Disclaimer
How to change spark plugs on VW Polo Coupe (86C, 80) – replacement guide
downloads:
0
Views:
63
Recommended replacement interval for the part category Spark plug : 30000 km
Important!
This replacement procedure can be used for:
VW Polo Coupe (86C, 80) 1.0 Cat, VW Polo Coupe (86C, 80) 1.3 Cat, VW Polo Coupe (86C, 80) 1.3 Cat, VW Polo Coupe (86C, 80) 1.3, VW Polo Coupe (86C, 80) 1.0, VW Polo Coupe (86C, 80) 1.3, VW Polo Coupe (86C, 80) 1.3 … View more
The steps may slightly vary depending on the car design.
VW Polo Coupe (86C, 80) 1.0 Cat, VW Polo Coupe (86C, 80) 1.3 Cat, VW Polo Coupe (86C, 80) 1.3 Cat, VW Polo Coupe (86C, 80) 1.3, VW Polo Coupe (86C, 80) 1.0, VW Polo Coupe (86C, 80) 1.3, VW Polo Coupe (86C, 80) 1.3 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Spark Plug for Polo Coupe (86C, 80) and other VW models
Alternative products

High-temperature anti-seize lubricant
Torque wrench
Spark plug socket # 21
Ratchet wrench
Long nose pliers
Phillips Screwdriver
Microfibre towel
Fender cover
Replacement: spark plugs – VW POLO Coupe (86C, 80). Tip from AUTODOC:
- The replacement procedure is the same for all spark plugs.
- All work should be done with the engine stopped.
Replacement: spark plugs – VW POLO Coupe (86C, 80). Take the following steps:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Unscrew the air filter housing fasteners. Use a Phillips screwdriver. - Step 4
Remove the air filter housing. - Step 5
Cover the throttle body with a microfibre towel to prevent dust and dirt from getting into the system. - Step 6
Disconnect the spark plug wires from the spark plugs. Use long nose pliers.Replacement: spark plugs – VW POLO Coupe (86C, 80). Tip from AUTODOC:Be careful to avoid damaging spark plug wires.Remember the position of the spark plug wires. - Step 7
Clean dirt, dust and debris from inside the spark plug wells. - Step 8
Unscrew the spark plugs. Use the spark plug socket #21. Use a ratchet wrench. - Step 9
Take out the spark plugs. - Step 10
Apply a thin layer of a special high temperature anti-seize lubricant to the threads of the new spark plugs. - Step 11
Install the new spark plugs into their mounting seats.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the VW Polo II Coupe (86C, 80) model
Popular maintenance tutorials for VW Polo 86c Coupe
Complete guides for changing the Engine spark plug on different VW POLO models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your VW Polo Coupe (86C, 80)
View more
5 mistakes when replacing consumables
How to make an injector test bench yourself
How to Prevent Premature Wear on Your Car Boot Damper | AUTODOC
5 causes of turbocharger failure and how to avoid them
Most commonly replaced car parts on VW POLO
Time to replace parts? Get even better deals in our Shop app.

SCAN ME


























