Important!
This replacement procedure can be used for:
FIAT Doblo Estate (119_, 223_) 1.2 (223AXA1A), FIAT Doblo Estate (119_, 223_) 1.9 D (223AXB1A), FIAT Doblo Estate (119_, 223_) 1.9 JTD (223AXE1A), FIAT Doblo Estate (119_, 223_) 1.6 16V (223AXD1A), FIAT Doblo Estate (119_, 223_) 1.9 JTD, FIAT Doblo Estate (119_, 223_) 1.3 D Multijet, FIAT Doblo Estate (119_, 223_) 1.9 D Multijet, FIAT Doblo Estate (119_, 223_) 1.4, FIAT Doblo Estate (119_, 223_) 1.6 Natural Power, FIAT Doblo Estate (119_, 223_) 1.6, FIAT Doblo Estate (119_, 223_) 1.3 JTD, FIAT Doblo Estate (119_, 223_) 1.3 JTD 16V, FIAT Doblo Estate (119_, 223_) 1.6 Natural Power (223AXD1A) View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Track Rod End for Doblo Estate (119_, 223_) and other FIAT models
Tools
Replacement: track rod end – FIAT DOBLO (119). List of the tools you'll need:
Wire brush
WD-40 spray
Copper grease
Drive socket # 17
Combination spanner #22
Wheel impact socket #17
Torque wrench
Tap wrench
Ball joint puller
Vernier caliper
Wheel chock
Replacement: track rod end – FIAT DOBLO (119). AUTODOC recommends:
  • Replace tie rod ends in pairs.
  • The replacement procedure is identical for the right and left tie rod ends.
  • During the installation process, use only new bolts and nuts.
  • All work should be done with the engine stopped.
Replacement: track rod end – FIAT DOBLO (119). Recommended sequence of steps:
  1. Step 1
    How to change Track Rod End on FIAT Doblo 119 2001 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace FIAT Doblo Estate (119_, 223_) 1.9 JTD 2002 Track Rod End - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Important! Hold the wheel while unscrewing the fastening bolts. FIAT DOBLO (119)
    Step 5
    FIAT Doblo 119 1.3 D Multijet 2003 Track Rod End replacement: free workshop manuals
    Remove the wheel.
  4. Step 6
    Changing Track Rod End on FIAT Doblo Estate (119_, 223_) 1.4 2004 by yourself
    Clean the fastener connecting the tie rod end to the steering knuckle. Use a wire brush. Use WD-40 spray.
  5. Step 7
    How to remove FIAT DOBLO 1.9 D Multijet 2005 Track Rod End - online easy-to-follow instructions
    When deinstalling, mark or measure the precise position of the ball joint on the track rod, or count the number of turns in order to prevent misalignment afterward. Use a vernier caliper.
  6. Step 8
    How to replace Track Rod End on FIAT Doblo Estate (119_, 223_) 2006: download PDF manuals and video instructions
    Loosen the lock nut securing the tie rod end to the tie rod. Use a combination spanner #22.
  7. Step 9
    How hard is it to do yourself: Track Rod End replacement on FIAT Doblo 119 1.2 2007 - download illustrated guide
    Unscrew the end fastening nut to the steering knuckle. Use a drive socket #17. Use a tap wrench.
  8. Step 10
    Need to know how to renew Track Rod End on FIAT DOBLO 2008? This free workshop manual will help you to do it yourself
    Disconnect the tie rod end from the steering knuckle. Use a ball joint puller.
  9. Step 11
    Changing of Track Rod End on FIAT Doblo 119 2009 won't be an issue if you follow this illustrated step-by-step guide
    Screw the end out of the tie rod.
  10. Step 12
    FIAT DOBLO 1.3 JTD 16V Track Rod End replacement: online guides and video tutorials
    Screw on a new tie rod end.
    Replacement: track rod end – FIAT DOBLO (119). AUTODOC experts recommend:
    While installing the steering rod end remember to make the same number of turns or to leave the same length of thread showing as per your measurements.
  11. Step 13
    Replacing Track Rod End on FIAT Doblo 119 2011 1.9 JTD by yourself
    Clean the mounting seat of the tie rod end. Use a wire brush. Use WD-40 spray.
  12. Step 14
    Doblo Estate (119_, 223_) 1.9 D Multijet 2012 Track Rod End DIY replacement workshop manual
    Treat the fastener connecting the tie rod end to the steering knuckle. Use copper grease.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the FIAT Doblo I Estate (119, 223) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
FIAT Doblo Estate (119_, 223_) Track Rod End replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY FIAT Doblo Estate (119_, 223_) Track Rod End replacement - online guide
Tips & tricks for your FIAT Doblo Estate (119_, 223_)
View more
  • How to change Tie rod end on FIAT Doblo Estate (119_, 223_) 1.9 D - replacement tricks
    How to start a car after a long idle period | AUTODOC tips
  • Changing Outer tie rod FIAT Doblo 119 1.9 JTD - Replacement Tips
    What to do if your car's air conditioning isn't working properly | AUTODOC tips
  • Maintenance Hacks - FIAT Doblo Estate (119_, 223_) 1.3 D Multijet Track rod end ball joint replacement guide
    How to polish an old engine valve cover to a shiny finish | AUTODOC Tips
  • Replace Outer tie rod end on FIAT Doblo 119 - free video tips
    How to wash your car in winter | AUTODOC tips