J3) CV Joint replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
Autodoc CLUB App icon
DIY AUDI TT Coupe (8J3) CV Joint replacement - online guide
Tips & tricks for your AUDI TT Coupe (8J3)
View more
  • How to change Constant velocity joint on AUDI TT Coupe (8J3) 2.0 TTS quattro - replacement tricks
    Initial Car Inspection: What to Check Before You Buy | AUTODOC tips
  • Changing Joint drive shaft Audi TT 8J 2.0 TFSI - Replacement Tips
    How to Order Car Parts Online: Avoid These 5 Common Pitfalls
  • Maintenance Hacks - AUDI TT Coupe (8J3) 3.2 V6 quattro Cv joint kit replacement guide
    Easy Steps to Paint Brake Calipers Without Special Skills or High Costs | AUTODOC tips
  • Replace Joint kit drive shaft on Audi TT 8J - free video tips
    BMW E30 Turbo Suspension Swap: Boost Your Handling | AUTODOC project

Professional manuals for the most common AUDI models