Important!
This replacement procedure can be used for:
SEAT Altea XL (5P5, 5P8) 1.6, SEAT Altea XL (5P5, 5P8) 2.0 FSI, SEAT Altea XL (5P5, 5P8) 1.9 TDI, SEAT Altea XL (5P5, 5P8) 2.0 TDI 16V, SEAT Altea XL (5P5, 5P8) 2.0 TDI, SEAT Altea XL (5P5, 5P8) 2.0 TDI, SEAT Altea XL (5P5, 5P8) 1.8 TFSI, SEAT Altea XL (5P5, 5P8) 1.4 TSI, SEAT Altea XL (5P5, 5P8) 2.0 TFSI 4x4, SEAT Altea XL (5P5, 5P8) 2.0 TDI 4x4, SEAT Altea XL (5P5, 5P8) 1.4 16V, SEAT Altea XL (5P5, 5P8) 2.0 TDI, SEAT Altea XL (5P5, 5P8) 2.0 TDI 4x4, SEAT Altea XL (5P5, 5P8) 1.6 Multifuel, SEAT Altea XL (5P5, 5P8) 1.6 TDI, SEAT Altea XL (5P5, 5P8) 1.2 TSI, SEAT Altea XL (5P5, 5P8) 1.9 TDI, SEAT Altea XL (5P5, 5P8) 1.6 LPG, SEAT Altea XL (5P5, 5P8) 2.0 TFSI 4x4, SEAT Altea XL (5P5, 5P8) 1.6 TDI View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Track Rod End for Altea XL (5P5, 5P8) and other SEAT models
Alternative products
How to change Track rod end on Seat Altea XL 1.9 TDI – step-by-step instructions for straightforward car repair Track rod end
Tools
Replacement: track rod end – SEAT ALTEA XL (5P5, 5P8). List of the tools you'll need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #23
Combination spanner #24
Drive socket # 18
Drive socket # 19
Wheel impact socket #17
Ratchet wrench
Torque wrench
Tap wrench
Vernier caliper
Ball joint puller
Wheel chock
Replacement: track rod end – SEAT ALTEA XL (5P5, 5P8). AUTODOC recommends:
  • Replace tie rod ends in pairs.
  • The replacement procedure is identical for the right and left tie rod ends.
  • All work should be done with the engine stopped.
Replacement: track rod end – SEAT ALTEA XL (5P5, 5P8). Take the following steps:
  1. Step 1
    How to change Track Rod End on Seat Altea XL 2006 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace SEAT Altea XL (5P5, 5P8) 1.9 TDI 2007 Track Rod End - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    Seat Altea XL 1.6 TDI 2008 Track Rod End replacement: free workshop manuals
    Unscrew the wheel bolts.
    Replacement: track rod end – SEAT ALTEA XL (5P5, 5P8). Tip:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  4. Step 5
    Changing Track Rod End on SEAT Altea XL (5P5, 5P8) 1.6 2009 by yourself
    Remove the wheel.
  5. Step 6
    How to remove SEAT ALTEA 2.0 TDI 2010 Track Rod End - online easy-to-follow instructions
    Clean the fastener connecting the tie rod end to the steering knuckle. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Track Rod End on SEAT Altea XL (5P5, 5P8) 2011: download PDF manuals and video instructions
    Unscrew the end fastening nut to the steering knuckle. Use a drive socket #18. Use a tap wrench.
  7. Step 8
    How hard is it to do yourself: Track Rod End replacement on Seat Altea XL 2.0 TDI 4x4 2012 - download illustrated guide
    When deinstalling, mark or measure the precise position of the ball joint on the track rod, or count the number of turns in order to prevent misalignment afterward. Use a vernier caliper.
  8. Step 9
    Need to know how to renew Track Rod End on SEAT ALTEA 2013? This free workshop manual will help you to do it yourself
    Loosen the lock nut securing the tie rod end to the tie rod. Use a combination spanner #23. Use a combination spanner #24.
  9. Step 10
    Changing of Track Rod End on Seat Altea XL 2014 won't be an issue if you follow this illustrated step-by-step guide
    Disconnect the tie rod end from the steering knuckle. Use a ball joint puller.
  10. Step 11
    SEAT ALTEA 1.2 TSI Track Rod End replacement: online guides and video tutorials
    Screw the end out of the tie rod.
  11. Step 12
    Replacing Track Rod End on Seat Altea XL 2006 1.9 TDI by yourself
    Clean the mounting seats of the tie rod end. Use a wire brush. Use WD-40 spray.
  12. Step 13
    Altea XL (5P5, 5P8) 2.0 TDI 2007 Track Rod End DIY replacement workshop manual
    Screw on a new tie rod end.
    Replacement: track rod end – SEAT ALTEA XL (5P5, 5P8). AUTODOC experts recommend:
    While installing the steering rod end remember to make the same number of turns or to leave the same length of thread showing as per your measurements.
  13. Step 14
    How to change Track Rod End on SEAT Altea XL (5P5, 5P8) 2008 - tips and tricks
    Connect the tie rod end to the steering knuckle.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the SEAT Altea XL (5P5, 5P8) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY SEAT Altea XL (5P5, 5P8) Track Rod End replacement - online guide
Tips & tricks for your SEAT Altea XL (5P5, 5P8)
View more
  • How to change Tie rod end on SEAT Altea XL (5P5, 5P8) 2.0 TDI 16V - replacement tricks
    Discover the 4 Key Reasons Your CHECK ENGINE Light Could Be On | AUTODOC Tips
  • Changing Outer tie rod Seat Altea XL 1.9 TDI - Replacement Tips
    How to Swap an M50 Engine in a BMW E30 Turbo | AUTODOC Project
  • Maintenance Hacks - SEAT Altea XL (5P5, 5P8) 1.6 TDI Track rod end ball joint replacement guide
    5 Essential Tips for beginner drivers: Avoid Common Mistakes
  • Replace Outer tie rod end on Seat Altea XL - free video tips
    Revitalize Your Car Interior: DIY Steering Wheel Cover with AUTODOC Tips
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
SEAT Altea XL (5P5, 5P8) Track Rod End replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME