When to replace the Wheel Cylinder on your VW POLO
Recommended replacement interval for the part category Wheel Brake Cylinder : 60000 km
Important!
This replacement procedure can be used for:
VW Polo Coupe (86C, 80) 1.0, VW Polo Coupe (86C, 80) 1.1, VW Polo Coupe (86C, 80) 1.3 View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

Tools
Replacement: wheel cylinder – VW POLO Coupe (86C, 80). Tools you'll need:
Wire brush
WD-40 spray
Copper grease
Combination spanner #7
Combination spanner #11
Torx bit T30
Wheel impact socket #17
Ratchet wrench
Torque wrench
Flat Screwdriver
Phillips screwdriver
Wheel chock
Replacement: wheel cylinder – VW POLO Coupe (86C, 80). Tip from AUTODOC:
  • Replace the wheel brake cylinders of the rear drum brakes in pairs.
  • The replacement procedure is identical for the right and left wheel brake cylinders of the rear drum brakes.
  • All work should be done with the engine stopped.
Replacement: wheel cylinder – VW POLO Coupe (86C, 80). Recommended sequence of steps:
  1. Step 1
    How to change Wheel Cylinder on VW Polo 86c Coupe 1981 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace VW Polo Coupe (86C, 80) 1.3 G40 1982 Wheel Cylinder - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Raise the rear of the car and secure on supports.
    Step 4
    VW Polo 86c Coupe 1.3 Cat 1983 Wheel Cylinder replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. VW POLO Coupe (86C, 80)
  4. Step 5
    Changing Wheel Cylinder on VW Polo Coupe (86C, 80) 1.0 1984 by yourself
    Remove the wheel.
  5. Step 6
    Clean the brake drum fasteners. Use a wire brush. Use WD-40 spray.
    Step 7
    How to remove VW POLO 1.3 1985 Wheel Cylinder - online easy-to-follow instructions
    Unscrew the brake drum fastening. Use a Phillips screwdriver.
  6. Step 8
    How to replace Wheel Cylinder on VW Polo Coupe (86C, 80) 1986: download PDF manuals and video instructions
    Remove the brake drum.
    Replacement: wheel cylinder – VW POLO Coupe (86C, 80). Tip from AUTODOC experts:
    Examine the brake drum. Replace it if necessary.
  7. Step 9
    How hard is it to do yourself: Wheel Cylinder replacement on VW Polo 86c Coupe 1.3 G40 1987 - download illustrated guide
    Disconnect the hydraulic line from the wheel cylinder back. Use a combination spanner #11.
    Replacement: wheel cylinder – VW POLO Coupe (86C, 80). Tip from AUTODOC:
    Immediately plug the brake line open end to prevent fluid leakage and ingress of dirt into the hydraulic system.
  8. Step 10
    Need to know how to renew Wheel Cylinder on VW POLO 1988? This free workshop manual will help you to do it yourself
    Unscrew the brake cylinder fastening bolt. Use Torx T30. Use a ratchet wrench.
  9. Step 11
    Changing of Wheel Cylinder on VW Polo 86c Coupe 1989 won't be an issue if you follow this illustrated step-by-step guide
    Remove the brake cylinder from the backplate. Use a flat screwdriver.
  10. Step 12
    Clean the brake drum. Use a wire brush. Use WD-40 spray.
    Step 13
    Clean the brake pipe attachment spot  and the brake drum fastening bolts on :maker :model.
    Step 14
    VW POLO 1.0 Cat Wheel Cylinder replacement: online guides and video tutorials
    Install a new brake cylinder.
  11. Step 15
    Replacing Wheel Cylinder on VW Polo 86c Coupe 1991 1.3 G40 by yourself
    Screw the brake cylinder fastening bolts. Use Torx T30. Use a torque wrench. Tighten it to 8 nm torque.
  12. Step 16
    Polo Coupe (86C, 80) 1.3 1992 Wheel Cylinder DIY replacement workshop manual
    Connect the hydraulic line to the wheel cylinder back. Use a combination spanner #11. Use a torque wrench. Tighten it to 14 nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the VW Polo II Coupe (86C, 80) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
VW Polo Coupe (86C, 80) Wheel Cylinder replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY VW Polo Coupe (86C, 80) Wheel Cylinder replacement - online guide
Tips & tricks for your VW Polo Coupe (86C, 80)
View more
  • How to change Brake wheel cylinder on VW Polo Coupe (86C, 80) 1.0 Cat - replacement tricks
    Things you should never do with an automatic transmission | AUTODOC tips
  • Changing Brake cylinder VW Polo 86c Coupe 1.3 G40 - Replacement Tips
    TOP 6 WD-40 lifehacks | AUTODOC tips
  • Maintenance Hacks - VW Polo Coupe (86C, 80) 1.3 Cat Brake wheel cylinder replacement guide
    What causes engine misfire? | AUTODOC
  • Replace Brake cylinder on VW Polo 86c Coupe - free video tips
    How to repair a bumper yourself | AUTODOC tips