Important!
This replacement procedure can be used for:
SEAT Altea XL (5P5, 5P8) 1.6, SEAT Altea XL (5P5, 5P8) 2.0 FSI, SEAT Altea XL (5P5, 5P8) 1.9 TDI, SEAT Altea XL (5P5, 5P8) 2.0 TDI 16V, SEAT Altea XL (5P5, 5P8) 2.0 TDI, SEAT Altea XL (5P5, 5P8) 2.0 TDI, SEAT Altea XL (5P5, 5P8) 1.8 TFSI, SEAT Altea XL (5P5, 5P8) 1.4 TSI, SEAT Altea XL (5P5, 5P8) 2.0 TFSI 4x4, SEAT Altea XL (5P5, 5P8) 2.0 TDI 4x4, SEAT Altea XL (5P5, 5P8) 1.4 16V, SEAT Altea XL (5P5, 5P8) 2.0 TDI, SEAT Altea XL (5P5, 5P8) 2.0 TDI 4x4, SEAT Altea XL (5P5, 5P8) 1.6 Multifuel, SEAT Altea XL (5P5, 5P8) 1.6 TDI, SEAT Altea XL (5P5, 5P8) 1.2 TSI, SEAT Altea XL (5P5, 5P8) 1.9 TDI, SEAT Altea XL (5P5, 5P8) 1.6 LPG, SEAT Altea XL (5P5, 5P8) 2.0 TFSI 4x4, SEAT Altea XL (5P5, 5P8) 1.6 TDI, SEAT Altea XL (5P5, 5P8) 2.0 TFSI, SEAT Altea XL (5P5, 5P8) 2.0 TDI 16V 4x4 View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Anti Roll Bar Links for Altea XL (5P5, 5P8) and other SEAT models
Alternative products
How to change Anti-roll bar link on Seat Altea XL 1.9 TDI – step-by-step instructions for straightforward car repair Anti-roll bar link
Tools
Replacement: anti roll bar links – SEAT ALTEA XL (5P5, 5P8). Tools you might need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Torque wrench
Combination spanner #16
Drive socket # 16
XZN socket bit # 6
Wheel impact socket #17
Ratchet wrench
Hydraulic transmission jack
Wheel chock
AUTODOC recommends:
  • Replace the stabiliser links on SEAT ALTEA XL (5P5, 5P8) in pairs.
  • The replacement procedure is identical for both stabiliser links on the same axle.
  • Please note: all work on the car – SEAT ALTEA XL (5P5, 5P8) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Secure the wheels with chocks.
    Step 2
    How to change Anti Roll Bar Links on Seat Altea XL 2006 - free PDF and video manuals
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  2. Step 3
    Raise the rear of the car and secure on supports.
    Step 4
    How to replace SEAT Altea XL (5P5, 5P8) 1.9 TDI 2007 Anti Roll Bar Links - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. SEAT ALTEA XL (5P5, 5P8)
  3. Step 5
    Seat Altea XL 1.6 TDI 2008 Anti Roll Bar Links replacement: free workshop manuals
    Remove the wheel.
  4. Step 6
    Changing Anti Roll Bar Links on SEAT Altea XL (5P5, 5P8) 1.6 2009 by yourself
    Clean all joints of the stabiliser link. Use a wire brush. Use WD-40 spray.
  5. Step 7
    How to remove SEAT ALTEA 2.0 TDI 2010 Anti Roll Bar Links - online easy-to-follow instructions
    Unscrew the fastener connecting the stabilizer bar with the control arm. Use a drive socket #16. Use a ratchet wrench.
  6. Step 8
    How to replace Anti Roll Bar Links on SEAT Altea XL (5P5, 5P8) 2011: download PDF manuals and video instructions
    Clean all joints of the stabiliser link. Use a wire brush. Use WD-40 spray.
  7. Step 9
    How hard is it to do yourself: Anti Roll Bar Links replacement on Seat Altea XL 2.0 TDI 4x4 2012 - download illustrated guide
    Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #16. Use XZN #6. Use a ratchet wrench.
  8. Step 10
    Need to know how to renew Anti Roll Bar Links on SEAT ALTEA 2013? This free workshop manual will help you to do it yourself
    Support the arm. Use a hydraulic transmission jack.
  9. Step 11
    Changing of Anti Roll Bar Links on Seat Altea XL 2014 won't be an issue if you follow this illustrated step-by-step guide
    Remove the stabilizer rod.
  10. Step 12
    SEAT ALTEA 1.2 TSI Anti Roll Bar Links replacement: online guides and video tutorials
    Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
  11. Step 13
    Replacing Anti Roll Bar Links on Seat Altea XL 2006 1.9 TDI by yourself
    Ιnstall the transverse stabilizer link.
  12. Step 14
    Altea XL (5P5, 5P8) 2.0 TDI 2007 Anti Roll Bar Links DIY replacement workshop manual
    Tighten the stabiliser link fastener. Use a combination spanner #16. Use XZN #6. Use a ratchet wrench.
  13. Step 15
    How to change Anti Roll Bar Links on SEAT Altea XL (5P5, 5P8) 2008 - tips and tricks
    Raise the hydraulic transmission jack by 10-15 cm.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the SEAT Altea XL (5P5, 5P8) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY SEAT Altea XL (5P5, 5P8) Anti Roll Bar Links replacement - online guide
Tips & tricks for your SEAT Altea XL (5P5, 5P8)
View more
  • How to change Drop links on SEAT Altea XL (5P5, 5P8) 2.0 TDI 16V - replacement tricks
    What to do if your check engine light is on | AUTODOC tips
  • Changing Stabilizer link Seat Altea XL 1.9 TDI - Replacement Tips
    How to Polish Your Car Yourself and Save Money on Garage Services | AUTODOC tips
  • Maintenance Hacks - SEAT Altea XL (5P5, 5P8) 1.6 TDI Sway bar link replacement guide
    How to replace a timing chain yourself
  • Replace Drop link on Seat Altea XL - free video tips
    Transform Your Old Engine Valve Cover: Quick Polishing Tips for a Shiny Finish | AUTODOC Tips
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
SEAT Altea XL (5P5, 5P8) Anti Roll Bar Links replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME