Important!

This replacement procedure can be used for:
FORD Transit Mk7 Minibus (V363, FAD, FBD) 2.2 TDCi RWD, FORD Transit Mk7 Minibus (V363, FAD, FBD) 2.2 TDCi RWD, FORD Transit Mk7 Minibus (V363, FAD, FBD) 2.2 TDCi RWD, FORD Transit Mk7 Minibus (V363, FAD, FBD) 2.2 TDCi, FORD Transit Mk7 Minibus (V363, FAD, FBD) 2.2 TDCi, FORD Transit Mk7 Minibus (V363, FAD, FBD) 2.2 TDCi 4x4, FORD Transit Mk7 Minibus (V363, FAD, FBD) 2.2 TDCi, FORD Transit Mk7 Minibus (V363, FAD, FBD) 2.0 EcoBlue, FORD Transit Mk7 Minibus (V363, FAD, FBD) 2.0 EcoBlue, FORD Transit Mk7 Minibus (V363, FAD, FBD) 2.0 EcoBlue, FORD Transit Mk7 Minibus (V363, FAD, FBD) 2.2 TDCi RWD, FORD Transit Mk7 Minibus (V363, FAD, FBD) 2.0 EcoBlue RWD, FORD Transit Mk7 Minibus (V363, FAD, FBD) 2.0 EcoBlue RWD, FORD Transit Mk7 Minibus (V363, FAD, FBD) 2.0 EcoBlue mHEV, FORD Transit Mk7 Minibus (V363, FAD, FBD) 2.0 EcoBlue … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Track Rod End for Transit Mk7 Minibus (V363, FAD, FBD) and other FORD models

Alternative products

Track rod end

Replacement: track rod end – FORD TRANSIT Bus. List of the tools you'll need:

                      Wire brush
                    
                      WD-40 spray
                    
                      An all-purpose cleaning spray
                    
                      Ceramic grease
                    
                      Torque wrench
                    
                      22 mm combination spanner
                    
                      24 mm combination spanner
                    
                      25 mm combination spanner
                    
                      19 mm socket
                    
                      22 mm socket
                    
                      21 mm wheel impact socket
                    
                      Ratchet wrench
                    
                      Tommy bar
                    
                      Vernier caliper
                    
                      Ball joint separator
                    
                      Wheel chocks

Buy tools

Replacement: track rod end – FORD TRANSIT Bus. Tip from AUTODOC:

Replace the tie rod ends in pairs.
All the work should be carried out with the ignition switched off.

Replacement: track rod end – FORD TRANSIT Bus. Take the following steps:

Step 1

Secure the wheels with chocks.
Step 2

Loosen the wheel nuts. Use a 21 mm wheel impact socket. Use a tommy bar.
Step 3

Raise the car.

Warning!
If you are using a jack, make sure the car is parked on a hard, flat surface.Make sure to additionally secure the car with jack stands.
Step 4

Unscrew the wheel nuts.

Caution!
To avoid injury, hold up the wheel when unscrewing the nuts.
Step 5

Remove the wheel.
Step 6

Clean all tie rod end connections. Use a wire brush. Use WD-40 spray.
Step 7

Measure and note down the length of the exposed portion of the tie rod thread or the number of turns the tie rod end made when being unscrewed to prevent wheel misalignment during reassembly. Use a vernier caliper.
Step 8

Loosen the lock nut securing the tie rod end to the tie rod. Use a 22 mm combination spanner. Use a 24 mm combination spanner.
Step 9

Unscrew the nut connecting the tie rod end to the steering knuckle. Use a 22 mm socket. Use a ratchet wrench.
Step 10

Disconnect the tie rod end from the steering knuckle. Use a ball joint separator.
Step 11

Unscrew the tie rod end from the tie rod.
Step 12

Clean the mounting seats of the tie rod end. Use a wire brush. Use an all-purpose cleaning spray.
Step 13

Screw on a new tie rod end.

Replacement: track rod end – FORD TRANSIT Bus. AUTODOC recommends:
When installing the tie rod end, remember to maintain the same length of the exposed tie rod thread or turn the tie rod end the same number of times.
Step 14

Connect the tie rod end to the steering knuckle.
Step 15

Having adjusted the tie rod end to the correct position, secure it with the lock nut.
Step 16

Tighten the nut connecting the tie rod end to the steering knuckle. Use a 19 mm socket. Use a torque wrench. Tightening torque: 80 N·m.
Step 17

Tighten the tie rod end lock nut. Use a combination spanner #24. Use a combination spanner #25. Use a torque wrench. Tightening torque: 80 N·m.
Step 18

Clean the wheel rim mounting seat. Use a wire brush. Use an all-purpose cleaning spray.
Step 19

Treat the wheel hub surface that contacts the wheel rim. Use ceramic grease.
Step 20

Install the wheel.

Caution!
To avoid injury, hold up the wheel when screwing on the fastening nuts.
Step 21

Screw on the wheel nuts. Use a 21 mm wheel impact socket. Use a ratchet wrench.
Step 22

Lower the car and tighten the wheel nuts in a criss-cross pattern. Use a 21 mm wheel impact socket. Use a torque wrench. Tightening torque: 200 N·m.
Step 23

Remove the jack, jack stands, and wheel chocks.

Replacement: track rod end – FORD TRANSIT Bus. Professionals recommend:
After replacing the tie rod ends, it is necessary to have the wheels aligned.

Was this manual helpful?

Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.

Need New Tyres?

Find out which tyre and wheel sizes are compatible with the FORD Transit Mk7 Minibus (V363) model

FORD TRANSIT Bus tyre size

How to change the front anti-roll bar links on the FORD Transit V363 Minibus (FAD, FBD) – replacement guide

Free download PDF
1.46 MB
How to change front ball joint on FORD Transit Mk7 Minibus (V363) – replacement guide

Free download PDF
12.3 MB
How to change the serpentine belt on the FORD Transit V363 Minibus (FAD, FBD) – replacement guide

Free download PDF
788.48 KB
How to change rear windshield wipers on FORD Transit V363 Minibus (FAD, FBD) – replacement guide

Free download PDF
593.92 KB
How to change the engine thermostat on the FORD Transit Mk7 Minibus (V363) – replacement guide

Free download PDF
1.35 MB
How to change a rear brake caliper bracket on the FORD Transit Mk7 Minibus (V363) – replacement guide

Free download PDF
2.09 MB

How to change tie rod ends on the Ford Transit Mk7 van – replacement guide

Free download PDF
1.57 MB
How to change tie rod ends on the FORD Transit V363 Van (FCD, FDD) – replacement guide

Free download PDF
1.57 MB
How to change tie rod ends on the FORD Transit Mk5 Van (V184, V185) – replacement guide

Free download PDF
1.57 MB
How to change tie rod ends on the FORD Transit Mk6 Platform / Chassis (V347, V348) – replacement guide

Free download PDF
1.57 MB
How to change tie rod ends on the FORD Transit V363 Platform / Chassis (FED, FFD) – replacement guide

Free download PDF
1.57 MB
How to change tie rod ends on the FORD Transit Mk6 Minibus (V347, V348) – replacement guide

Free download PDF
1.57 MB

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

5 most common causes of oil leaks | AUTODOC tips

59K views

Published on: 30/03/2023
Top 7 signs of a bad starter

4K views

Published on: 20/03/2025
K2 ROTON wheel cleaner overview

3K views

Published on: 27/03/2025
How to tighten cylinder head bolts

7K views

Published on: 06/03/2025