Disclaimer
How to change brake drum on FIAT BRAVA (182) – replacement guide
downloads:
1
Views:
15
Recommended replacement interval for the part category Brake drum : 100000 km
Important!
This replacement procedure can be used for:
FIAT BRAVA (182) 1.2 16V 80, FIAT BRAVA (182) 1.2 16V 80, FIAT BRAVA (182) 1.9 D, FIAT BRAVA (182) 1.4 12 V (182.BA), FIAT BRAVA (182) 1.4 (182.BG) … View more
The steps may slightly vary depending on the car design.
FIAT BRAVA (182) 1.2 16V 80, FIAT BRAVA (182) 1.2 16V 80, FIAT BRAVA (182) 1.9 D, FIAT BRAVA (182) 1.4 12 V (182.BA), FIAT BRAVA (182) 1.4 (182.BG) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Brake Drum for BRAVA (182) and other FIAT models
Alternative products

Wire brush
Copper grease
Drive socket # 12
Wheel impact socket #17
Ratchet wrench
Torque wrench
Hammer
Flat screwdriver
Wheel chock
Replacement: brake drum – FIAT BRAVA (182). AUTODOC experts recommend:
- Replace the brake drums on FIAT BRAVA (182) in pair for the rear axle. Disregarding the parts state. It ensures even braking.
- The replacement procedure is identical for the right and left brake drums on the same axle.
- When replacing the brake drums, be sure to also change the brake shoes.
- Warning! Shut down the engine before starting any work – FIAT BRAVA (182).
Carry out replacement in the following order:
- Step 1Open the bonnet.Step 2
Unscrew the brake fluid reservoir cap. Secure the wheels with chocks. - Step 3Loosen the wheel mounting bolts. Use wheel impact socket #17.Step 4Raise the rear of the car and secure on supports.Step 5
Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. FIAT BRAVA (182) - Step 6
Remove the wheel. - Step 7Fully lower the parking brake lever.Step 8
Unscrew the brake drum fastening. - Step 9
Use a drive socket #12. Use a ratchet wrench. - Step 10
Remove the brake drum. - Step 11
Remove the hub bearing protection cap. Use a flat screwdriver. Use a hammer.Replacement: brake drum – FIAT BRAVA (182). AUTODOC recommends:Some cars are not equipped with wheel hub caps.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the FIAT Brava Hatchback (182) model
Popular maintenance tutorials for Fiat Brava 182
Complete guides for changing the Drum brakes on different FIAT BRAVA models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your FIAT BRAVA (182)
View more
7 signs of faulty fuel injectors | AUTODOC tips
Deep interior cleaning | Car transformation by detailing
How to inspect and troubleshoot your car heater when it’s not working
The Fast and Easy Way to Fix a Broken Wheel Stud | AUTODOC tips
Most commonly replaced car parts on FIAT BRAVA
ОЕ number
Time to replace parts? Get even better deals in our Shop app.

SCAN ME
























