Important!
This replacement procedure can be used for:
PEUGEOT 306 Hatchback (7A, 7C, N3, N5) 1.9 D, PEUGEOT 306 Hatchback (7A, 7C, N3, N5) 1.9 DT, PEUGEOT 306 Hatchback (7A, 7C, N3, N5) 1.1, PEUGEOT 306 Hatchback (7A, 7C, N3, N5) 1.4, PEUGEOT 306 Hatchback (7A, 7C, N3, N5) 1.6, PEUGEOT 306 Hatchback (7A, 7C, N3, N5) 1.8, PEUGEOT 306 Hatchback (7A, 7C, N3, N5) 2.0 XSi, PEUGEOT 306 Hatchback (7A, 7C, N3, N5) 2.0 S16, PEUGEOT 306 Hatchback (7A, 7C, N3, N5) 2.0 S16, PEUGEOT 306 Hatchback (7A, 7C, N3, N5) 1.9 D, PEUGEOT 306 Hatchback (7A, 7C, N3, N5) 2.0 S16, PEUGEOT 306 Hatchback (7A, 7C, N3, N5) 1.8 16V, PEUGEOT 306 Hatchback (7A, 7C, N3, N5) 2.0 16V, PEUGEOT 306 Hatchback (7A, 7C, N3, N5) 1.9 D, PEUGEOT 306 Hatchback (7A, 7C, N3, N5) 1.9 D, PEUGEOT 306 Hatchback (7A, 7C, N3, N5) 2.0 HDI 90, PEUGEOT 306 Hatchback (7A, 7C, N3, N5) 1.8 D, PEUGEOT 306 Hatchback (7A, 7C, N3, N5) 1.6, PEUGEOT 306 Hatchback (7A, 7C, N3, N5) 1.6, PEUGEOT 306 Hatchback (7A, 7C, N3, N5) 1.9 D View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Track Rod End for 306 Hatchback (7A, 7C, N3, N5) and other PEUGEOT models
Tools
Replacement: track rod end – PEUGEOT 306 Hatchback (7A, 7C, N3, N5). Tools you might need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Torque wrench
Combination spanner #16
Combination spanner #22
Drive socket # 16
Drive socket # 17
Wheel impact socket #17
Ratchet wrench
Tap wrench
Ball joint puller
Vernier caliper
Wheel chock
Replacement: track rod end – PEUGEOT 306 Hatchback (7A, 7C, N3, N5). AUTODOC experts recommend:
  • Replace tie rod ends in pairs.
  • The replacement procedure is identical for the right and left tie rod ends.
  • All work should be done with the engine stopped.
Replacement: track rod end – PEUGEOT 306 Hatchback (7A, 7C, N3, N5). Take the following steps:
  1. Step 1
    How to change Track Rod End on Peugeot 306 7a 1993 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace PEUGEOT 306 Hatchback (7A, 7C, N3, N5) 2.0 HDI 90 1994 Track Rod End - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    Peugeot 306 7a 1.4 1995 Track Rod End replacement: free workshop manuals
    Unscrew the wheel bolts.
    Replacement: track rod end – PEUGEOT 306 Hatchback (7A, 7C, N3, N5). Tip from AUTODOC experts:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  4. Step 5
    Changing Track Rod End on PEUGEOT 306 Hatchback (7A, 7C, N3, N5) 1.6 1996 by yourself
    Remove the wheel.
  5. Step 6
    How to remove PEUGEOT 306 1.9 D 1997 Track Rod End - online easy-to-follow instructions
    Clean the fastener connecting the tie rod end to the steering knuckle. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Track Rod End on PEUGEOT 306 Hatchback (7A, 7C, N3, N5) 1998: download PDF manuals and video instructions
    When deinstalling, mark or measure the precise position of the ball joint on the track rod, or count the number of turns in order to prevent misalignment afterward. Use a vernier caliper.
  7. Step 8
    How hard is it to do yourself: Track Rod End replacement on Peugeot 306 7a 2.0 S16 1999 - download illustrated guide
    Loosen the lock nut securing the tie rod end to the tie rod. Use a combination spanner #16. Use a combination spanner #22.
  8. Step 9
    Need to know how to renew Track Rod End on PEUGEOT 306 2000? This free workshop manual will help you to do it yourself
    Unscrew the end fastening nut to the steering knuckle. Use a drive socket #16. Use a tap wrench.
  9. Step 10
    Changing of Track Rod End on Peugeot 306 7a 2001 won't be an issue if you follow this illustrated step-by-step guide
    Disconnect the tie rod end from the steering knuckle. Use a ball joint puller.
  10. Step 11
    PEUGEOT 306 2.0 HDI 90 Track Rod End replacement: online guides and video tutorials
    Screw the end out of the tie rod.
  11. Step 12
    Replacing Track Rod End on Peugeot 306 7a 2003 2.0 HDI 90 by yourself
    Clean the mounting seats of the tie rod end. Use a wire brush. Use WD-40 spray.
  12. Step 13
    306 Hatchback (7A, 7C, N3, N5) 1.9 D 1993 Track Rod End DIY replacement workshop manual
    Screw on a new tie rod end.
    Replacement: track rod end – PEUGEOT 306 Hatchback (7A, 7C, N3, N5). AUTODOC experts recommend:
    While installing the steering rod end remember to make the same number of turns or to leave the same length of thread showing as per your measurements.
  13. Step 14
    How to change Track Rod End on PEUGEOT 306 Hatchback (7A, 7C, N3, N5) 1994 - tips and tricks
    When deinstalling, mark or measure the precise position of the ball joint on the track rod, or count the number of turns in order to prevent misalignment afterward. Use a vernier caliper.
  14. Step 15
    Step-by-step recommendations for DIY replacement Peugeot 306 7a 1995 1.9 D Track Rod End
    Connect the tie rod end to the steering knuckle.
  15. Step 16
    DIY replacement of Track Rod End on PEUGEOT 306 Hatchback (7A, 7C, N3, N5) 1.9 DT 1996 is not an issue anymore with our step-by-step tutorial
    Screw on the fastening nut that connects the tie rod end to the steering knuckle. Use a drive socket #17. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the PEUGEOT 306 Hatchback model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
PEUGEOT 306 Hatchback (7A, 7C, N3, N5) Track Rod End replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY PEUGEOT 306 Hatchback (7A, 7C, N3, N5) Track Rod End replacement - online guide
Tips & tricks for your PEUGEOT 306 Hatchback (7A, 7C, N3, N5)
View more
  • How to change Tie rod end on PEUGEOT 306 Hatchback (7A, 7C, N3, N5) 1.9 DT - replacement tricks
    5 most common causes of oil leaks | AUTODOC tips
  • Changing Outer tie rod Peugeot 306 7a 2.0 HDI 90 - Replacement Tips
    TOP 6 WD-40 lifehacks | AUTODOC tips
  • Maintenance Hacks - PEUGEOT 306 Hatchback (7A, 7C, N3, N5) 1.4 Track rod end ball joint replacement guide
    How to check your head gasket | AUTODOC
  • Replace Outer tie rod end on Peugeot 306 7a - free video tips
    Car checks you need to carry out on your car after the winter | AUTODOC tips