Struggling with T-Cut Scratch Remover on Metallic Paint??? ROVER 75 (RJ) (02.1999 - 05.2005)

Your experience with T-Cut leaving a dull finish on your 2003 Rover 75’s metallic paint is not uncommon. T-Cut is a rubbing compound designed to remove a very thin layer of the clear coat to erase light surface scratches and oxidation, but it can sometimes leave a haze or dullness that requires further polishing to restore shine.

Tips to Improve Results with T-Cut on Metallic Paint:
- Use the correct T-Cut product: For metallic paint, it’s best to use T-Cut Metallic Colour Restorer, which is specially formulated for metallic and pearlescent finishes. It removes oxidation and minor scratches while restoring colour and shine more effectively than the original formula.
- Proper application: Apply T-Cut sparingly on a clean, dry surface with a soft, lint-free cloth. Work in small sections using circular motions, then allow it to haze before buffing off with a dry microfiber cloth.
- Follow up with polish and wax: T-Cut is abrasive, so after use, you should polish the area with a finer polish to remove any haze and then apply a good quality wax or sealant to protect and enhance the shine.
- Avoid overuse: Excessive rubbing or using too much product can dull the finish. Less is more with T-Cut.

Alternative Products to Consider:
- Meguiar’s Deep Crystal Paint Cleaner or similar clay bar/polish combos can gently remove surface contaminants and improve shine without harsh abrasion.
- Autoglym Scratch Removal Complete Kit offers a balanced cut and gloss finish, safe for metallic paints and may provide a better finish with less dullness.
- T-Cut Rapid Scratch Remover is a gentler option that still removes swirls and light scratches and is safe for metallic paint.

* Your dull finish is likely due to T-Cut’s abrasive nature and possibly using the original formula rather than the metallic-specific version.
* Switch to T-Cut Metallic Colour Restorer for better results on your Rover’s paint.
* Always follow T-Cut with a polish and wax to restore gloss.
* Consider gentler polish products or complete scratch removal kits designed for metallic finishes if you want a less abrasive approach.

This approach should help you achieve a smooth, shiny finish without the dullness you’ve encountered.