
Disclaimer
How to change spark plugs on TOYOTA COROLLA Verso (ZER_, ZZE12_, R1_) – replacement guide
downloads:
2
Views:
31

Recommended replacement interval for the part category Spark plug : 4 year / 60000 km
Important!
This replacement procedure can be used for:
TOYOTA COROLLA Verso (ZER_, ZZE12_, R1_) 1.8 … View more
The steps may slightly vary depending on the car design.
TOYOTA COROLLA Verso (ZER_, ZZE12_, R1_) 1.8 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Spark Plug for COROLLA Verso (ZER_, ZZE12_, R1_) and other TOYOTA models
Spark plug
Alternative products

WD-40 spray
High-temperature anti-seize lubricant
Drive socket # 10
Drive socket # 14
Spark plug socket # 16
Ratchet wrench
Torque wrench
Clip removal tool
Fender cover
Replacement: spark plugs – TOYOTA COROLLA Verso (ZER_, ZZE12_, R1_). Tip from AUTODOC experts:
- The replacement procedure is the same for all spark plugs.
- All work should be done with the engine stopped.
Replacement: spark plugs – TOYOTA COROLLA Verso (ZER_, ZZE12_, R1_). Take the following steps:
- Step 1Open the bonnet.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Unscrew the fasteners of the windscreen wiper arms. Use a drive socket #14. Use a ratchet wrench.
- Step 4Remove the wiper arms.
- Step 5Remove the wiper arm covers. Use a clip removal tool.
- Step 6Treat the fasteners of the windscreen wiper linkage. Use WD-40 spray.
- Step 7Detach the windscreen wiper connector.
- Step 8Unscrew the fasteners of the windscreen wiper linkage panel. Use a drive socket #10. Use a ratchet wrench.
- Step 9Unscrew the fasteners of the fuse box. Use a drive socket #10. Use a ratchet wrench.
- Step 10Remove the panel assembled with the windscreen wiper linkage.
- Step 11Clean the ignition coils.
- Step 12Unscrew the fasteners of the ignition coils. Use a drive socket #10. Use a ratchet wrench.
- Step 13Take out the ignition coils from the spark plug wells.Replacement: spark plugs – TOYOTA COROLLA Verso (ZER_, ZZE12_, R1_). AUTODOC recommends:Remember the sequence of steps for ignition coil demounting.
- Step 14Clean dirt, dust and debris from inside the spark plug wells.
- Step 15Unscrew the spark plugs. Use the spark plug socket #16. Use a ratchet wrench.
- Step 16Take out the spark plugs.
- Step 17Apply a thin layer of a special high temperature anti-seize lubricant to the threads of the new spark plugs.
- Step 18Install the new spark plugs into their mounting seats. Use the spark plug socket #16.
- Step 19Screw new spark plugs and tighten them. Use the spark plug socket #16. Use a torque wrench. Tighten it to 18 nm torque.Replacement: spark plugs – TOYOTA COROLLA Verso (ZER_, ZZE12_, R1_). Professionals recommend:Don't tighten the plugs with excessive force. Exceeding tightening torque can damage the thread connection. Be careful when working with a spark plug wrench. Its skewing can cause damage to the threaded connection.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the TOYOTA Corolla Verso (AR10) model
Popular maintenance tutorials for Toyota Corolla Verso
Complete guides for changing the Engine spark plug on different TOYOTA COROLLA models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your TOYOTA COROLLA Verso (ZER_, ZZE12_, R1_)
View more
- What to do if your check engine light is on | AUTODOC tips
- How to replace a timing chain yourself
- Checking the starter without removing it | AUTODOC tips
- DIY rear axle restoration | Drivetrain restoration – Part 2
Most commonly replaced car parts on TOYOTA COROLLA
Time to replace parts? Get even better deals in our Shop app.

SCAN ME