When to replace the Wheel Cylinder on your VW POLO
Recommended replacement interval for the part category Wheel Brake Cylinder : 60000 km
Important!
This replacement procedure can be used for:
VW Polo Hatchback (6N1) 55 1.3, VW Polo Hatchback (6N1) 75 1.6, VW Polo Hatchback (6N1) 45 1.0, VW Polo Hatchback (6N1) 64 1.9 D, VW Polo Hatchback (6N1) 55 1.4, VW Polo Hatchback (6N1) 60 1.4, VW Polo Hatchback (6N1) 100 1.4 16V, VW Polo Hatchback (6N1) 50 1.0, VW Polo Hatchback (6N1) 60 1.7 SDI, VW Polo Hatchback (6N1) 120 1.6 16V GTI, VW Polo Hatchback (6N1) 64 1.9 SDI, VW Polo Hatchback (6N1) 1.7 SDI View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Wheel Cylinder for Polo Hatchback (6N1) and other VW models
Alternative products
How to change Wheel Brake Cylinder on Polo 6n1 1.4 – step-by-step instructions for straightforward car repair Wheel Brake Cylinder
Tools
Replacement: wheel cylinder – VW POLO (6N1). Tools you'll need:
Wire brush
WD-40 spray
Copper grease
Combination spanner #7
Combination spanner #11
Torx bit T30
Wheel impact socket #17
Ratchet wrench
Torque wrench
Flat Screwdriver
Phillips screwdriver
Wheel chock
Replacement: wheel cylinder – VW POLO (6N1). Tip from AUTODOC:
  • Replace the wheel brake cylinders of the rear drum brakes in pairs.
  • The replacement procedure is identical for the right and left wheel brake cylinders of the rear drum brakes.
  • All work should be done with the engine stopped.
Replacement: wheel cylinder – VW POLO (6N1). Recommended sequence of steps:
  1. Step 1
    How to change Wheel Cylinder on Polo 6n1 1994 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace VW Polo Hatchback (6N1) 1.4 1995 Wheel Cylinder - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Raise the rear of the car and secure on supports.
    Step 4
    Polo 6n1 75 1.6 1996 Wheel Cylinder replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. VW POLO (6N1)
  4. Step 5
    Changing Wheel Cylinder on VW Polo Hatchback (6N1) 1.9 D 1997 by yourself
    Remove the wheel.
  5. Step 6
    Clean the brake drum fasteners. Use a wire brush. Use WD-40 spray.
    Step 7
    How to remove VW POLO 55 1.3 1998 Wheel Cylinder - online easy-to-follow instructions
    Unscrew the brake drum fastening. Use a Phillips screwdriver.
  6. Step 8
    How to replace Wheel Cylinder on VW Polo Hatchback (6N1) 1999: download PDF manuals and video instructions
    Remove the brake drum.
    Replacement: wheel cylinder – VW POLO (6N1). Tip from AUTODOC experts:
    Examine the brake drum. Replace it if necessary.
  7. Step 9
    How hard is it to do yourself: Wheel Cylinder replacement on Polo 6n1 1.9 SDI 1994 - download illustrated guide
    Disconnect the hydraulic line from the wheel cylinder back. Use a combination spanner #11.
    Replacement: wheel cylinder – VW POLO (6N1). Tip from AUTODOC:
    Immediately plug the brake line open end to prevent fluid leakage and ingress of dirt into the hydraulic system.
  8. Step 10
    Need to know how to renew Wheel Cylinder on VW POLO 1995? This free workshop manual will help you to do it yourself
    Unscrew the brake cylinder fastening bolt. Use Torx T30. Use a ratchet wrench.
  9. Step 11
    Changing of Wheel Cylinder on Polo 6n1 1996 won't be an issue if you follow this illustrated step-by-step guide
    Remove the brake cylinder from the backplate. Use a flat screwdriver.
  10. Step 12
    Clean the brake drum. Use a wire brush. Use WD-40 spray.
    Step 13
    Clean the brake pipe attachment spot  and the brake drum fastening bolts on :maker :model.
    Step 14
    VW POLO 1.4 Wheel Cylinder replacement: online guides and video tutorials
    Install a new brake cylinder.
  11. Step 15
    Replacing Wheel Cylinder on Polo 6n1 1998 1.4 by yourself
    Screw the brake cylinder fastening bolts. Use Torx T30. Use a torque wrench. Tighten it to 8 nm torque.
  12. Step 16
    Polo Hatchback (6N1) 55 1.3 1999 Wheel Cylinder DIY replacement workshop manual
    Connect the hydraulic line to the wheel cylinder back. Use a combination spanner #11. Use a torque wrench. Tighten it to 14 nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the VW Polo III Hatchback (6N1) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY VW Polo Hatchback (6N1) Wheel Cylinder replacement - online guide
Tips & tricks for your VW Polo Hatchback (6N1)
View more
  • How to change Brake wheel cylinder on VW Polo Hatchback (6N1) 1.0 - replacement tricks
    7 signs of faulty fuel injectors | AUTODOC tips
  • Changing Brake cylinder Polo 6n1 1.4 - Replacement Tips
    Regain Your Confidence on the Road: Easy Headlight Restoration Tips
  • Maintenance Hacks - VW Polo Hatchback (6N1) 75 1.6 Brake wheel cylinder replacement guide
    How to unlock your car without a key | AUTODOC tips
  • Replace Brake cylinder on Polo 6n1 - free video tips
    How to Safely Wash Your Car in Winter Without Damage | AUTODOC tips
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
VW Polo Hatchback (6N1) Wheel Cylinder replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME